Fisher & Paykel CI302DTB Guide

Using your induction cooktop
CI302DTB model CI603DTB model CI604DTB model
CI754DTB model
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
1

CI905DTB2 model CI905DTB3 model
Cooking Zone Zone Diameter Power Powerboost Recommended Minimum Pan Size
145 mm 1400 W 2200 W * 120 mm
180 mm 1850 W 3000 W * 145 mm
210 mm 2300 W 3700 W * 145 mm
180/260 mm 1850/2600 W 3000/5500 W * 125 mm (inner zone)
250mm (dual zone)
SmartZone 2100 W 3700 W ** 120mm (un-bridged)
250mm (bridged)
* Maximum output when set on PowerBoost.
** PowerBoost is not available when cooking zones are bridged. See ‘Using your cooktop’s
special features.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
2

Control panel
To select a setting on the selector:
Touch at one point to “jump” to a specific setting OR slide your finger along the selector.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
3

To start cooking
Touch and hold the ON/OFF control for 2 seconds.
A white indicator light will glow.
will appear in the cooking zone displays.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
4

Place a suitable pan on the cooking zone you wish to
use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Always place small pans in
the centre of the cooking
zone.
Select a heat setting by touching or sliding the setting
selector with your finger.
• If you don’t choose a heat setting within 20 seconds,
the cooktop will automatically turn off. Start with
step 1 again.
• You can modify the heat setting at any time during
cooking.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
5

If a display flashes
alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or
• the pan you’re using is not suitable for induction cooking or
• the pan is too small or not properly centred on thecooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.
Dual zone cooking (CI905DTB & CI603DTB models only)
When using a small pot on the dual cooking zone, be sure to centre it so that the inner zone will detect the pan. If the
pan covers the outer zone, then the outer zone will automatically switch on.
SmartZones (CI905DTB3, CI604DTB & CI302DBT models only)
The SmartZones are large. You may place several small pots on the SmartZone and they will be detected as if they
were one large pot.
The whole of the SmartZone is activated when a pot is detected. This means that other
magnetisable items (such as cutlery) sitting in the cooking zone will heat up. Never leave
cutlery or other magnestisable items on your cooktop.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
6

When you have finished cooking
Turn the cooking zone off by touching or sliding down
to
.
Make sure the display shows
Turn the whole cooktop off by touching the ON/OFF
control.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
7

.
Beware of hot surfaces
will flash in the window of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the
cooktop is turned off. It will disappear when the surface has cooled down to a safe temperature.
Locking the controls
• You can lock the controls to prevent unintended use
(for example children accidentally turning cooking
zones on).
• When the controls are locked, all controls except the
ON/OFF control are disabled.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
8

To lock the controls
1. Make sure that the cooktop is turned on but no cooking zone is in use.
2. Touch and hold the keylock control
for 5 seconds. The white indicator light above the control comes on, indicating that the controls are locked.
The cooktop will automatically turn off after 20 seconds, but the controls will still be locked
when you turn the cooktop on again.
If any controls are accidentally touched while the cooktop is locked the white ‘lock’ indicator light will flash and the
cooktop will remain locked.
To unlock the controls
1. Make sure the cooktop is turned on.
2. Touch and hold the keylock control
for 3 seconds. The white indicator light above the control goes out.
3. You can now start using your cooktop.
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi…
Updated: Tue, 26 Jul 2022 06:17:43 GMT
Powered by
9