FLOS Jasper Morrison MINI GLO-BALL T User manual

REV. 1
DATE 24/06/2021
1
MINI GLO-BALL T
Designed by Jasper Morrison, 2003
F4191009
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF4190400
–New version Mini Glo-ball diffuser assembly
02. RF04725
–White electrical wiring with on/off switch
REV. 1
DATE 24/06/2021
MINI GLO-BALL T
F4191009

EN
REV. 1
DATE 24/06/2021
3
RF4190400
MINI GLO-BALL DIFFUSER ASSEMBLY
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
MINI GLO-BALL T F4191009
Ø 28
mm
Mini Glo-
ball C/W
p.03
Mini Glo-
ball T
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Fasten the diffuser (A) to the lamp body (B).
EN
Fig.1
REV. 1
DATE 24/06/2021
RF4190400
MINI GLO-BALL DIFFUSER ASSEMBLY
MINI GLO-BALL T F4191009
A
B

EN
5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Turn upside down the lamp body and remove
delicately without tearing the label (A) from
the base (do not throw away).
A
Fig.1
Fig.2
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
C
B
Unfasten the three screws (B) present on the
base.
Remove the base (C) from the assembly.
Fig.3
Fig.4
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Turn the lamp body.
Unfasten the lamp holder fixing screws (D)
and free the lamp holder (E) from the
assembly.
Fig.5
Fig.6
D
E
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Disconnect the electrical wires (G) from the
lamp holder by pressing the push terminals
with a paper clip (F).
G
Fig.8
Fig.7
F
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
H
I
Fig.9
Fig.10
Slide-off the damaged electrical cable
assembly (H) from the lamp body (I).
Assemble now the new spare-part:
Insert the electrical assembly (H) through the
lamp body (I) hole.
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009

11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.12
Fig.11
J
REV. 1
DATE 24/06/2021
RF04725
WHITE ELECTRICAL WIRING WITH ON/OFF SWICTH
MINI GLO-BALL T F4191009
Connect the electrical wires (J) to the lamp
holder terminals.
Connect the Brown “L” (live) wire in the
terminal that corresponds to the letter “L”
present on the lamp holder and then connect
the Blue “N” (neutral) wire in the terminal
“N”.
N.B The electrical wires are connected by
pushing the wires inside the terminals,
therefore it is necessary to verify that they are
connected properly.
Turn the lamp body.
Lock the lamp holder (E) (Fig.6 page 8) to the
lamp body by fastening the lamp holder fixing
screws (D).(Fig.5 page 8).
Turn upside down the lamp body (I) and
locate the base (C) on top.
N.B. The three holes present on the base (C)
need to correspond with the three holes
present on the lamp body (I).
The electrical cable (K) must come-out in
correspondence of the lateral opening gap
(L).
Glue the lamp label (A) (Fig.2 page 6) back-on
the base.
L
K
C
I