Fluke FiberInspector Pro OFTM-5352 User manual

OFTM-5352 English Instruction Sheet
05/11/04
Dimensions: 5.5” x 8.25”
Page 1
PN 2114390 May 2004
© 2004 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
OFTM-5352
FiberInspector

Pro Video Probe
Instruction Sheet
The OFTM-5352 FiberInspector Pro video probe connects to an OF-500 OptiFiber
tester to let you inspect the ends of fiber optic connectors. The probe’s 250X and
400X magnifications reveal dirt, scratches, and other defects that can cause poor
performance or failures in fiber optic networks.
A FiberInspector Pro video probe comes with the following:
•FT650 fiber probe
•Probe adapter tips (ST, SC, FC, and universal 2.5 mm patch cord tip)
•Adapter cable for the OF-500 OptiFiber camera connector
•Instruction sheet
Registration
Registering your product with Fluke Networks gives you access to valuable
information on product updates, troubleshooting tips, and other support services.
To register, fill out the online registration form on the Fluke Networks website at
www.flukenetworks.com/registration.

OFTM-5352 English Instruction Sheet
05/11/04
Dimensions: 5.5” x 8.25”
Page 2
Safety Information
WWarning
To avoid possible eye damage caused by hazardous radiation, never look
directly into optical output connectors. Some sources produce invisible
radiation that can permanently damage your eyes.
To avoid possible fire, electric shock, or personal injury, do not open the
case; no user-serviceable parts are inside.
Verifying that the FiberInspector Option is Enabled
Before you use a FiberInspector probe purchased separately from the OptiFiber
tester, verify that the FiberInspector option is enabled on your tester.
To verify that the option is enabled, press Fon the tester; then select Enable
OptiFiber Options. If the FiberInspector option is not shown as “INSTALLED” contact
Fluke Networks for assistance.
Using the Probe
Figure 1 shows how to use the probe.
Caution
Some adapter tips have small screws that slide into a slot on the probe
end. Do not adjust this screw.
See the tester’s online help or the OF-500 OptiFiber Technical Reference Handbook
on the OptiFiber Product Manuals CD for details on FiberInspector functions.

OFTM-5352 English Instruction Sheet
05/11/04
Dimensions: 5.5” x 8.25”
Page 3
A
B
O PTI F IBER
F2 F3 F4 F5
F1
HELP
VIEW
RECORDS
FIBER
INSPECTOR
SETUP
TEST
ENTER
EXIT
FUNCTIONS
DF
SAVE
E
C
Adapter tip
(match connector
to be inspected)
Focus
control
Magnification
control
avr01.eps
AUse the adapter cable provided to connect the probe to the video input jack
on the side of the tester.
BScrew an adapter tip that matches the connector type being inspected onto
the fiber probe.
CClean the connector to be inspected.
DPress f. If the tester shows the message “Camera Image Unavailable”
check the connections between the probe and the tester.
EPlace the probe on the fiber connector. Turn the larger ring on the probe to
focus the image. Turn the smaller ring to change magnification.
The tester’s softkeys provide additional functions. Press Hfor additional
information about using the probe.
FTo save the image, press s, select or create a fiber ID; then press s
again.
Figure 1. Using the Probe

OFTM-5352 English Instruction Sheet
05/11/04
Dimensions: 5.5” x 8.25”
Page 4
Maintenance
Clean the case with a soft cloth dampened with water or a mild detergent. Do not
use solvents or abrasive cleansers.
Getting Service
Contact Fluke Networks for information on authorized Fluke Networks service
centers.
Accessories
The following accessories are available from Fluke Networks for the OFTM-5352
FiberInspector Pro video probe. Other styles of adapter tips may be available. Visit
the Fluke Networks website for a complete list of fiber test accessories.
Description Fluke Networks Model Number
Fiber optic cleaning kit NF430
MT-RJ adapter tip NF360
LC adapter tip NF362
MU adapter tip NF364
Contacting Fluke Networks
www.flukenetworks.com
[e-mail]
[phone]
•Australia: 61 (2) 8850-3333 or 61 (3) 9329-0244
•Beijing: 86 (10) 6512-3435
•Brazil: 11 3044 1277
•Canada: 1-800-363-5853
•Europe: [phone]
•Hong Kong: 852 2721-3228
•Japan: [phone]
•Korea: 82 2 539-6311
•Singapore: [phone]
•Taiwan: (886) 2-227-83199
•USA: 1-800-283-5853
Visit our website for a complete list of phone numbers.

OFTM-5352 English Instruction Sheet
05/11/04
Dimensions: 5.5” x 8.25”
Page 5
Specifications
Magnification 250X and 400X
Camera type 0.33 in (8.38 mm) CCD with adjustable focus
Light source LED
Connection to OptiFiber
tester 8-pin mini DIN to NTSC video port
Power source Powered by the OF-500 OptiFiber tester
Lighting technique Coaxial
Dimensions 1.8 in x 1.7 in x 5.5 in
(45.7 mm x 43.2 mm x 140 mm)
(length depends on adapter tip)
Weight 0.4 lb (180 g)
Temperature range Operating: 32 °F to 104 °F (0 °C to 40 °C)
Storage: -14 °F to +140 °F (-10 °C to +60 °C)
Humidity range Operating: 0 % to 45 % RH non-condensing
Storage: 0 % to 95 % RH non-condensing
Certifications P(when used with the OF-500
OptiFiber tester)

OFTM-5352 English Instruction Sheet
05/11/04
Dimensions: 5.5” x 8.25”
Page 6
LIMITED WARRANTY & LIMITATION OF LIABILITY
Fluke Networks products will be free from defects in material and workmanship for
one year from the date of purchase. Parts, accessories, product repairs and services
are warranted for 90 days. This warranty does not cover disposable batteries, cable
connector tabs, cable insulation-displacement connectors, or damage from accident,
neglect, misuse, alteration, contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other warranty on Fluke
Networks’ behalf. To obtain service during the warranty period, contact your
nearest Fluke Networks authorized service center to obtain return authorization
information, then send your defective product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE
NETWORKS IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.
Since some states or countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this limitation of liability may
not apply to you.
6/01
Fluke Networks
PO Box 777
Everett, WA 98206-0777
USA