Fisher & Paykel CI122DTB User manual

Using Your Induction Cooktop
CI122DTB Model CI244DTB Model
CI304DTB Model
CI365DTB Model
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
1

Cooking
Zone Zone Diameter Power Powerboost Recommended Minimum Pan Size
15 3/4" (145 mm) 1400 W 2200 W * 4 3/4" (120 mm)
27 1/8" (180 mm) 1850 W 3000 W * 5 3/4" (145 mm)
38 1/4" (210 mm) 2300 W 3700 W * 5 3/4" (145 mm)
4
7 1/8" / 10 1/4"
(180 mm / 260
mm)
1850 W / 2600
W
3000 W / 5500 W
*
5" (125 mm) (inner zone)
9 7/8" (250 mm) (dual zone)
5SmartZone 2100 W 3700 W ** 4 3/4" (120 mm) (un-bridged)
9 7/8" (250 mm) (bridged)
* Maximum output when set on PowerBoost.
** PowerBoost is not available when cooking zones are bridged.
See ‘Using Your Cooktop’s Special Features.’
Control Panel
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
2

To Select a Setting on the Selector:
Touch at one point to “jump”
to a specific setting.
Or
Slide your finger along the selector.
To Start Cooking:
1. Touch and hold the COOKTOP ON/OFF control for 2
seconds.
A white indicator light above the control will glow.
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
3

2. Touch the COOKING ZONE ON/OFF control of the
cooking zone you wish to use.
A white indicator light above the control will glow.
3. Place a suitable pan on the cooking zone.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Always place small pans in the
center of the cooking zone.
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
4

4. Select a heat setting by touching or sliding the setting
selector with your finger.
• If you don’t choose a heat setting within 20 seconds,
the cooktop will automatically turn off. Start with step
1 again.
• You can modify the heat setting at any time during
cooking.
If a Display Flashes
Alternately with the Heat Setting
This means that:
• you have not placed a pan on the correct cooking zone or
• the pan you’re using is not suitable for induction cooking or
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
5

Dual Zone Cooking (CI365DTB models only)
When using a small pot on the dual cooking zone, be sure to center it so that the inner zone will detect the pan. If the
pan covers the outer zone, then the outer zone will automatically switch on.
SmartZones (CI122DTB & CI244DTB models only)
The SmartZones are large. You may place several small pots on the SmartZone and they will be detected as if they
were one large pot.
The whole of the SmartZone is activated when a pot is detected. This means that other
magnetizable items (such as cutlery) sitting in the cooking zone will heat up. Never leave
cutlery or other magnestizable items on your cooktop.
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
6

When You Have Finished Cooking:
1. Turn the COOKING ZONE off by touching the
COOKING ZONE ON/OFF control.
2. Turn the whole COOKTOP off by touching the
COOKTOP ON/OFF control.
3. Beware of hot surfaces
will flash in the window of any cooking zone that is too hot
to touch. It will remain on and steadily lit even when the
cooktop is turned off. It will disappear when the surface
has cooled down to a safe temperature.
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
7

Locking the Controls
• You can lock the controls to prevent unintended use (for example children accidentally
turning cooking zones on).
• When the controls are locked, all controls except the COOKTOP ON/OFF control are
disabled.
To Lock the Controls:
1. Make sure that the cooktop is turned on but no cooking zone is in use.
2. Touch and hold the keylock control
for 5 seconds. The white indicator light above the control comes on, indicating that the controls are locked.
The cooktop will automatically turn off after 20 seconds, but the controls will still be locked
when you turn the cooktop on again.
If any controls are accidentally touched while the cooktop is locked the white ‘lock’ indicator light will flash and the
cooktop will remain locked.
To Unlock the Controls:
1. Make sure the cooktop is turned on.
2. Touch and hold the keylock control
for 3 seconds. The white indicator light above the control goes out.
3. You can now start using your cooktop.
https://producthelp.fisherpaykel.com/us/Cook/Cooktops/Induction/Two_Burners/CI122DTB2/User_Guide_CI122DTB2/04_usin…
Updated: Thu, 11 Nov 2021 20:22:22 GMT
Powered by
8