Floyd Acton Slat Bench User manual

The Acton Slat Bench
How to Assemble:

1x Slatted Top
8x Fittings 1x Hex Tool
4x Legs
Components
Pro Tip: If you’re considering a return, save your packaging!

Step: 1 of 7
Screw the Fittings into the thread holes
at the top of the Legs.
Use the provided Hex Tool to fully tighten
the Fittings to the Legs. Repeat the process
with the remaining Legs.
Assembly Instructions The Acton Bench

Step: 2 of 7
Remove the Slatted Top from the packaging
and place on a rug or other non-abrasive
surface with the screws facing up.
Assembly Instructions The Acton Bench

Step: 3 of 7
Using the Hex Tool, loosen the pre-installed
screws by turning them counterclockwise
(4x). Do not fully remove the screws.
Assembly Instructions The Acton Bench

Step: 4 of 7
Insert the Leg Fittings into the two
corresponding holes in the side of the
slat until the Leg is flush with the
Slatted Top.
Secure the Legs to the Slatted Top by
tightening the screws.
Assembly Instructions The Acton Bench

Step: 5 of 7
One at a time, repeat step 4 to attach the
remaining 3 Legs.
Assembly Instructions The Acton Bench

Step: 6 of 7
Double check that all the screws are
tightened and all four Legs are firmly
in place.
Assembly Instructions The Acton Bench

Step: 7 of 7
You’re all set! Carefully flip the bench
upright.
Note: If necessary, further tighten screws.
Assembly Instructions The Acton Bench

READ ALL INSTRUCTIONS BEFORE ASSEMBLY &
USE. ADULT ASSEMBLY REQUIRED. KEEP SMALL
PARTS AND PACKAGING AWAY FROM CHILDREN
NOTES ON USE:
Keep children and others safe by following these
simple rules:
Do not allow any child to play on furniture
Do not allow climbing on any piece of furniture
Do not allow hanging from any piece of furniture
Assembly:
Use caution when assembling. Do not change the
specifications or modify this product. Incorrect
assembly can cause product to fail and cause
damage or personal injury. Double check that
product is assembled correctly and all components
are properly tightened before use. Periodically
re-tighten hardware.
Usage:
Remove all packaging before first use.
Only meant for indoor use.
Cleaning/Care:
Clean with a dry or damp lint free cloth.
Assembly Instructions The Acton Bench