Floyd The Bedside Table User manual

The Bedside Table Repair Kit

Repair Kit: The Bedside Table
Components 6x Black Screws
1x Shipping Box
You’ll also need:
(For Black Tables) 6x Silver Screws (For White Tables)
1x Phillips Head Screwdriver
(Not included)
*Don’t discard!

Repair Kit: The Bedside Table
Begin by placing your Bedside
Table upside down on a soft,
clean surface like a rug.
Then, insert the Shipping Box
into the open space—this will
act as a temporary support for
your shelf.
Lastly, slide the shelf into place.
Step 1
01.
02.

Repair Kit: The Bedside Table
Make sure all 6 pre-existing
holes are aligned and select the
appropriately colored screws for
your Bedside Table.
Screw in the replacement screws.
Start with one of the frontmost
screws and follow that with one of
the backmost screws. From there,
you can install them in any order.
Be sure to push the wood shelf up
against the metal frame as tightly
as possible when installing screws.
Step 2
NOTE: The replacement screws are intentionally tight!
01.
02.
03.

Repair Kit: The Bedside Table
Your repair is complete!
Check to ensure all screws are
tight, but do not over-tighten.
Once all the screws are in place,
slide the shipping box out and
install the Bedside Table per the
original instructions.
Step 3