Floyd Chaise User manual

Chaise

Components
Chaise Legs
Knobs
4×
12×
2×
1×
1×
Connector Plates
Chaise Panel
Chaise Cushion
A

1
Begin by attaching the four legs
to the bottom of the chaise panel
with the knobs (We recommend
doing this on a rug or the
packaging it came in to protect
the surface of the panel).
When all four legs are attached,
flip over the chaise panel.
Assemble
the chaise

2
Place the chaise panel on the
side of the sofa where you want
to attach it (it can go on either
the left or right side, and you can
always switch it later!)
Take the two chaise connector
plates and attach them to the
bottom of chaise panel with two
knobs.
The side of the plate with the
longer slotted hole should attach
to the bottom of the main sofa
seat panel. Use the last two knobs
to fasten the chaise connector
plates to the main seat panel.
Attach
the chaise

3
On the side where the chaise
is attached, replace the seat
cushion with the long chaise
cushion.
Note: The chaise cushion should
be placed so that the zipper pull
is at the front of the sofa.
That’s it – you’re done!
@floyddetroit
#thefloydsofa
All done!