Firesense 63246 User manual

SAVE THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
ATTACH YOUR
RECEIPT HERE
Keep a copy of your proof of purchase
needed if you need to contact us
about warranty coverage.
Purchase Date:
Round Glass Guard Item#: 63246
12022019
Questions, problems, missing parts?
Before returning to your retailer, our exceptional customer service is available. English
and Spanish speaking.
Call toll-free (866)866) 985-7877 9 a.m. – 9 p.m., EST
Email [email protected]
Live chat www.wtliving.com 9 a.m. - 4 p.m., EST, Monday - Friday

Contact us for assistance: [phone] | www.wtliving.com 2
INFORMATION
BEFORE YOU BEGIN
Before beginning assembly, make sure all parts are present. Compare parts received with the “Package
Contents.” If any part is missing or damaged, do NOT attempt to assemble the product. Please read and
understand this entire manual before attempting to assemble, operate or install this product. If you have
any questions regarding the product, please contact customer service.
SAFETY INFORMATION
WARNING
DO NOT stand or allow children to stand on the assembled product. DO NOT tighten bolts completely
until instructed to do so. After final alignment, make sure all hardware is securely fastened. NEVER use a
power tool to assemble or tighten your item. Perform periodic checks to make sure the hardware is
secure and tighten if needed.
CAUTION
READ all instruction before beginning assembly. Failure to do so may result in faulty assembly and
potential injury. Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid
damaging the item.

Contact us for assistance: [phone] | www.wtliving.com 3
PART DESCRIPTION QUANTITY
AGlass Panel 4
HARDWARE CONTENTS
A
B
Bottom Bracket
Qty: 5
(4 for assembly + 1 extra)
C
Top Bracket
Qty: 5
(4 for assembly + 1 extra)
Screwdriver
Qty: 1
D

Contact us for assistance: [phone] | www.wtliving.com 4
ASSEMBLY
1
Hardware Used: C Top Bracket x1
2Continue to join Glass Panels one at a time by the same procedure
as in Step 1 until all four panels are in place to form a complete
circle. Once all four Glass Panels and top brackets are in place,
check the tightness of all 8 set-screws.
PREPARATION
1
2
Top Bracket
Hardware Used: C Top Bracket x3
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing, please contact Customer Service.
Carefully remove the wind guard from the packaging and inspect for any damage such as chips or cracks. Place glass panels
on a soft, flat surface to prevent any damage. Before assembly, ensure that each bracket has 2 set-screws, with silicon
inserts attached at the tip. Estimated Assembly Time: 30 Minutes | DO NOT over tighten hardware!
You will assemble the wind guard upside-down.
Loosen the set-screws in one Top Bracket C, then slide two Glass
Panels A into the bracket as shown.
Align bracket with lower edges of each glass panel. Ensure small
silicone pad is in place at tip of each set-screw – do NOT tighten
metal screw directly to the glass. Over-tightening may break glass!
Tighten set-screws until snug.

Contact us for assistance: [phone] | www.wtliving.com 5
ASSEMBLY
3
4
4
3
Hardware Used:  Bottom Bracket x4
Bottom Brackets
Carefully, using two people, turn the assembled wind guard
upright. Gently set the glass guard onto fire pit, positioning the
feet flat and level at the edges of the burner.
Be aware that the glass and hardware may become warm or
hot after prolonged burning of the fire pit and take reasonable
precautions to avoid burns.
Loosen set-screws and carefully slide Bottom Bracket B onto
glass with rubber foot pointed up. Position edge of glass panel
flush with bracket edge. Check that silicone guards are in
place, then secure all set-screws, making sure to not over-
tighten. Secure remaining three bottom brackets using the
same procedure.
CARE: When wind guard is completely cool, it may be
cleaned with a soft cloth or paper towel and standard glass
cleaner. Never spray cleaner or water on a hot wind guard, as
it could crack or shatter.

LIMITED WARRANTY
Customers in the Contiguous US
This product is warranted for a period of 1 year from original purchase date
against defects in materials and workmanship under normal use. This
warranty does NOT cover normal wear/weathering, exposure to water,
freezing temperatures, oils, fluids, or chemicals, OR use in a commercial
application if model is not designated as a commercial model. At Well
Traveled Living’s sole discretion, products under warranty will be repaired
and/or replaced at no charge to the customer. Returns sent back to Well
Traveled Living must be sent via prepaid freight in the original retail packaging.
For warranty service, contact Well Traveled Living at the address, phone
numbers or website and email listed in this owner’s manual. Be sure to have
your sales receipt, date of purchase and catalogue/model numbers available
when calling. All warranty service will be coordinated by Well Traveled
Living’s, Amelia Island, Florida service center. This warranty is extended only
to the original owner. Proof of purchase will be required before warranty
service is rendered. The sales receipt is the only valid proof of purchase. This
warranty only covers failures due to defects in materials or workmanship
which occur during normal use. Failures and/or damage which result from
accident, negligence, misuse, abuse, neglect, mishandling, alteration or
modification, failure to maintain, improper assembly or maintenance, service
by unauthorized agency or use of unauthorized components or damage that is
attributable to acts of God are NOT covered.
This limited warranty gives you specific legal rights and you may also have
other rights which vary from jurisdiction to jurisdiction. The provisions of the
United Nations Convention on Contracts for the Sales of Goods shall not apply
to this limited warranty or the sale of products covered by this limited
warranty.
• THERE ARE NO EXPRESS WARRANTIES EXCEPT AS
LISTED
• PURCHASER ASSUMES ALL RISKS IN THE
ASSEMBLY AND OPERATION OF THIS UNIT
• FAILURE TO FOLLOW WARNINGS AND
OPERATIONAL INSTRUCTIONS CONTAINED IN
THIS MANUAL CAN RESULT IN SEVERE PROPERTY
DAMAGE AND/OR PERSONAL INJURY
• IN NO EVENT WILL WELL TRAVELED LIVING, OR
ITS DIRECTORS, OFFICERS OR AGENTS BE LIABLE
TO THE PURCHASER OR ANY THIRD PARTY,
WHETHER IN CONTRACT, IN TORT, OR ON ANY
OTHER BASIS, FOR ANY INDIRECT, SPECIAL,
PUNITIVE, EXEMPLARY, CONSEQUENTIAL, OR
INCIDENTAL LOSS, COST, OR DAMAGE ARISING
OUT OF OR IN CONNECTION WITH THE SALE,
MAINTENANCE, USE, OR INABILITY TO USE THE
PRODUCT, EVEN IF WELL TRAVELED LIVING OR
ITS DIRECTORS, OFFICERS OR AGENTS HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH LOSSES,
COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS,
OR DAMAGES ARE FORESEEABLE. IN NO EVENT
WILL WELL TRAVELED LIVING, OR
ITS OFFICERS, DIRECTORS, OR AGENTS BE LIABLE
FOR ANY DIRECT LOSSES, COSTS OR DAMAGES
THAT EXCEED THE PURCHASE PRICE OF THE
PRODUCT.
• SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
THE PURCHASER.
Important Notice
Do NOT return to place of purchase—for customer service and warranty
issues contact our Customer Service Center at [phone] or
[email protected], or go online and live chat at wtliving.com.
Hours are: 9 a.m. – 6 p.m., EST, Monday – Friday.
Distributed by:
Well Traveled Living
716 S 8th Street, Amelia Island, FL 32034
wtliving.com | [e-mail]
[phone]
Fire Sense®, Patio Sense,® Balkene Home,® Mojave Sun®, Vulcan®, and Well Traveled Living® are registered trademarks of Well Traveled Imports, Inc®.
All assembly instruction presentations are the property of Well Traveled Imports, Inc.
® and are protected by U.S. copyrights and trademarks. All rights
reserved.
EXTEND YOUR WARRANTY
When you purchase a Fire Sense or Balkene Home product, you have the peace of mind in
knowing that it comes with a one-year warranty. Extend your warranty for an additional year
when you write a review of your purchase on www.wtliving.com within 365 days of purchase.