Fisher & Paykel RF106RDWX1 Mounting instructions

Freestanding Wine Cabinets
RF106RDWX1, RF206RDWX1, RF306RDWX1
and RF356RDWX1 models
NZ AU GB IE EU AE IN
INSTALLATION INSTRUCTIONS
USER GUIDE

1
CONTENTS
Introduction 3
Safety and warnings 4
Installation instructions 8
Moving or storing your appliance 13
Operating instructions – External control panel 14
Operating instructions – Special functions 15
Interior and exterior features 16
Storing your wine 19
Loading your wine bottles 20
Cleaning care – Exterior 24
Cleaning care – Interior 25
User warnings and sounds 26
Troubleshooting 27
Manufacturer’s Warranty 29
Customer Care 31
European Directive 2012/19/EU on Waste Electrical 33
and Electronic Equipment (WEEE)
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this user guide may
not be available in all markets and are
subject to change at any time. For current
details about model and specification
availability in your country, please go to
our website www.fisherpaykel.com or
contact your local Fisher & Paykel dealer.
Note: the word “cabinet”, throughout this
user guide, refers to the combination of
upper and bottom zone products.
Registration
Register your product with us so we can
provide you with the best service possible.
To register your product visit our website:
www.fisherpaykel.com

3
INTRODUCTION
Thank you for buying a Fisher & Paykel Wine Cabinet to store your treasured wine,
you’ve made a great choice.
Having purchased our dual-zone cabinet you can rest assured that your red and white
wines are well cared for, over short term and long term periods.
Wine generally matures at a steady temperature between 11°Cto13°C, and for ready to
drink wines they are best served at their ideal drinking temperatures (see ‘Storing your
wine’ section). Temperature control is critical for the maturation of wines, as significant
daily or weekly temperature fluctuations can denature wines. If storage temperatures are
excessively high this can reduce the wines aromatic potential and can speed up maturation.
This can cause some wines to take on a ‘spoiled fruit’ flavouring. If storage temperatures
are excessively low, this can have the opposite effect and stunt a wines natural maturation
process. This can prevent a wines flavours from developing to their full potential.
Optimum humidity levels are also important for the storage of cork enclosed wines,
especially for long term storage. Dry surroundings can lead to dried out corks
encouraging wine evaporation, as well as oxygen permeation leading to oxidised and/or
spoiled wine. As for extremely humid conditions, there is a potential of damaging wine
labels and the growth of mould on bottles.
Light is known to be damaging to wines, particularly UV light as it creates hydrogen
sulphide compounds in wine affecting the tannins and the colour of wine. Therefore our
Wine Cabinets are designed to eliminate this threat by incorporating a UV-tempered
glass door, dark interiors and dimmed LED lighting.
Other golden rules of excellent wine storage that your Wine Cabinet offers is frequent
air circulation, as well as increased air circulation when large amounts of wine bottles
are added (Air-Cool function). Condensation eliminator (Demist function*) and minimal
vibrations with the low noise compressor.
RF206RDWX1 model RF306RDWX1 model RF356RDWX1 modelRF106RDWX1 model
*For RF306RDWX1 and RF356RDWX1 models.

4
SAFETY AND WARNINGS
!WARNING!
Electric Shock Hazard
Read and follow the safety and warnings
outlined in this user guide before operating
this appliance.
Failure to do so can result in death, electric
shock, fire or injury to persons.
R600a
This Wine Cabinet contains flammable
refrigerant isobutane (R600a).
Use this appliance only for the intended purpose as
described in the user guide.
IMPORTANT SAFETY INSTRUCTIONS:
WARNING!
When using this appliance always exercise basic
safety precautions including the following:
• This appliance is not intended for use by persons
(including children under the age of 8 years) with
reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instructions concerning
use of the appliance by a person responsible for
their safety.
• Young children should be supervised to ensure they
do not play with the appliance.

5
SAFETY AND WARNINGS
• Cleaning and user maintenance shall not be made by
children without supervision.
• Keep ventilation openings in the appliance enclosure
clear of obstruction.
• In case of damage to the refrigerant circuit, ventilate
the area by opening all windows. Do not operate
electrical equipment or any other equipment that
may produce arcs, sparks or flames in the area.
Contact your Fisher & Paykel Authorised Repairer
immediately to arrange for the appliance to be
repaired.
Food safety
• This appliance is intended to be used exclusively for
the storage of wine.
• Do not store food and milk products in the Wine
Cabinet. The interior temperature may not be cool
enough to prevent spoilage in food, and the expiry
dates stated on the food packaging may be invalid.
Electrical safety
• This appliance must be installed in accordance with
the installation instructions before use.
• Always grip the plug firmly and pull straight out
from the outlet.
• Do not plug in any other appliance at the same
power point as your Wine Cabinet.
• Repair or replace immediately all electric service
cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or
abrasion along its length, or at either the plug or
appliance end.

6
SAFETY AND WARNINGS
• If the power supply cord is damaged, it must only
be replaced by your Fisher & Paykel Authorised
Repairer.
• When moving your appliance, be careful not to roll
over or damage the power cord.
• Do not use electrical appliances inside the
WineCabinet.
IMPORTANT!
Your Wine Cabinet is designed to operate without
the need for regular service checks. However, if your
Wine Cabinet is malfunctioning, have it attended to
by your Fisher & Paykel Authorised Repairer as soon
as possible.
Cleaning
• Many commercially available cleaning products
contain solvents which may attack plastic
components of your Wine Cabinet and cause them
to crack. Please refer to the ‘Cleaning care’ section
of this user guide for further advice.
Disposal and recycle
• Extreme care must be taken when disposing your old
appliance to avoid hazards:
– The flammable refrigerant gas must be safely
removed.
– The thermal insulation foam contained in this
appliance is produced by flammable blowing
gases, any exposed foam may be highly flammable
and must be carefully treated during disposal.
– The doors should be removed, if possible and
the shelves left in place so that children may not
easily climb inside.

7
SAFETY AND WARNINGS
• Your Fisher & Paykel Authorised Repairer will be able
to give advice on environmentally friendly methods
of disposing your old Wine Cabinet.
• It is hazardous for anyone other than an authorised
repairer to service this appliance. In Queensland,
Australia the authorised service person must hold a
gas work licence or authorisation for hydrocarbon
refrigerants to carry out service or repairs which
involve removal of covers.
Storing wine
• DO NOT store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
• Never store volatile or flammable materials in your
Wine Cabinet as they may explode.
Power failure
• In the event of a power interruption, the Wine
Cabinet will automatically save the current
temperature settings. When power is recovered, the
Wine Cabinet will revert to the current temperature
settings only.
• Most power failures are corrected within a short
period of time. 1–2hours loss of power will not
affect the Wine Cabinet’s temperatures.
• To avoid sudden change of temperature while the
power is off, you should avoid opening the door.
For longer periods of power failure, do take steps
toprotect your wine.

8
INSTALLATION INSTRUCTIONS
Please follow the installation steps below to ensure your appliance operates correctly.
Power
 The appliance must be installed so the plug is accessible.
 To ensure that the appliance is not accidentally switched off, connect your Wine Cabinet
to its own power point. Do not plug in any other appliance at this power point.
 For power requirements, please refer to the serial plate located on the rear of the
cabinet.
 It is essential that the appliance is properly grounded (earthed).
 Connect the appliance to the electrical supply (220V–240V50Hz) with the fitted
plug and lead.
 Connections to the mains supply should be in accordance with local regulations.
Location
 Your Wine Cabinet should not be located in direct sunlight or next to any heat
generating appliance such as a cooktop, oven or dishwasher.
 The appliance should not be located in garages or on carpeted floors.
 This appliance is intended to be used in indoor ambient temperatures between 16°C
and 25°C. Do not operate this appliance outside the specified ambient ranges as
performance may be compromised.
 This appliance is intended to be used in household and similar applications such as:
– Staff kitchen areas in shops, offices, and other working environments;
– Domestic farm houses and by clients in hotels, motels and other residential type
environments;
– Domestic bed and breakfast type environments;
– Domestic catering and similar non-retail/non-commercial applications.
Ventilation and installation
To ensure adequate ventilation for your Wine Cabinet remove external protective
packaging film, and see recommended ‘Product and cabinetry dimensions’.

9
INSTALLATION INSTRUCTIONS
Product installation
 Your Wine Cabinet is fitted with rear rollers designed for moving the product in the
forwards and backwards direction.
 Avoid moving the product in a sideways direction as this may damage the floor
covering/surface.
 Your Wine Cabinet will arrive with the front feet raised making moving the product into
its final location a simple task.
 Move the Wine Cabinet into its final position making sure there is correct clearances
between the product and surrounding cabinetry.
Aligning your Wine Cabinet with cabinetry
 Align the sides of the product with the cabinetry by adjusting the hinge side front foot.
 Adjust the handle side foot until it touches the floor and takes a small amount of weight.
 Once the product is in place and aligned with cupboards/alcove gently push on the
front top and check if the product is rocking or stable.
Levelling your Wine Cabinet
 It is important that all four corners of
the Wine Cabinet base are supported
firmly on the floor to eliminate any
cabinet movement.
 Installing the appliance on a soft or
uneven/unlevelled floor may result
in twisting of the cabinet and poor
sealing of the door.
 The cabinet has adjustable feet, which
can be used to level the product.
Remove the feet cover, turn the feet
clockwise to raise the appliance
or counter-clockwise to lower the
appliance, until it is stable. This will
ensure a good door closing action.
Replace the feet cover.
 The front levelling foot on the hinge
side should take majority of the
cabinet’s weight and be stable, ie the
cabinet should not rock or wobble.
To remove, pull the feet
cover towards you
Counter-clockwise
to raise feet
Clockwise to
lower feet

10
INSTALLATION INSTRUCTIONS
T
Power plug to
power wall socket
A
B
CO
QQ
P
D
E
K L
o
F
R
G
K M
o
H
S
I
K N
o
J
Flush with Wine Cabinet chassis
– full door rotation
Flush with Wine Cabinet door
– full door rotation
Flush with Wine Cabinet door
– 90° door rotation
Product and cabinetry dimensions
A
B C O
QQ
P
D
E
K L
o
F
R
G
K M
o
H
S
I
K N
o
J
A
B C O
QQ
P
D
E
K L
o
F
R
G
K M
o
H
S
I
K N
o
J
A
B C O
QQ
P
D
E
K L
o
F
R
G
K M
o
H
S
I
K N
o
J
A
B
CO
QQ
P
D
E
K L
o
F
R
G
K M
o
H
S
I
K N
o
J

11
INSTALLATION INSTRUCTIONS
RF106RDWX1
RF206RDWX1
RF306RDWX1
RF356RDWX1
PRODUCT DIMENSIONS mm
AOverall height of product 825 1270 1660 1855
BOverall width of product 595 595 595 595
COverall depth of product
(excludes handle, includes back cover)
639 639 639 639
CABINETRY DIMENSIONS
(Including minimum air clearances)
mm
DInside height of cavity 875 1320 1710 1905
Flush with Wine Cabinet chassis – full door rotation
EInside width 635 635 635 635
FInside depth 612 612 612 612
Flush with Wine Cabinet door – full door rotation
GInside width 635 635 635 635
HInside depth flush to flat door 669 669 669 669
Flush with Wine Cabinet door – 90° door rotation
(for full shelf access, the door needs to be open past 90°)
IInside width 715 715 715 715
JInside depth flush to flat door 669 669 669 669
MINIMUM CLEARANCES mm
KSide clearance 20 20 20 20
LSide clearance – hinge side flush
with chassis – full rotation
20 20 20 20
MSide clearance – hinge side flush
with door – full rotation
20 20 20 20
NSide clearance – hinge side flush
with door – 90°rotation
100 100 100 100
ORear clearance (includes back cover) 30 30 30 30
PTop clearance – above Wine Cabinet 50 50 50 50
QVent – around top of cupboard (optional) 50 50 50 50
RDoor clearance – hinge side flush
with chassis – full rotation
225 225 225 225
SDoor clearance – hinge side flush
with door – full rotation
225 225 225 225
MINIMUM POWER PLUG DIMENSIONS mm
TPower plug depth 30 30 30 30

12
INSTALLATION INSTRUCTIONS
What to do if your Wine Cabinet is unstable
1Gently push the Wine Cabinet back until the
rear contacts the floor.
 Measure the gap under the front foot, which
has come off the floor.
 Obtain some solid packing material
(hardwood, plastic, etc) which fits firmly
into the gap under the foot.
IMPORTANT!
Do not use metallic materials that may
corrode, stain and/or damage floor coverings.
2Wind both front feet up and ease the cabinet
out of position.
 Place the packing material in the location
diagonally opposite the front foot that lifts
off the floor.
 Make sure the packing material stays in
place when the product is pushed back
intoposition.
 Ideally, the packing material is large enough
to rest against the back wall to prevent it
from moving when the cabinet is pushed
back into position.
3Push the Wine Cabinet back into position and
adjust the front feet. Check alignment and
door closing action are satisfactory.
 Make small adjustments to the front feet
where necessary, and ensure the product
is stable.
Before placing wine in your Wine Cabinet
 Remove all internal packaging.
 Clean the inside of the appliance to remove manufacturing and transportation dust.
Please refer to the ‘Cleaning care’ section of this user guide for further advice.
 Allow the Wine Cabinet to run empty for 1–2hours, this allows the appliance to
acclimatize and remove any residual odours before making temperature adjustments.
 Ensure your Wine Cabinet has adequate ventilation.
 Do not cover you appliance with any material that will prevent air from flowing around
the cabinet sides.
This foot lifts off the floor when
top front is gently pushed back
Unlevel floor
Packing material goes under rear foot
diagonally opposite front foot that lifts
For example: if this foot lifts off
the floor when pushing gently on
the top front of the Wine Cabinet
Wall behind Wine Cabinet

13
MOVING OR STORING YOUR APPLIANCE
If your Wine Cabinet is turned off for any reason, wait 10minutes before turning it back
on. This will allow the refrigeration systems pressures to equalise before restarting.
Moving your appliance
 Turn off the appliance and unplug from the power point. Remove all wine bottles.
 Turn the adjustable feet counter-clockwise to lower the product, making sure the feet
are wound up into the product.
 Ease the appliance out of its position. Tape the power cord to the back of the Wine
Cabinet, tape the shelves in place and tape the door closed.
 Always move the appliance vertically. Do not transport the product lying down, this
potentially damages the sealed cooling system.
 Relocate and install the appliance. Wait 30minutes before plugging in and switching on
the cabinet.
Storing your Wine Cabinet
 When storing your cleaned appliance, leave the door open. This allows air to circulate
and prevents the build-up of bacteria and moulds.
 Before using again, clean well using liquid dishwashing detergent dissolved in warm
water. Rinse with clean water and dry with a lint-free cloth.
Holiday time
We recommend you leave your Wine Cabinet operating while you are on holiday.

14
OPERATING INSTRUCTIONS – EXTERNAL CONTROL PANEL
The control panel enables you to view and modify all the features and options on your
Wine Cabinet.
Temperature control
 When the Wine Cabinet is turned on for the first time, the control panel will display the
actual temperature of the cabinet.
 The system will automatically cool both zones to their default temperature setting of
12°C (ideal for long term storage). This will take between 1 – 2 hours.
 The temperature zones are independently controlled and do not change with the
temperature or humidity of the surrounding; whether summer or winter.
 The Wine Cabinet can be set to any temperature between 5°C and 20°C in each zone to
accommodate your wine storage requirements.
 If you wish to alter the temperature of either zone, this can be easily done by using the
external control panel.
External control panel
RF106RDWX1 and RF206RDWX1 models
RF306RDWX1 and RF356RDWX1 models
Adjusting the temperature of each zone
1The zone last selected will automatically be illuminated.
2Press and hold the ‘Keylock’ button for 3seconds to unlock the external control panel.
When unlocked the back lit LED lights intensify.
3To change zones press the ‘Zone’ button once.
4The temperature may be altered by pressing the or buttons. One press on either of
these buttons will increase or reduce the temperature by one °C or °F.
When the desired temperature is displayed, wait 3seconds, the blinking will stop and
the temperature will be set.
5To switch between temperature units of °C and °F, press the ‘Air-Cool’ button for
3seconds.

15
OPERATING INSTRUCTIONS – SPECIAL FUNCTIONS
Special functions
Keylock
The external control panel automatically locks from any key presses after 30seconds
from being enabled.
1To deactivate Keylock and allow key presses. Press the ‘Keylock’ button for 3seconds,
when unlocked the back lit LED lights intensify.
2
To activate Keylock press the ‘Keylock’ button for 3seconds, when locked the back lit
LED lights will dim.
LED lighting
When the Wine Cabinet door is opened the light automatically illuminates both zones.
When the door is closed the light will automatically turn off. For maximum energy
savings, it is recommended to leave the light off when not viewing your collection.
To keep the light illuminated at all times (on door opening or closing):
1Press the ‘Light’ button once and the icon will illuminate.
2To deactivate the light from illuminating when not viewing your collection, press the
‘Light’ button once. The icon will no longer illuminate.
Air-Cool
The interior fans provide a constant and evenly distributed air flow throughout
the cabinet, ensuring the optimum environment for wine storage. This function is
recommended when large amounts of wine bottles are added at any one time.
1To activate press the ‘Air-Cool’ button once and the icon will illuminate.
2To deactivate press the ‘Air-Cool’ button once. The icon will illuminate.
Demist (For RF306RDWX1 and RF356RDWX1 models)
In high temperature conditions the surface of the Wine Cabinet door may show signs of
condensation. To eliminate this, the ‘Demist’ function is recommended.
1To activate press the ‘Demist’ button once and the icon will illuminate.
2To deactivate, press the ‘Demist’ button once and the icon will no longer illuminate.
Door alarm
A continuous alarm will sound if the cabinet door has been left open for longer than
60seconds. The alarm will stop only when the door is closed.
– For times when you require the door to be opened longer than normal eg rotating
your wine bottles or loading more wine, the door alarm can be temporarily muted.
1To mute the door alarm, press any button on the external control panel once. When the
cabinet door is closed, alarm mute will deactivate and the door alarm will revert to normal.
IMPORTANT!
When the cabinet door is left open for long periods of time wine quality may be
compromised.
Automatic defrosting
 This model has been designed to maintain the relative humidity inside the Wine Cabinet
alongside the automatic defrosting cycle.
 Water captured in the reservoir tray from a defrost cycle assists in maintaining the
humidity. Humidity levels may be further assisted by adding water to the reservoir trays
and activating the ‘Air-Cool’ function.

16
INTERIOR AND EXTERIOR FEATURES
Upper zone
Presentation shelf
Bottom zone
Double Tier shelf
Bottom zone
Single Tier shelf
Door Switch
RF206RDWX1 model
UV-tempered
glassdoor
Upper zone
carbon filter
Fixed shelf
Fixed shelf
Safety lock
Door Switch
RF106RDWX1 model
UV-tempered
glassdoor
Bottom zone
Single Tier shelf
Upper zone
Standard shelf
Fixed shelf
Fixed shelf
Safety lock

17
INTERIOR AND EXTERIOR FEATURES
Interior features
Shelving
The oak shelves have been designed to allow for even air distribution around your wine
bottles. Depending on your model there are a range of adjustable shelves that can be
rearranged to suit your storage needs.
Standard shelf (all models)
These shelves are located in both zones and is designed to hold up to 22Bordeaux
bottles depending on the support lugs selected. The ideal loading arrangement for
these shelves is to have bottle necks interlocking.
Presentation shelf (excludes RF106RDWX1 model)
These shelves are located in the upper zone only
and is designed to hold up to 5 Bordeaux bottles
or to store opened bottles when in the tilted
state. When not using the Presentation shelf a
total of 9Bordeaux bottles can be stored in the
upright position.
To tilt the Presentation shelf:
1
Hold the front and back edge of the shelf
firmly and lift vertically to dislodge from the
support lugs.
2Pull the shelf slightly forward and tilt the front
edge of the shelf down to the next support lugs.
3Push the shelf back into the Wine Cabinet until
you feel it secure into the support lugs.
Double Tier shelf (excludes RF106RDWX1 model)
These shelves are located in the bottom zone only and is designed to hold up to
11Bordeaux bottles. The ideal loading arrangement for these shelves is to have bottle
necks facing the back of the Wine Cabinet.
Single Tier shelf (all models)
These shelves are located in the bottom support lugs of the bottom zone only and is
designed to hold 6Bordeaux bottles at any one time.
If removing this shelf please take care of the wine bottles stored underneath (when not
storing Bordeaux bottles), as bottles can be easily dislodged.
1
2
3
1
2
3

18
INTERIOR AND EXTERIOR FEATURES
Activated carbon filters (all models)
Air quality is critical for preserving
wine, the activated carbon filters helps
to remove stale, unwanted odours and
replenishes with fresh air.
 The filters are fitted to the rear wall on
the right-hand side of the upper and
bottom zone.
 We recommend that you replace your
activated carbon filters once every five
years. Replacement filters are available
from your Fisher & Paykel Authorised
Repairer.
1To remove the filter hold by the handle,
and turn counter-clockwise until fully
loosened. Pull towards you to remove.
2To replace the filter hold by the handle,
insert and turn clockwise to fully secure.
Exterior features
Door lock (all models)
The Wine cabinet is equipped with a
door lock located at the bottom left of
the cabinet door.
 To lock the cabinet, insert the key and
turn 90° counter-clockwise.
 To unlock the cabinet, insert the key and
turn 90° clockwise
12
90° counter-clockwise
to lock
90° clockwise
to unlock