Fisher & Paykel DE7060P2 User manual

QUICK REFERENCE GUIDE > DE7060P2 Date: 13.01.2022 > 1
Vented Dryer, 7kg
Series Seven | Vented
White
Dry your clothes efficiently without over drying, with multiple
ways to install and vent.
Auto-sensing detects moisture level to prevent under or over
drying
Ten different fabric care cycles including Delicate, Bulky, and
Freshen
Full reverse tumbling to help dry garments quicker and more
evenly
Drying rack for items that are too precious to tumble
DIMENSIONS
Height 830mm
Width 600mm
Depth 600mm
FEATURES & BENEFITS
Auto-sensing technology
Auto-sensing prevents over-drying by sensing moisture levels
inside the drum and shutting off automatically. This helps clothes
last for longer and reduces energy consumption.
Cares for clothes
This dryer has a cycle to suit every type of load including
Delicate, Bulky and Sports. Select a cycle with the easy to use
SmartTouch™ control dial.
Simple installation
Vent out either the front or the back of this dryer. A wall
mounting kit is included and the control panel can be inverted
easily.
Drying rack
This model comes with a drying rack, perfect for those items that
are too precious to tumble.
Reverse tumbling
Reverse tumbling alternates direction to help garments move
freely so they dry quicker and more evenly.
Easy loading
The robust dryer door features die cast metal hinges that open
to a full 180° for easy access and loading.
SPECIFICATIONS
Capacity
Capacity 7kg
Consumption
Energy rating 2 star
Dry Cycles
Air Dry •
Air dry/Air fluff cycle •
Bulky •
Easy Iron •
Everyday •
Heavy •
Rack dry •
Sports •
Time dry •
Wrinkle Free •

QUICK REFERENCE GUIDE > DE7060P2 Date: 13.01.2022 > 2
Features
Drying rack •
Easy access lint filter •
Easy invert panel •
End of cycle signal •
Keylock •
Lint filter indicator •
Progress indicator •
Safety restart switch •
SmartTouch™ control dial •
Wrinkle free option •
Performance
Auto sensing •
Choice of front or rear venting •
Dryness settings 5
Reverse tumbling •
Temperature settings 4
Product dimensions
Depth 600mm
Height 830mm
Width 600mm
Warranty
Parts and labour 2 years
SKU 93275
The product dimensions and specifications in this page apply to the specific product
and model. Under our policy of continuous improvement, these dimensions and
specifications may change at any time. You should therefore check with Fisher &
Paykel's Customer Care Centre to ensure this page correctly describes the model
currently available. ? Fisher & Paykel Appliances Ltd 2020
Other product downloads available at fisherpaykel.com
User Guide
Installation Guide
A PEACE OF MIND SALE
24 Hours 7 Days a Week Customer Support
T 1300 650 590 Wwww.fisherpaykel.com

INSTALLATION GUIDE / USER GUIDE
NZ AU SG ROW
VENTED CLOTHES DRYER
DE7060P & DE7060G models

1
CONTENTS
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this user guide
may not be available in all markets
and are subject to change at any time.
For current details about model and
specification availability in your country,
go to our website fisherpaykel.com or
contact your local Fisher & Paykel dealer.
Registration
Register your product with us so we can
provide you with the best service possible.
To register your product visit our website:
fisherpaykel.com
Introduction 2
Safety and warnings 3
Installation instructions 7
Dryer controls 18
Sorting and loading 19
Drying cycles 22
Drying cycle options 24
Cleaning your dryer 27
Before you call for service 28
Troubleshooting 29
Manufacturer’s warranty 33
Customer care 35

2
INTRODUCTION
Welcome to your Fisher & Paykel vented dryer.
Thank you for purchasing a Fisher & Paykel clothes dryer. We are proud of this dryer
andtrust it will serve you well for many years.
At Fisher & Paykel we aim to provide innovative products that are simple to use,
ergonomic, energy efficient and kind to the environment. Thousands of tonnes of
laundry and 80 years of laundry experience have been programmed into your dryer
tohelp give you the best possible performance.
Your new dryer gives you the convenience of tumble drying and your clothes
the advantage of not being subjected to the harsh overdrying effects of the sun.
Yourclothes will feel softer, retain their shape better and require less ironing.
Thisdryerhas been specifically designed to complement our front loading and top
loading Fisher&Paykel washers.
Your vented dryer has numerous cycles and options so you can perform many drying
tasks (including flat drying) with ease, allowing you to spend less time in the laundry.
All our dryers have the ability to automatically sense when your clothes are dry, meaning
your dryer is more efficient, making it kinder on your wallet and the environment.
Please take the time to read these instructions carefully before you begin using
yourdryer. Following the advice in this user guide will ensure you get the
performanceyou expect from your dryer and that you get the best possible results.
Keep these instructions for future reference and pass them on with your dryer, if it
changes hands.
We hope you enjoy your new dryer. We have certainly enjoyed designing it for you.
Vented clothes dryer

3
SAFETY AND WARNINGS
Meaning of symbols on the dryer
Warning: Risk of fire/Flammable materials
Read the instructions
!WARNING!
Fire Hazard
zOnly dry fabrics that have been washed with water.
zDo not use heat to dry articles containing foam rubber or similarly
textured rubber–like materials, dry on ‘Air Dry’.
zNever stop a tumble clothes dryer before the end of the drying
cycleunless all items are removed and spread out in order to dissipate
the heat.
zA clothes dryer produces combustible lint; the lint filter must be
cleaned before each drying cycle.
zFailure to follow the warnings outlined in these user instructions can
cause a fire hazard.
zFailure to follow these instructions can result in death or personal injury.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
zThe appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by a utility.
zWe do not recommend the use of extension cords or portable electrical outlet devices
for safety reasons.
zDo not touch or operate the machine with wet hands or with bare-feet.
zA damaged power cord must be replaced by a Fisher & Paykel trained and supported
service technician, its service agent or similarly qualified persons in order to avoid
a hazard. The appliance must not be operated until it is repaired, as there is risk of
electric shock.
zDo not operate this machine if it has been damaged during transport. Contact your
Fisher&Paykel dealer or Fisher & Paykel trained and supported service technician.

4
SAFETY AND WARNINGS
When using this appliance always exercise basic safety precautions including
the following:
Dryer use
zThis dryer has been designed for domestic use only, not for commercial applications,
such as massage/beauty clinics where there may be increased lint accumulation or
flammable materials in the atmosphere or load.
zThe tumble dryer is intended only for drying textile material washed in water.
zUndergarments that contain metal reinforcements should not be placed in the dryer.
Damage to the dryer can result if the metal reinforcements come loose during drying.
If you wish to dry these items use a drying rack or place in a garment bag.
zCheck and remove all objects from pockets, eg lighters and matches.
zNever dry rubber articles, or any plastic items or film, eg plastic lined tablecloths
andbaby bibs.
zClothes should go through the cool down/airing phase in the final part of the cycle.
This ensures items are left at a temperature where they will not be damaged. Ifforany
reason the dryer is stopped before the cycle has finished, dry clothes should be
removed immediately and not left in the dryer. Clothes should be quickly spread out
flat to cool so heat can dissipate, not left bunched up, eg in a clothes basket.
Do not operate this product without the lint filter in place or allow lint to accumulate
in or around the dryer.
zThis dryer is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless given supervision or instruction concerning the use of the dryer by a person
responsible for their safety.
zChildren should be supervised to ensure they do not play with the dryer.
zUnplug the machine from the power supply when it is not in use.
zDo not swing on or put weight on the door.
zYour dryer is designed to stop operating in the event of power outage.
When power isresumed, the machine will remain off until the ‘Power’ button is
pressed. To restart the dryer, press ‘Power’, select your drying cycle and touch .
zNever attempt to repair the dryer yourself.
zThe only user-removable parts of the dryer are the lint filter, drying rack and
reversible console. No other parts are designed to be removed by anyone other than
aFisher & Paykel trained and supported service technician.
zFor problems that cannot be solved from information in this User Guide, turn off and
unplug your dryer and contact a Fisher & Paykel trained and supported service technician.
zDo not overload your dryer beyond its rated capacity:
Model Maximum capacity
DE7060P G 7Kg
zNever put dripping wet clothes in or on top of the dryer as excess water may cause an
electrical hazard.
zDo not under any circumstances dry an electric blanket or any other electrical, plastic
or rubber items in your dryer, unless the care label specifically states it is safe to do
so. Never dry these items at high temperatures.

5
SAFETY AND WARNINGS
zDo not dry curtains in your dryer. Sunlight makes them brittle and they may
disintegrate during drying.
zDo not use the water collected in the water tank for drinking or food processing.
zNever run the dryer without the water tank in place.
zIf the water tank becomes full, the tumble dryer will pause drying and will sound an
alarm. You must empty the water tank before the dryer can continue drying. Empty
the tank, replace it back in the housing then touch to resume the cycle.
Lint
zAccumulated lint in the dryer can become a fire hazard; it also reduces the efficiency
of the dryer by causing longer drying times and increased power consumption.
zClean the lint filter before every load.
zEnsure the area around the dryer is clear of lint.
zAt regular intervals have the interior of the dryer cleaned of any accumulated lint.
This must be done by a Fisher & Paykel trained and supported service technician.
This must be done when the dryer installation is changed from free standing.
zThe dryer exhaust ducting should be inspected and cleaned periodically to remove
accumulated lint.
zIf the lint filter becomes damaged, contact your Fisher & Paykel trained and supported
service technician to arrange getting a new filter. Do not operate your dryer with a
damaged lint filter or without the filter in place, as this will cause damage to your dryer.
Installation
zThe dryer must be installed in a well-ventilated, dust-free environment.
zThe dryer must not be installed on any textured floor coverings (eg carpet, rugs) to
ensure that openings at the base of the machine are not obstructed.
zDo not install the dryer behind a lockable door, sliding door, or behind a door where
the hinge is on the opposite side to that of the dryer in such a way that the full
opening of the door is inhibited. Ensure the dryer door can always be opened fully.
zPlease refer to INSTALLATION INSTRUCTION section of this document for detailed
installation steps.

6
Spontaneous combustion
IMPORTANT!
To reduce the risk of fire in a tumble dryer the following should be observed:
zItems that have been spotted or soaked with vegetable oil or cooking oil are a fire
hazard and should not be placed in a tumble dryer.
zOil-affected items can ignite spontaneously, especially when exposed to heat sources
such as a tumble dryer. The items become warm causing an oxidation reaction in the
oil. This oxidation creates heat. If the heat cannot escape the items can become hot
enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat
from escaping creating a fire hazard.
zIf it is unavoidable that fabrics that contain vegetable oil, cooking oil or have been
contaminated by hair care products be placed in a tumble dryer, they should first be
washed in hot water with extra detergent — this will reduce, but not eliminate the fire
hazard. The cool down cycle of the dryer should be used to reduce the temperature
ofthese items. They should not be removed from the tumble dryer and piled or
stacked while hot.
zItems that have previously been cleaned in, washed in, soaked in or spotted with
flammable liquids or solids, eg petrol/gasoline, kerosene, dry cleaning solvents,
vegetable or cooking oil, acetone, denatured alcohol, some brands of spot removers,
turpentine, waxes and wax removers or other flammable or explosive substances
should not be placed in a tumble dryer.
zDo not dry unwashed items in the tumble dryer.
zThe dryer is not to be used if industrial chemicals have been used for cleaning.
zFabric Softeners or similar products should not be used in a tumble dryer to
eliminate the effects of static electricity, unless this practice is specifically
recommended by the manufacturer of the fabric softener product.
zRubber backed articles, foam rubber (latex foam), clothes or pillows fitted with
foam rubber pads, fibreglass, shoes containing rubber, shower caps, babies
waterproof napkin covers and waterproof textiles should not be dried in the dryer.
These materials can when heated produce fire by spontaneous combustion.
zWhen choosing to tumble dry a duvet/doona use low-medium heat only and make
sure the drum is not overloaded due to the risk of overheating and scorching.
zExhaust air must not be discharged into a flue which is used for exhausting fumes
fromappliances burning gas or other fuels.
z
Disposal
Extreme care must be taken when disposing of your old appliance to avoid hazards.
zWhen disposing of the dryer, it is recommended that the door is removed to avoid
children getting trapped inside, and that the electrical cable is cut off close to the dryer.
SAFETY AND WARNINGS

7
Read and follow the ‘Safety and warnings’ and ‘Installation instructions’ sections
carefully before using your dryer!
Accessories
Please check you received the following accessories with your Fisher & Paykel dryer.
Youwill find them inside the drum:
z1 x Drying rack
z1 x Installation guide/User guide
z1 x Wall mounting kit
z1 x Duct adapter
Unpacking
To ensure the best performance from your new dryer please follow the
instructionsbelow.
Removing the packaging
1Remove the outer packaging (including the polystyrene packer and plastic wrapping).
All packaging must be removed prior to use.
zEnsure packaging materials are kept out of reach of children.
zHelp protect the environment and dispose of the packaging fromaround
thedryer in an environmentally friendly manner.
2Tilt the dryer backwards and ‘walk’ it off the base one foot at a time.
Not doing so may cause damage to your floor and dryer.
3Remove all packaging and accessories from inside the drum and ensure
you remove protective covers from the door and console.
INSTALLATION INSTRUCTIONS

8
INSTALLATION INSTRUCTIONS
Venting
Correct installation is very important for all dryers to ensure maximum efficiency
andsafety.
Never run the dryer unless the airflow system is free from obstruction.
There must be adequate ventilation to avoid the back flow of gases into the room
fromappliances burning fuels, including open fires, when operating the dryer.
Exhaust air must not be discharged into a flue which is used for exhausting fumes
fromappliances burning gas or other fuels.
External venting
Your dryer has been designed to be vented outside to provide the following advantages:
zEnsures optimum efficiency by preventing recirculation of moist air.
zEliminates condensation on walls and ceilings.
zReduces the chance of lint being sucked into the dryer.
zPrevents lint and other fine particles being blown into the room.
All external venting systems should be:
zMade from 100mm diameter flexible foil sleeved with a galvanised metal pipe where
thevent system goes through the wall, or 100mm diameter galvanised metal piping.
zExhausted outside and not into another confined space, eg the roof cavity of a house.
zFitted with a vent cap outside to stop rain water entering the dryer exhaust system.
zAngled to avoid condensation running back into the dryer.
zThe vent system should be a maximum of 2 metres with no more than three 90⁰ bends.
zVent systems over 2 metres long require special installation. Contact a Fisher & Paykel
trained and supported service technician.
Internal venting
The dryer is set up in the factory for front venting. If front venting is used there must be
adequate ventilation to avoid the build up of moisture in the room, which can affect the
performance of the dryer. Venting must comply with local by-laws and regulations.

9
INSTALLATION INSTRUCTIONS
Installation options
There are two different ways your dryer can be positioned.
Freestanding or inverted and mounted on a wall.
Free standing
The dryer stands on the floor and can easily be moved into position.
1Move the dryer into the desired position. Do not lift the dryer by the top panel.
2Have a minimum clearance on all sides of at least 20mm.
3
Have a minimum clearance at the rear of 75mm.
The spacers from the accessory wall mounting kit
can be used to set thisdistance.
4Install the dryer on a stable and level floor.
Free standing venting options
Note: the vent system should be less than twometres
long with no more than three 90⁰ bends.
Before a rear venting option is installed the dryer
must be changed from the front venting factory setup.
Remove the outlet grille from the front left-hand
sideand replace with the outlet cover fromthe rear
left-hand side. These covers should begently pried
atthe sides to prevent damage.
External venting
The dryer is vented with a kit that can be positioned
toremove air to the side.
The dryer is vented directly through the wall using
a ducting kit in combination with the duct adaptor
supplied with the dryer.
The dryer is vented through a window using a ducting
kit in combination with the duct adaptor supplied with
the dryer. This requires the dryer to be a minimum
distance of 140mm from the wall to ensure the ducting
is not restricted with tight bends or can be crushed.
Internal venting
Front venting is the only recommended option for
venting into the room. The dryer is set up for front
venting when it leaves the factory.
Note: where possible all efforts should be made to
vent the dryer externally to avoid moisture build up
around the dryer. External venting with kit part
number PD-F0408
External venting with kit part
number PD-SVHCW4
External venting with kit part
number PD-DK4W

10
INSTALLATION INSTRUCTIONS
Inverted wall mounting installation
Your dryer has been designed to be inverted and mounted on the
wall above a washer or tub. A wall mounting kit must be used.
Inverting allows access to the dryer control panel.
Tools and parts required:
zDrill and 3mm bit
zPhillips head screwdriver.
Wall mounting kit includes:
z2 x Plastic spacers
z2 x Wall hanging brackets
z2 x Hanging hook
z4 x Wood screws
z6 x Screws for hanging hooks
and plastic spacers.
Inverted wall mounting
Min. 50mm clearance
Max. lid open height 880mm min. clearance to ceiling
Min. 50mm clearance
DE7060G = 612mm
DE7060P = 618mm

11
INSTALLATION INSTRUCTIONS
Inverting the panel
1
Unplug your dryer from the wall.
2
Invert the panel of the dryer by unscrewing the screws on the side of the console (A).
3Remove the console from the dryer.
4Unscrew six screws on the inside of the console (B).
5Rotate the grey panel 180˚ (C).
6Re-screw the six screws on the inside of the console.
7Align the console by placing the hooks into the spaces on the dryer.
8Ensure the wiring is firmly pressed into the clips (D).
9Re-screw the console to the dryer.
A B
C
D

12
INSTALLATION INSTRUCTIONS
555mm
835mm
Mounting dryer on wall
1Determine the position of the dryer on the wall and mark the bracket position.
Aminimum of 50mm is needed between the top of the dryer and the ceiling for ease
of installation. If mounting above a washing machine, allow sufficient room to open
thelid of the washer. Refer to page 10 for lid clearances.
A
555mm
From centre
of top hole
From bottom
of dryer
C
B
2Fix the wall hanging
brackets to the wall
securely, eg into the stud.
Ifthe studs are too far
apart, fit a timber slat to
the studs and then mount
the brackets onto the
slat. Add the same slat
under the two spacers.
The distance between the
centre of each bracket is
555mm (A).
3To install the hooks onto
the dryer, remove one
screw from each side (B),
reuse these with two more
(each side) from the kit to
fasten the hooks in place.
4Remove plastic plugs
from the back of the dryer
and screw the spacers
provided in place (C).
5With assistance, mount the
dryer on the wallbrackets.

13
INSTALLATION INSTRUCTIONS
Before a rear venting option is installed the dryer must be changed from the
frontventing factory setup. Remove the outlet grille from the front left-hand side
andreplace with the outlet cover from the rear left-hand side. These covers should
begently pried at the sides to prevent damage.
External venting options
zThe dryer can be vented with a kit that can
bepositionedtovent upwards or to the side.
Kit part number PD-DK4W.
zThe dryer can be vented directly through the wall
withKitpart number PD-SVHCW4, in combination
withthe ductadaptor supplied with the dryer.
Note: the vent system should be a maximum of 2 metres
with no more than three 90⁰ bends.
Internal venting
Front venting is the only option for internal venting.
The dryer is set up for front venting when it leaves
thefactory.
Note: all efforts should be made to vent the dryer
externally, if possible, to avoid moisture build up in
theareaaround the dryer.
Electrical connection
1This appliance must be connected to a 220V – 240V,50Hz,
sinusoidal, 10Aelectricalsupply.
2Uncoil the power cord, remove and discard the plastic pin
cover and plug into a powersocket.
3Connect the appliance to an earthed outlet protected
byafuse of suitable capacity.
zCheck the power cord for damage and make sure it is not
squashed or twisted when installing the dryer.
zAlways remove the power cord from the power socket by the plug, not by the cord.
Through-wall
mounted ducting
Wall mounting ducting

14
INSTALLATION INSTRUCTIONS
Completing the installation
Installation test cycle
Ensure the installation test cycle is completed before you dry any items in your dryer.
This is to check that your dryer is installed correctly and that it is functioning properly
prior to use.
1Turn your dryer on by pressing the ‘Power’ button.
2Select the ‘Time Dry’ cycle for 30minutes. Ensure the drum is empty and the door is
closed (you will hear it click shut).
3Touch the button. The drum will start rotating.
zObserve the dryer for any problems.
zThe dryer will beep and display any faults on the screen if there are any problems. Refer
to page 28.
4At the completion of the cycle open the door and check that there is warmth inside the
dryer. This indicates the dryer is operating normally.
If there are any problems, you must address these before proceeding with normal use.
The dryer will automatically turn off at the end of the cycle if there are no problems.
Before you start, it is a good idea to go through the following checklist:
1Has the packaging been removed?
2Is the lint filter correctly in place?
3Has the power cord been connected to an appropriate power supply and the power
turned on?
4Have you performed the installation test cycle?

15
INSTALLATION INSTRUCTIONS
Product specifications
DE7060G DE7060P
Capacity (kg)* 7 7
DIMENSIONS (mm)
Width 600 600
Depth 571 578
Height 825 825
ELECTRICAL
Volts 220 – 240 220 – 240
Hz 50 50
Amps (maximum) 10 10
Rated Power (W) 1770 1770
* Capacity refers to the maximum dry weight of items the dryer can dry at any one time.
Note: some cycles have a lower maximum capacity (see the ‘Drying cycles’ section).
Maximum capacity according to AS/NZS 2442.1:1996.

16
INSTALLATION INSTRUCTIONS
zCheck the lint filter is clean before every load. Ensure it is replaced correctly
beforeusing your dryer.
zThe lint filter indicator light will flash at the beginning of every cycle when the
machine is switched on, as a reminder to check the lint filter.
zSort and load items into the dryer drum, ensuring no items are in the way of the door.
Close the door.
1Press ‘Power’ to activate your dryer.
2Your dryer will default to the ‘Everyday’ cycle. Select your desired drying cycle by
turning the SmartTouch™ Control Dial (DE7060P only) or gently touching the cycle
button of your choice.
3Select your preferred drying options, using the SmartTouch™ buttons on the
right hand side of the panel (if you wish to select options different from the
defaultoptions for thecycle).
4Touch the button to start the cycle.
1
DE7060G dryer control panel
DE7060P dryer control panel
12
2