FLOS F1530059 User manual

REV. 1
DATE 26/07/2021
1
CAPTAIN FLINT
Designed by Michael Anastassiades, 2015
F1530059
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. F1532009 – White marble base
02. RF3320400 –48V Power supply unit with plug kit
03. RF26382 –Switch dimmer 400mA
04. RF1530100 –Screws with Allen key and feet pads
CAPTAIN FLINT
F1530059
REV. 1
DATE 26/07/2021

EN
3
F1532009
WHITE MARBLE BASE
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the cable (E) into the hole of the base (F) and place the upper
flange (D) inserting the plug into the slot (H). Fix the lower flange (C)
through the screws (A) paying attention to insert the cable (E) into the split
(I) which must be placed oppose the plug (G).
EN
Fig.1
E
E
F1532009
WHITE MARBLE BASE
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021
F
A
G
D
H
C
I

EN
5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF3320400
POWER SUPPLY UNIT WITH PLUG KIT
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021
Captain
Flint
p.05
Noctambule
F
p.15
Sawaru
p.03
Superloon
p.13
Taccia
Led
p.13
Arco Led
p.03

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the plug into the power unit. By using the guides, snap the plug
inside its apposite slot (use the correct type of plug for the country in
which the device must be installed).
EN
Fig.1
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021
RF3320400
POWER SUPPLY UNIT WITH PLUG KIT

EN
7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF26382
SWITCH DIMMER 400mA
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Connect the plug (P) to the push button switch (Q) locking it by turning it
90º clockwise.
EN
Fig.1
RF26382
SWITCH DIMMER 400mA
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021
E
Q

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Connect the plug (C) to the power unit (B) locking it in by rotating it 90°
clockwise.
EN
Fig.2
RF26382
SWITCH DIMMER 400mA
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021
E
Q

EN
10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF1530100
SCREWS WITH ALLEN KEY AND FEET PADS
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021

EN
11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF1530100
SCREWS WITH ALLEN KEY AND FEET PADS
CAPTAIN FLINT F1530059
REV. 1
DATE 26/07/2021
A
Glue the feet pads (A) to the base.
Insert the cable (E) into the hole of the base (F) and
place the upper flange (D) inserting the plug into
the slot (H). Fix the lower flange (C) through the
screws (A) paying attention to insert the cable (E)
into the split (I) which must be placed oppose the
plug (G).
Fig.1
Fig.2
E
E
F
A
G
D
H
C
I