Follett Horizon Elite HCF1010R/N User manual

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 1
Horizon Elite™ 1010/1410 Ice Machines
(Remote Condensing)
User Guide
After Serial Number L82638
Please visit www.follettice.com/technicaldocuments
for the Operation and Service manual for your unit.
Installation and Service Videos:
www.follettice.com/servicevideolibrary
01252592R06
801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com
Welcome to Follett
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide
carefully before you begin your installation.
Should you need technical help, please call our Technical Service group at [phone] or [phone].
Please have your model number, serial number and complete and detailed explanation of the problem when
contacting Technical Service.
Getting Started
After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. All freight
is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt
"damaged." Follett Customer Service must be notied within 48 hours. Wherever possible, please include detailed
photos of the damage with the original packaging so that we may start the freight claim process.
HCD1010R/N, HCD1410R/N,
HMD1010R/N, HMD1410R/N,
HCF1010R/N, HCF1410R/N,
HMF1010R/N, HMF1410R/N

2 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
CAUTION
§Installation and service must be performed in accordance with all federal, state and local laws. It is the
responsibility of the technician to ensure that these requirements are met.
§Warranty does not cover exterior or outside installations.
§Moving parts. Do not operate with front cover removed.
§Hot parts. Do not operate with cover removed.
§To reduce risk of shock, disconnect power before servicing.
§Drain line must not be vented.
§Water supply must have particle ltration.
§Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution label
on product and follow instructions carefully.
§Ice is slippery. Maintain counters and oors around dispenser in a clean and ice-free condition.
§Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
Specications
Electrical
Separate circuit and equipment ground required.
Evaporator unit
Standard electrical: 115/60/1
Maximum fuse: 15A
Amperage: 5A
Condensing unit
Electrical Min Circuit
Ampacity
Max Circuit HVACR
breaker size
1010 Single-Phase (Tecumseh AJA7490ZXDPN)
208-230 V, 60 Hz
10.7A 15A
1010 Single-Phase (Tecumseh ASFR9510ZNAMC1) 10.7A 15A
1410 Single-Phase (Tecumseh AWA9513ZXDPN) 19.3A 30A
1410 Single-Phase (Tecumseh ASFS9516ZNAMC1) 16.4A 25A
1010 3-Phase (Tecumseh AWA9490ZXTPN) 9.9A 15A
1010 3-Phase (Tecumseh ASFR9511ZFAMC1) 9.9A 15A
1410 3-Phase (Larkin AWA9517ZXTPN) 15A 15A
1410 3-Phase (Larkin LZT015M6CFIM) 15A 20A
Plumbing
WARNING
This equipment to be installed with adequate backow protection to comply with applicable federal, state, and
local codes.
Notes:
§Water supply must have particle ltration. Follett recommends the lter system that has integral scale inhibitors.
(Follett item# 00130286).
§Follett does not recommend the use of water softeners or bowl scale inhibitors.
§The potable water total dissolved solids (TDS) content must be greater than 10 ppm for the water control
system to function properly. If using reverse osmosis water ltration system, ensure TDS level is greater than
10ppm.

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 3
Evaporator plumbing
§3/8" OD push-in water inlet - 3/8" OD tubing required.
§Water shut-off recommended within 10 feet (3 m).
§Follett recommends installation of Follett water lter system (part# 00130286) in ice machine inlet water line.
Flush drain plumbing
§3/4" MPT ush drain connection at the rear of the machine.
§Drain must slope 1/4" per foot (6 mm per 30,4 cm).
§Drain line should not be shared with any other piece of equipment.
§Drain line cannot be reduced to a size smaller than 1".
§Drain should be piped without a vent.
3/4" barb x 3/4" FPT
1" Stand pipe/Drain
2 ft. x 1" OD
silicone tubing
Minimum 8"
radius
3/4" MPT x 1" slip
1" PVC Drain
2 ft. x 1" OD
silicone tubing 3/4" MPT x 1" slip
3/4" barb x 3/4" FPT
1'
1/4" per foot
(6,4 mm per 0,3 m)
Chassis drain plumbing
§Plug must be removed from John Guest tting.
§Route 3/8" drain tubing through knockout in back of docking station and insert fully into John Guest tting
connection at the rear of the machine chassis. Route other end of 3/8" drain tubing to drain.
§Drain must slope 1/4" inch per foot (6 mm per 30,4 cm).

4 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
Ambient
Evaporator unit
Air temperature 100 F/38 C max. 50 F/10 C min.
Water temperature 90 F/32 C max. 45 F/7 C min.
Water pressure 70 psi max. (483 kPa) 10 psi min. (69 kPa)
Condenser unit
Air temperature 120 F/49 C max. –20F/–29C min.
Refrigeration
§3/8" liquid line
§5/8" suction line
Note: Rack system installations require a capacity of 10,000 BTU/hr for 1010 machines and 13,000 BTU/hr for
1410 machines at 0 F (–18 C) evaporator temperature. Evaporator pressure regulator (not supplied) is
required.
Weight
Evaporator unit: 125 lbs (57 kg)
Condensing unit:
Horizon Elite 1010 series Horizon Elite 1410 series
Approximate
ship weight
260 lb (118 kg) – All others
212 lb (96 kg) – Tecumseh ASFS9516ZNAMC1
232 lb (105 kg) – Tecumseh AJA7490ZXDPN
270 lb (122 kg) – Tecumseh AJA7490ZXDPN
234 lb (106 kg) − Tecumseh ASFS9516ZNAMC1
230 lb (104 kg) – three phase (Larkin)
Approximate
net weight
250 lb (114 kg) – All others
180 lb (82 kg) – Tecumseh AJA7490ZXDPN
200 lb (91 kg) – Tecumseh ASFS9516ZNAMC1
260 lb (118 kg) – Tecumseh AWA9513ZXDPN
202 lb (92 kg) – Tecumseh ASFS9516ZNAMC1
210 lb (95 kg) – three phase (Larkin)
Ice production
1010 ice machine capacity/24 hrs.
Ambient Air Temperature F/C
Evap Potable Water Temperature F/C
F 60 70 80 90 100
C16 21 27 32 38
50 1051 978 906 834 763 lbs
10 477 444 411 379 346 kg
60 994 925 855 796 737 lbs
16 451 420 388 361 335 kg
70 937 871 805 758 711 lbs
21 425 395 365 344 323 kg
80 904 839 774 727 680 lbs
27 410 381 351 330 309 kg
90 872 807 743 696 648 lbs
32 396 366 337 316 294 kg
1410 ice machine capacity/24 hrs.
Ambient Air Temperature F/C
Evap Potable Water Temperature F/C
F 60 70 80 90 100
C16 21 27 32 38
50 1474 1372 1269 1212 1154 lbs
10 669 623 576 550 524 kg
60 1385 1292 119 8 114 8 1097 lbs
16 628 586 544 521 498 kg
70 1296 1212 1127 1083 1039 lbs
21 588 550 5 11 492 472 kg
80 1239 115 5 1072 1030 988 lbs
27 562 524 487 468 449 kg
90 90 118 1 1099 1017 976 lbs
32 32 536 499 462 425 kg

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 5
Dimensions and clearances
§Entire front of ice machine must be clear of obstructions/connections to allow removal.
§1" (26 mm) clearance above ice machine for service.
§1" (26 mm) minimum clearance on sides.
§The intake and exhaust air grilles must provide at least 250 sq in (1615 sq cm) of open area.
§Air-cooled ice machines – 18" (458 mm) minimum clearance between discharge and air intake-grilles.
A 21.26" (54.0 cm)
B21.11" (53.6 cm)
C23.77" (60.4 cm)
D2.66" (6.8 cm)
E19.59" (49.8 cm)
F16.00" (40.6 cm)
G2.73" (6.9 cm)
H2.28" (15.3 cm)
I6.04" (5.8 cm)
J22.00" (55.9 cm)
K22.69" (57.6 cm)
A
B
C (1410 ONLY)
D (1410 ONLY)
NEMA 5-15
RIGHT ANGLE
E
F
H
J
I
G
K
1410 ONLY
1410 ONLY

6 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
Condensing unit
W1
D1
H1
W1
D1
H1
1010/1410 single phase (Tecumseh)
1010 three phase (Tecumseh)
1410 three phase (Larkin)
Horizon Elite 1010 series Horizon Elite 1410 series
W1 Width 39.9" (101.3 cm) – Model
ASAFR9510ZNAMC1,
ASFR9511ZFAMC1
36.25" (91.4 cm) – Models AJA7490ZXDPN and
AWA9490ZXTPN
39.9" (101.3 cm) – Model
ASFS9516ZNAMC1
37.75" (95,9 cm) – three phase (Larkin)
D1 Depth 28.5" (72.4 cm) – Model
ASAFR9510ZNAMC1,
ASFR9511ZFAMC1
25.50" (64.8 cm) – Models AJA7490ZXDPN
and AWA9490ZXTPN
28.5" (72.4 cm) – Model
ASFS9516ZNAMC1
28.25" (71,6 cm) – three phase (Larkin)
H1 Height 21.5" (54.6 cm) – Model
ASAFR9510ZNAMC1,
ASFR9511ZFAMC1
26.10" (66.3 cm) – Models AJA7490ZXDPN and
AWA9490ZXTPN
21.5" (54.6 cm) – Model
ASFS9516ZNAMC1
19.75" (50,2 cm) – three phase (Larkin)
Electrical single phase – 208-230/60/1
three phase – 208-230/60/3
single phase – 208-230/60/1 (Tecumseh)
three phase – 208-230/60/3 (Larkin)
Minimum circuit ampacity single phase – 10.7A
three phase – 9.9A
single phase – 19.3A (Tecumseh AWA9513ZXDPN)
single phase – 16.4A (Tecumseh ASFS9516ZNAMC1)
three phase – 15A (Larkin)
Maximum overcurrent
protection
single phase – 15A
three phase – 15A
single phase – 30A (Tecumseh AWA9513ZXDPN)
single phase – 25A (Tecumseh ASFS9516ZNAMC1)
three phase – 15A (Larkin LZT015M6CFIM)
three phase – 20A (Larkin LCH0015MCACZ)
Outdoor condensing unit
operating limits
(air temperature)
min –20 F (–29 C)
max 120 F (49 C)
min –20 F (–29 C)
max 120 F (49 C)
Maximum refrigerant line
run length
100' (30,5 m) 100' (30,5 m)
Maximum line rise above
evaporator
35' (10,7 m) 35' (10,7 m)
Evaporator mounting above
condenser
15' (4,6 m) 15' (4,6 m)
Maximum refrigeration line
drop without oil trap
15' (4,6 m) 15' (4,6 m)
Refrigerant charge 12.5 lb required at installation 12.5 lb – single phase (Tecumseh)
10 lb – three phase (Larkin)
required at installation
Approximate ship weight 260 lb (118 kg) – All others
212 lb (96 kg) – Tecumseh ASFS9516ZNAMC1
232 lb (105 kg) – Tecumseh AJA7490ZXDPN
270 lb (122 kg) – Tecumseh AJA7490ZXDPN
234 lb (106 kg) − Tecumseh ASFS9516ZNAMC1
230 lb (104 kg) – three phase (Larkin)
Approximate net weight 250 lb (114 kg) – All others
180 lb (82 kg) – Tecumseh AJA7490ZXDPN
200 lb (91 kg) – Tecumseh ASFS9516ZNAMC1
260 lb (118 kg) – Tecumseh AWA9513ZXDPN
202 lb (92 kg) – Tecumseh ASFS9516ZNAMC1
210 lb (95 kg) – three phase (Larkin)

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 7
Operation
Cleaning/sanitizing and preventive maintenance (all models)
Note: Do not use bleach to sanitize or clean the icemaker.
Preventive maintenance
Periodic cleaning of Follett’s icemaker system is required to ensure peak performance and delivery of clean,
sanitary ice. The recommended cleaning procedures that follow should be performed at least as frequently as
recommended, and more often if environmental conditions dictate.
Cleaning of the condenser can usually be performed by facility personnel. Cleaning of the icemaker system,
in most cases, should be performed by your facility’s maintenance staff or a Follett authorized service agent.
Regardless of who performs the cleaning, it is the operator’s responsibility to see that this cleaning is performed
according to the schedule below. Service problems resulting from lack of preventive maintenance will not be
covered under the Follett warranty.
Weekly exterior care
The exterior may be cleaned with a stainless cleaner such as 3M Stainless Steel Cleaner & Polish or equivalent.
Monthly condenser cleaning (air-cooled icemaker only)
1. Use a vacuum cleaner or stiff brush to carefully clean condenser coils of air-cooled icemakers to ensure
optimal performance.
2. When reinstalling counter panels in front of remote icemakers, be sure that ventilation louvers line up with
condenser air duct.
Semi-annual evaporator cleaning (every 6 months)
WARNING
• Wear rubber gloves and safety goggles (and/or face shield) when handling ice machine cleaner or sanitizer.
CAUTION
• Use only Follett approved SafeCLEAN Plus™ cleaning solution.
• DO NOT USE BLEACH.
• It is a violation of federal law to use these solutions in a manner inconsistent with their labeling.
• Read and understand all labels printed on packaging before use.
Note: Complete procedure for cleaning an sanitizing MUST be followed. Ice must be collected for 10minutes
before putting ice machine back into service.
Fig. 1
1. Press the CLEAN button. The machine will drain. The
auger will run for a short time and then stop. Wait for
the LOW WATER light to come on. LO WATER

8 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
Fig. 2
2. Follow the directions on the SafeCLEAN Plus
packaging to mix 1 gal. (3.8 L) of Follett SafeCLEAN
Plus solution. Use 100 F (38 C) water.
3. Using a 1 quart (1 L) container, slowly ll cleaning cup
until CLEANER FULL light comes on. Do not overll.
4. Place one SaniSponge™ cleaning sponge in
remaining sanitizing and cleaning solution and retain
for Step 9.
Note: Do not use bleach to sanitize or clean the icemaker.
CLEANER FULL
Fig. 3
5. Replace cover on cleaner cup. Machine will clean,
then ush 3 times in approximately 15 minutes. Wait
until machine restarts.
15
Fig. 4
6. To clean/sanitize ice transport tube – Press power
switch OFF

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 9
Fig. 5
7. Disconnect coupling as shown.
Fig. 6
8. Using disposable foodservice grade gloves, insert dry
SaniSponge cleaning sponge.
9. Insert SaniSponge cleaning sponge soaked in
SafeClean Plus (from Step 4).
10. Push both SaniSponge cleaning sponges down ice
transport tube with supplied pusher tube. 1
2
3
16"
(407 mm)
Fig. 7
11. Remove and discard 16" (407 mm) pusher tube.

10 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
Fig. 8
12. Reconnect coupling. Press power switch ON. Ice
pushes SaniSponge cleaning sponges through ice
transport tube.
Fig. 9
13. Place a sanitary (2 gal. or larger) container in bin or
dispenser to collect SaniSponge cleaning sponges
and ice for 10 minutes.
14. Collect 5.5 lbs (3 kg) of ice from unit. Discard ice and
SaniSponge cleaning sponges.