Fisher & Paykel OB76SDDEPX User manual

Keep this document handy for easy reference.
● For detailed information on the features of your oven, see your ‘User guide’.
● Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
● For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service &
warranty’ booklet.
YOUR OVEN
THE CONTROL PANEL
SETTING THE CLOCK
CONDITION BOTH OVENS
OB76SDDEPX
1Control panel
PER OVEN
2Oven vent louvres
3Oven light
4Telescopic sliding shelf (x3)
5Side rack
6Oven door and handle
7Oven seal
Accessories:
8Meat probe
9Flat baking tray
!0 Rack
!1 Grid
!2 Pan
8
9
10
11
12
2
3
4
5
7
6
1
Locking the control panel
● To lock, press and hold the
select button until the
control lock indicator comes
on.
● To unlock, press and hold the
cancel button until the
indicator flashes and then
goes out.
Control lock indicator
(see ‘Locking the control panel’)
if lit:
Control panel is locked
Timer indicator
(see ‘Using the timer’)
if lit:
Timer is
counting down
Close door indicator
if lit:
Door is open when oven is on
(some functions only). See
‘Troubleshooting’ in your User guide.
Cooking time indicator
(see ‘Automatic cooking’) in
User guide
if lit:
Automatic cooking time is set
Meat probe indicator
(see ‘Using the meat probe’) in
User guide
if lit:
Meat probe is in use
(display will alternate between
probe set temperature and internal
temperature of the meat)
Stop time indicator
(see ‘Automatic cooking’) in User
guide
if lit:
Automatic stop time is set
Display
Scroll Select Cancel
NZ AU
BUILT-IN OVEN
QUICK START GUIDE
You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock
setting. If you want to set the clock later, follow the steps under ‘To change the time’.
To change the time
(within the user preference menu)
When the oven is first switched on at the wall
1Press and hold the left and right
scroll buttons together
for 3 seconds to enter the user
preference menu.
● The display will either show 12 Hr
or 24 Hr
2Press the select button to
confirm. The display will flash.
3Follow steps 2-5 left to set the
time.
● At step 2a, you also now have the
ability to scroll between 24 Hr, 12
Hr and OFF (turns the display off).
● Refer to the User guide to learn
more about this feature.
3Press the left and right scroll
buttons to set the time.
1The display will flash 24 Hr.
4Press the select button to
confirm.
2Press the right scroll button to
scroll between 24 Hr and 12 Hr.
Press the select button to
confirm.
continued over
UPPER
LOWER
Fan
Bake
Fan
Forced
Classic
Bake
Fan
Grill
Maxi
Grill
Fan
Bake
Fan
Forced
Classic
Bake
Fan
Grill
Maxi
Grill
Upper Oven Function indicators
(see ‘Oven functions’)
Lower Oven Function indicators
(see ‘Oven functions’)
Function dial
Upper Oven
sealector button
Lower Oven
selector button
Upper oven
Temperature
indicator
Lower oven
Temperature
indicator
Temperature
dial
Function halo Temperature
halo
Upper oven
Lower oven
Upper Oven indicator if lit: Oven is on
Lower Oven indicator if lit: Oven is on
It is important that you condition the oven before using it for cooking and baking. Conditioning will burn off any manufacturing
residue and ensure you get the best results from the start. You can condition both ovens at the same time. Follow the steps below.
There will be a distinctive smell and a small amount of smoke during conditioning. This is normal, but make sure the kitchen is well
ventilated.
1Make sure you have removed any packaging and any cable ties used to secure the shelving during transit.
2Make sure you have set the clock.
3Make sure all the shelves are fitted.
UPPER
LOWER
NOITCNUF
NOITCNUF
ERUTAREPMET ERUTAREPMET
ERUTAREPMET ERUTAREPMET
5Select the Bake function.
● The halo will glow white.
● Each function has a
preset temperature and
so the oven will start
heating at the Bake preset
temperature of 180oC.
8Select the Bake function.
● The halo will glow white.
● Each function has a
preset temperature and
so the oven will start
heating at the Bake preset
temperature of 180oC.
4Press the UPPER oven
selector button
● The upper row of function
indicators will glow.
● The halo around the selector
button will glow red.
6Set the temperature to 200oC for 30 minutes.
● While the oven is heating up, the temperature
halo will glow red and the temperature indicator
will alternately show the actual and set
temperatures.
● When the oven has reached set temperature, a
tone will sound and the halo will turn white.
9Set the temperature to 200oC for 30 minutes.
● While the oven is heating up, the temperature
halo will glow red and the temperature indicator
will alternately show the actual and set
temperatures.
● When the oven has reached set temperature, a
tone will sound and the halo will turn white.
UPPER
LOWER
7Press the LOWER oven function button
● The lower row of function indicators will
glow
● The Bake indicator on the top row will
continue to glow red, but the rest of the
indicators will go out.

FOR MORE INFORMATION
For detailed information on the
features of your oven
For warranty information
If you…
● have any questions or comments
● need a Fisher & Paykel authorized
technician to service your product
● need replacement parts or accessories
● want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet
or contact us via our website:
www.fisherpaykel.com
590578 B 08.17
Placing the telescopic sliding shelves on the side racks provides EIGHT cooking
positions to choose from. Refer to the User guide for suggested shelf positions.
Note: generally, the shelf positions in the top of the oven are suitable for grilling.
Those in the middle or lower region of the oven are suitable for baking, roasting and casseroles.
● Always position oven shelves BEFORE heating the oven.
● To remove a sliding shelf, grip it by its two front corners (making sure you are gripping the wire shelf
and the sliding frame together), tilt upwards and pull it out of the oven.
● To place a sliding shelf in the oven correctly, position it so that the front bar is toward you, as shown.
● Check that the sliding frame is not extended.
● Check the guard rail (as shown) to make sure the shelf is the right way up.
● Position the shelf so that it is level and the rear shelf tags on both sides of the sliding frame rest on the
side racks (as shown).
● Then push the sliding shelf all the way to the back of the oven, until the front shelf tags drop into
place.
● For your safety, the wire shelves and telescopic sliding frames are built together as one unit and are
not separable. This means that when placed properly on the side racks, the slides will prevent the wire
shelves from tilting when pulled towards you.
● To prevent the tags from lifting off the side racks, take care to slide the shelves forward horizontally.
Shelf positions
1
2
3
4
5
6
7
8
REPOSITIONING THE SHELVES
USING THE TIMER
1Select the timer by pressing
the right scroll button once.
● The timer indicator will
appear and the colon will
flash.
2Press the select button to
confirm.
● The display will flash to
indicate the timer is ready to
be set.
3Set the time by pressing
the scroll buttons.
● Holding the buttons down
will speed up the scrolling.
4Press the select button
to confirm.
● The timer will then begin
to count down.
● If you want to check the
time of day, press the
cancel button once.
● Press the right scroll
button to scroll back to
the timer.
● You can use the timer at any time, even if you are not using the oven.
● If the time is more than an hour, the display will count down in minutes (hr:min).
If it is less than an hour, it will count down in seconds (min:sec).
● You can set the timer for up to 23 hours 59 minutes.
IMPORTANT!
The timer does NOT turn the oven off.
To modify the timer setting
1Make sure the display shows the remaining time counting down.
2Press the select button.
3Press the scroll buttons to set a new time.
4Press the select button to confirm.
To cancel the timer setting
1Make sure the display shows the remaining time counting down.
2Press the cancel button until the display shows the time of day and the timer indicator disappears.
When the set time is up
● The display will show 0:00 and a tone will sound every 15 seconds.
● Press any button to stop the tone sounding. The display will revert to showing the time of day.
Side rack
Side rack
Mounting
slots
Retaining wire
Lock
stud
Wire shelf
Front bar
Sliding frame
(push fully into place)
Shelf tag
Guard rail
NOITCNUF
Aero
Grill
UPPER
LOWER
NOITCNUF
NOITCNUF
Aero
Grill
UPPER
LOWER
!0 After 30 minutes is up, press the UPPER oven selector button.
● The lower indicators will go out except for the Bake function.
● The upper indicator lights will glow.
!1 Select Fan Grill. Leave the temperature at 200oC for 5 minutes.
!3 When you have finished, select each oven in turn using the
UPPER and LOWER oven selector buttons and turn the dial
function to Off. Both halos will go out
!4 Wipe out the ovens with a damp cloth and mild
detergent and thoroughly dry.
!2 Press the LOWER oven selector button.
Select Fan Grill. Leave the temperature at 200oC for 5
minutes.
CONDITION BOTH OVENS