FLOS F0310000 User manual

EN
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
F0310000
MARBLE BASE
REV. 1
DATE 10/06/2021
Arco LedArco

1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
C
G
E
AFig.1
REV. 1
DATE 10/06/2021
F0310000
MARBLE BASE
B
F
D
Position the channel (A) in the housing (B); insert the joint (C) into the hole in the
base (D); fix the channel (A) to the base (D) with the screw (E) being careful not
to tear/mark the cable with the head of the screw.
ARCO F0300000

2
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Insert the plug cable (A) through the channel (B) until the connector (C) comes
out from the upper part of the channel, as shown in the image. Place the
channel (B) in the housing (D), insert the joint (E) into the hole in the base (F), fix
the channel (B) to the base (F) with the screw (G) being careful to not damage
the cable with the head of the screw.
C
G
E
AFig.1
REV. 1
DATE 31/05/2021
F0310000
MARBLE BASE
ARCO LED F0303000
B
F
D