Flying Industry Development S1XB-DC06-ANT2 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
12 xReceiver: S1XB-DC06-ANT2/ S1XB-DC09-ANT2/S1XB-DC12-ANT2/S1XB-DC24-ANT2(1 Channel/ Three ControlModes)
1xTransmitter: CB-12
1xUser manual
Feature:
Wireless control,easy toinstall
ControlLights,Motors,Fans, electricallyoperated Doors /Locks/Windows / Blinds/Cars or Other ApplianceswithAC110~240V orDC0~28V.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscancontrolone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Working distanceoftransmitter andreceiver withexternalextend antenna: 2000M/ 6000ft (theoretically)
Receiver:
ModelNo.: S1XB-DC06-ANT2/ S1XB-DC09-ANT2/ S1XB-DC12-ANT2/ S1XB-DC24-ANT2
Channel: 1CH
ControlModes: Toggle, Momentary, Latched
Coding Type: Fixed code
Coding Setting:Bylearning
Power Supply(Operating Voltage):DC6V(S1XB-DC06-ANT2),DC12V 1V(S1XB-DC12-ANT2),DC9V 1V(S1XB-DC09-ANT2),DC24V 1V
(S1XB-DC24-ANT2)
Output:DC6V (S1XB-DC06-ANT2), DC12V(S1XB-DC12-ANT2), DC9V (S1XB-DC09-ANT2), DC24V(S1XB-DC24-ANT2)
PCBSize:67mm x50mm x18mm
CaseSize: 75mm x54mm x27mm
StaticCurrent: ≤6mA
MaximumWorkingCurrent: 10A
ExternalExtendAntenna:
FrequencyRange: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
CableLength: 150cm
Weight:35g
Anti-interference,waterproof, shielded wire set inside
Magneticstand design for easytoinstall
Transmitter:
ModelNo.: CB-12
Channel: 12 CH
RemoteControlDistance: 1000m/3000ft (theoretically)
Encode:Fixed code by soldering
Unitsize: 135mm x42mm x25mm
Power Supply: 1x6F22-9V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following):
1) Setting controlmode Toggle:OnlyconnectJumper-2.
Press button 1:Turn on the relay,terminalA&Bof receiver 1outputs DC power.
Press button 1again: Turn off therelay, terminalA&B of receiver 1nooutput.
…
Press button 12:Turn on the relay,terminalA&Bof receiver 12 outputs DC power.
Press button 12 again: Turn off therelay, terminalA&Bofreceiver 12no output.
2) Setting controlmode Momentary: Only connect Jumper-1.
Press and holdbutton 1:Turn on the relay, terminalA&Bofreceiver 1outputs DC power.
Releasebutton 1:Turn offthe relay, terminalA&Bofreceiver 1nooutput.
…

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
Press and holdbutton 12:Turn on the relay,terminalA&B of receiver 12 outputs DC power.
Releasebutton 12:Turn offthe relay, terminalA&Bof receiver 12 no output.
3) Setting controlmode Latched: Do notconnectJumper-1 and Jumper-2.
Press button 1:Turn on the relay,terminalA&Bof receiver 1outputs DC power.
Press otherbuttons:Turn offthe relay, terminalA&Bofreceiver 1nooutput.
…
Press button 12:Turn on the relay,terminalA&Bof receiver 12 outputs DC power.
Press otherbuttons:Turn offthe relay, terminalA&Bofreceiver 12 nooutput.
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
LEARNINGthe remotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Press anybutton onthe transmitter;the receiver will learn thecorresponding button on the transmitter.
4) When receiver isinthe statusofLEARNING,press againthe buttonofreceiver,signalLEDturnsoff,itmeanslearning process isdiscontinued.
5) The receiver can learn severalremotecontrols withdifferent codes.
Application Circuit
Powersupply
Lamp
_
+
Relay
A B C
Jumper-2
Jumper-1
Button
SignalLED
PowerLED
Antenna
RFmodule
IC
+
_