URC RM-2 User manual

Owner's Manual
RM-2
Two-Way Wi-Fi Remote Control

500 Mamaroneck Avenue, Harrison, NY 10528
Phone: [phone] Fax: [phone]
This remote control was Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a
multi-room system is one of the most challenging tasks within an
audio/video installation. It involves an intimate knowledge of how
the components interact and exact details on the proper
sequences of control.
Only a ccGEN2 dealer has the requisite experience and training
to quickly and effectively customize a remote control for true
automated operation.
Congratulations on your choice!
RM-2 Owner's Manual © 2013 Universal Remote Control, Inc.
The information in this owner’s manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this owner’s manual may be subject to change without prior notice.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
ccGEN2 is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

RM-2 TWO-WAY Wi-Fi REMOTE
Congratulations! 1
Features and Benefits 1
Before Getting Started 2
Parts Guide 2
Connecting the Battery Pack 3
Using the Charging Base 3
Two-Way via Wi-Fi 3
Using the RM-2 4
Displaying the Settings Menu 5
Sleep Settings 6
Wireless Network Settings 6
Brightness 6
System 7
Button Light 7
Power 7
Date and Time 7
Sound 8
Pickup 8
Factory Default 8
Exit 8
Specifications 9
Limited Warranty Statement 10
End User Agreement 12
Precautions and Information Concerning Rechargeable
Lithium Polymer Batteries 13
Federal Communication Commission Interference
Statement 14
Declaration of Conformity 15

Page 1
RM-2 TWO-WAY Wi-Fi REMOTE
Congratulations!
Thank you for purchasing the RM-2 Two-Way Wi-Fi remote
control for your ccGEN2 system. This remote offers two-way
control of your connected devices throughout the home or
small office space. With the integrated Rooms Menu,
controlling devices in other areas is simple using the RM-2’s
Two-Way Wi-Fi communication.
Features and Benefits
● Quick Connect Wi-Fi
When picked up, the RM-2 connects to Wi-Fi within
moments to control your ccGEN2 system and devices.
● Two-way meta-data feedback
Experience two-way feedback right on the remote's
screen when used with compatible devices like URC's
iPod Dock (PSX-2), or selection of IP Cameras. Enjoy
the same feedback when used in conjunction with an
ever expanding line of 3rd party products (speak with
your custom professional to learn more.)
● Pick-up sensor
Lifting the remote immediately wakes it up, turns on the
backlight, the LCD screen, and quickly connects to the
local Wi-Fi for control of your ccGEN2 system.
●Rechargeable Lithium Polymer Battery and charger base
Save money and protect the environment by using the
included charging base and rechargeable lithium ion
polymer battery.

Page 2
Before Getting Started
● Only for use in a ccGEN2 System
When used with a CP-1 Central Processor, the RM-2
can control your system without being in line-of-sight of
the equipment by sending the commands over your
home network.
● Programmable only by a URC certified professional
programmer onsite or offsite via the Internet
To fully automate your audio/video system, the
programmer must have detailed knowledge of each
component, LAN configuration, Wi-Fi optimization and
how the system is connected and operated. With the
ability to connect the RM-2 to a CP-1 Central Processor,
your installer can program the remote, with your
permission, from a remote location should the need
arise. Only a trained and certified professional
audio/video installer can install a RM-2 remote control in
a timely and efficient manner.
Parts Guide
What’s included with the RM-2:
●RM-2 Wi-Fi Remote Control
●Lithium Ion Polymer Rechargeable Battery
●AC Power Adapter for Charger Base
●Charger Base
●Room Labels
●Cleaning Cloth
● Owner’s Manual
RM-2 TWO-WAY Wi-Fi REMOTE

Page 3
RM-2 TWO-WAY Wi-Fi REMOTE
Connecting the Battery Pack
Press the spring lock down to unlock and remove the cover.
The battery is included in the box when shipped from the
factory. Place the battery into the battery compartment,
making sure to align the contacts on the battery to the
contacts on the RM-2. The battery will snap into place when
aligned properly. Replace the cover.
Using the Charging Base
Plug the 6V DC adapter into a power
outlet and into the rear of the charging
base. (Also plugs into the remote for direct
charging.) Gently place the RM-2 into the
cradle. The remote automatically aligns
itself to the contacts on the charging base.
The status light should immediately
illuminate.
●Red indicates that it is charging.
●Blue shows that it is fully charged.
Two-Way via Wi-Fi
To use the RM-2 with any two-way companion product, it
must be configured by your installer to be part of a LAN
(local area network) via a Wi-Fi b/g access point or router.
This is not user configurable. If you have any questions,
consult your custom installer.

Page 4
Using the RM-2
The RM-2’s Main Menu pages display the activities and
devices in your system. Press the Main page button to view
your activities and devices. Large systems may have more
than one page. Press either of the Page buttons to view
additional pages.
Once within a Device or Activity, the Page buttons may
reveal additional buttons. Press any button adjacent to the
screen, to select an activity or device.
Press the Main button to return to that page and select a new
device or activity.
RM-2 TWO-WAY Wi-Fi REMOTE
The 5-way cursor
buttons are used to
navigate through a
device's menu
with ease.
The Main button
always displays the
Main menu
pages.
The Page buttons
display additional
pages of controls,
devices or activities.
The Volume and
Mute buttons are
always available
regardless of what
screen is displayed.

Page 5
Displaying the Settings Menu
You can enter the Settings menu by pressing and holding the
Main and Enter buttons for three seconds. When the Settings
menu appears, any further action must be completed within
60 seconds, at which point the remote will revert back to the
Main Menu screen.
Use the Page buttons to navigate between the two Settings
pages. To select a setting, press the button on the LCD screen.
To go back a step or to get out of the Settings menu, press
the Main button.
RM-2 TWO-WAY Wi-Fi REMOTE
Page buttons reveal the
rest of the settings.
Page 2 of the Settings
Screen

Sleep Settings
You can adjust the amount of time the LCD
remains ON when the remote is not in use.
The time can be set independently based on
whether the remote is using battery power or
sitting on the cradle.
Once the Sleep Timers are adjusted, press the
Ok button. Pressing the Cancel button will revert to the
remotes last saved setting.
Wireless Network Settings
WARNING! Only use this button when
instructed to by Technical Support or your
Custom Professional. The screen displays
network information about your RM-2 and the
connected wireless network. Do not make any
changes on this screen!
Brightness
Adjust the screen brightness by pressing the
adjacent hard buttons to increase or decrease
the brightness level.
Once the brightness is adjusted, press the Ok
button. Pressing the Cancel button will revert
to the remotes last saved setting.
Note: The higher the brightness, the faster the batteries will deplete.
Page 6
RM-2 TWO-WAY Wi-Fi REMOTE

Page 7
System
The System Information screen displays data
about your RM-2's Operating System, Memory
etc.
Press the More button to view further system
information. Pressing the Cancel button will
exit to the remote’s settings menu.
Button Light
You can adjust the brightness of the LEDs that
backlight the buttons of the RM-2. Press the
adjacent hard buttons to increase or decrease
the button light level.
Once the button light is adjusted, press the Ok
button. Pressing the Cancel button will revert
to the remote’s last saved setting.
Power
You can display the remaining battery level by
selecting Power. You can also adjust when the
Low Battery warning screen will appear.
Once the power is adjusted, press the Ok
button. Pressing the Cancel button will revert
to the remote’s last saved setting.
Date and Time
The RM-2’s date and time has been previously
set. If you need to, you can adjust the date and
time by changing the settings on this screen.
After adjusting the date and time, press the Ok
button. Pressing the Cancel button will revert
to the remote’s last saved setting.
RM-2 TWO-WAY Wi-Fi REMOTE