Fisher & Paykel EB24 User manual

USER GUIDE
US CA
AUTOMATIC BEAN TO CUP
COFFEE MACHINE
EB24 model

1
CONTENTS
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this user guide may
not be available in all markets and are
subject to change at any time. For current
details about model and specification
availability in your country, please go to
our website fisherpaykel.com or contact
your local Fisher & Paykel dealer.
Registration
Register your product with us so we can
provide you with the best service possible.
To register your product visit our website:
fisherpaykel.com
Appliance parts 2
Safety and warnings 4
First use 7
Menu settings 11
Making coffee 15
Making cappuccinos and milk-based coffees 19
Delivering hot water 22
Steam delivery 23
Customizing beverages 24
Memorizing your personal profile 25
Cleaning 26
Descale 32
Water softener filter 35
Displayed messages 37
Troubleshooting 42
Warranty and service 44

5
SAFETY AND WARNINGS
descaling.
● Only use the descaling tablets. Take care to use the correct mixture of water and
descaler, otherwise it may cause damage.
● Never make coffee, hot water or steam when the appliance is extracted. Always make
sure the appliance is inactive before extracting it. Failure to observe this precaution
could lead to damage to the appliance! The only exception is adjusting the coffee
mill which must be done with the machine out (see the section “Adjusting the coffee
mill”).
● Do not place on or near a hot gas or electric burner, or in a heated oven.
● Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
● Do not use appliance for other than intended use.
● To reduce the risk of fire, do not mount unit over or near any portion of a heating or
cooking appliance.
● To reduce the risk of electric shock, do not mount over a sink.
SAVE THESE INSTRUCTIONS

20
MAKING CAPPUCCINOS AND MILK-BASED COFFEES
Adjusting the amount of froth
Turn the froth adjustment dial on the milk container lid to adjust the amount
of froth delivered while making milk-based coffees. Follow the recommendations
in the table below:
DIAL POSITION FROTH RECOMMENDED FOR
None Latte / Hot milk
Minimum Latte or Macchiato
Maximum Cappuccino
Making cappuccinos and milk-based coffees automatically
1Fill the milk container and attach it as described above.
2Select the required beverage from the display:
● Cappuccino
● Latte
● Flat white
● Latte macchiato
● Espresso macchiato
● Hot milk
3A message on the display instructs you to turn the froth adjustment dial according
to the froth required by the original recipe. Turn the dial on the milk container lid
and confirm the selection by pressing .
4After a few seconds, preparation begins automatically and an image of the selected
drink appears on the display, together with a progress bar which gradually fills to
indicate the stage of completion.
General controls
● BACK: will cancel preparation completely and go back to the home screen.
● CANCEL: will cancel milk or coffee delivery and move on to the next delivery stage
(if applicable) to complete the beverage.
● EXTRA will increase the size of coffee in the cup. This option is available at the end
of the delivery.
● Preparation of each coffee can be customized (see sections ‘Customizing the beverages’
and ‘Memorising your personal profile’).
● Do not leave the milk container out of the refrigerator for long periods.
41°F (5°C) is the ideal milk temperature. The warmer the milk the poorer the quality
of froth produced.