Fluke Calibration TL2X4W-PTII User manual

TL2X4W-PTII
2x4-Wire Ohms Test Leads
Instruction Sheet
Introduction
The Fluke TL2X4W-PTII 2x4-Wire 1000 V Test Leads are
designed for use with the 8845A and 8846A multimeters. The
split contacts of the test lead’s banana plugs are aligned to mate
with the split contacts of the 8845A and 8846A HI and LO input
connectors.
The split contact design used by both the meters and the test
leads bring both the input and sense terminals of the meters to
any 4-wire resistance measurement with only two, instead of four
test leads.
PN 2826226
January 2007, Rev.1, 9/19
2007-2019 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.

TL2X4W-PTII English Instruction Sheet
Page 2
Safety Information
XW Warning
To avoid possible electric shock or personal injury:
•Do not use test leads directly connected to a
mains supply.
•Do not use the test leads for measurements
within Measurement Categories II, III, and IV.
•Use the test leads only as specified by Fluke, or
the protection provided may be impaired.
•Do not use the test leads if they are cracked or
have exposed metal.
•Do not exceed the test lead’s voltage and
current rating.
•Make sure test leads are fully mated to the
instrument and accessories.
•Keep fingers behind the finger guards.
•Adhere to local and national safety codes.
•Individual protective equipment must be used
to prevent shock and injury.

TL2X4W-PTII English Instruction Sheet
Page 3
International Symbols
Symbol Meaning
~�
This product complies with the WEEE Directive
marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product
in domestic household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category
9 "Monitoring and Control Instrumentation" product.
Do not dispose of this product as unsorted municipal
waste.
X�
WARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
W� WARNING - RISK OF DANGER. Consult user
documentation.
)� Certified by CSA Group to North American safety
standards.
P� Conforms to European Union directives
T� Double insulated
Cleaning
Clean the leads with a soft cloth, mild soap, and water. To avoid
damage, do not use abrasives or solvents to clean the leads.
Specifications
Maximum Voltage between test lead and ground: 1000 V
Temperature
Operating: 0 to 55 ºC <90 % relative humidity
Storage: -40 to +70 ºC
Altitude: 2000 m
Safety: IEC 61010-031: 1000 V, 0.5 A, Pollution Degree 2

TL2X4W-PTII English Instruction Sheet
Page 4
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: [phone]
Japan: [phone]
Singapore: [phone]
China: [phone]
Brazil: [phone]
Anywhere in the world: [phone]
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
Address correspondence to:
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090, P.O. Box 1186,
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A. The Netherlands