Fisher & Paykel DW60FC2X1 User manual

Using your Dishwasher - Quick Reference
Details the process behind starting a wash (discarding food scraps, adding detergent, and selecting wash modifiers) as
well as start and stop your dishwasher.
tarting a wash
1. Discard food scraps and load dishes carefully
• crape large food particles off (e.g. bones, fruit
stones) and remove any foreign objects (e.g.
toothpicks, strings, paper).
• To help with wash performance, arrange dishes so
they are evenly spaced and not nesting.
For more detail, see user guide:
‘Caring for your dinnerware’ and ‘Loading’.
2. Add detergent
• Fill the detergent dispenser with powdered
detergent and close the dispenser door or place a
dishwasher tablet in the cutlery basket.
For more detail, see user guide:
'Water hardness and dishwashing',
'Wash programmes and detergent quantities', and
'Adding detergent'.
3. Turn power on
(also check water is turned on)
For more detail, see user guide:
'Controls and starting a wash
4. Check rinse aid level, refill if necessary
• If rinse aid level is low, the rinse aid indicator on
display will light up.
◦ Press the button to snap the dispenser cover
open
◦ Pour rinse aid into the circular opening (up to
the MAX marking)
◦ Wipe up any spills and click shut the cover.
For more detail, see user guide:
'Using rinse aid
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC2X1/Quick_ tart_Guide_DW60FC2X1/03_Using_your_…
Updated: Thu, 28 Jul 2022 05:48:20 GMT
Powered by
1

5. Check that nothing obstructs the spray arms,
then close the door firmly
6. Select wash programme
• Press
to scroll through the wash programmes
Auto enses the optimal wash program for your dishes
Normal (Default) Dishes with normal soils for optimum wash and dry performance
Normal Eco Dishes with normal soils for optimum energy and water usage
Fast A fast wash for lightly soiled dishes
Heavy Heavily soiled pots, pans and dishes
Rinse Prevents odors and soils from drying on dishes
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC2X1/Quick_ tart_Guide_DW60FC2X1/03_Using_your_…
Updated: Thu, 28 Jul 2022 05:48:20 GMT
Powered by
2

7. Start wash
• Press
to start the wash programme
OR set Delay start
• Press
to enter delay start. Press
again to increase the time (in
hours).
For more detail, see user guide:
'Setting Delay start'
To cancel a wash once it has started
• Press
to cancel the programme.
- - - will show in the display, then
the wash progress indicators will go
out and the display will turn off.
• If you wish, you can start a different
programme.
To pause and restart a wash
programme
• Press to pause the programme.
• The programme status (eg
Wash) will flash while the
dishwasher is paused. Open the
door very slowly.
There is
a risk of
being
sprayed
with hot
water.
Do not
fully
open
the door
until the
spray
arms
have
stopped
rotating.
• Load, remove, or rearrange any
dishes if needed.
• Press
to restart the programme. If the
dishwasher is not restarted within
7 minutes, it will then beep until
the cycle is restarted.
After the wash has ended
1. The dishwasher will beep. The display will show
. After 30 seconds the display will turn off.
2. Open the door slightly and leave ajar to help
drying. Once cooled, unload dishes carefully
For more detail, see user guide:
'After the wash'.
• Check condition of dishwasher, clean if necessary
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC2X1/Quick_ tart_Guide_DW60FC2X1/03_Using_your_…
Updated: Thu, 28 Jul 2022 05:48:20 GMT
Powered by
3

You may
need to
refill the
detergent
dispenser.
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC2X1/Quick_ tart_Guide_DW60FC2X1/03_Using_your_…
Updated: Thu, 28 Jul 2022 05:48:20 GMT
Powered by
4