for Living 168-0100-4 User manual

IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
NEED HELP? GIVE US A CALL!
WE’RE HERE FOR YOU.
TOLL-FREE:
1-877-483-6759
MESH BACK OFFICE CHAIR
Product No. 168-0100-4
Assembly Instructions

From your rst apartment to
downsizing your family home,
For LIVING® is a great place to start.
Uncomplicate your life with timeless
style and reliable quality that delivers
everyday solutions for your home.
Let us know how our products
work for you. Rate and review at
canadiantire.ca

3
Table of Contents
Needed for Assembly :
1person
MESH BACK OFFICE CHAIR
Warning! Please use your furniture correctly and safely. Improper use
can cause safety hazards or damage to your furniture or household
items. Carefully read the following safety information.
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly.
Add a layer of protective surface if needed.
•Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is
scratched. This is a natural process. To minimize this condition, it is recommended that care
be taken when assembling and handling the product in order to prevent the paint from
being scratched.
3
4
5
6
7
8
Important Safety Instructions
Parts List
Exploded Parts
Hardware List
Before You Begin Assembly
Step-by-step Guide
15
16
16
17
Technical Data
Troubleshooting
Caring for Your Item
Warranty
To avoid damage, ensure
screws are hand tightened.
DO NOT USE POWER
TOOLS TO ASSEMBLE
YOUR UNIT.

4
Parts List
Item Thumbnail Quantity
MESH BACK OFFICE CHAIR
15
21
31
41
51
61
71
2
8
Description
Castor
Base
Gas Lift
Telescopic Cover
Seat plate
Seat Cushion
Back Cushion
Armrest (Left and Right)

5
Exploded Parts
MESH BACK OFFICE CHAIR
1
2
3
4
5
6
7
8
8

6
Hardware List
Item Thumbnail Quantity
MESH BACK OFFICE CHAIR
A4
B4
C2
D4
E1
Description
M8x22 mm Bolt
M6x35 mm Bolt
M6x30 mm Bolt
M6x25 mm Bolt
Hex Key

7
Before You Begin Assembly
?
Make Sure All Parts Are Present
Compare all pieces to the parts and hardware lists, and make sure you have all tools
required for assembly.
Assemble in a Cleared Area
Place all parts from the box on the floor in front of you on a clean, dry, level
surface to protect the product as it is being built.
Remove Packaging Materials
Place packing materials back in the box. Do not dispose of packaging materials until
assembly is complete.
Read Each Step Carefully
Make sure you understand each step. If you have any questions, call the For LIVING®
customer service centreat 1-888-660-6684 (toll free).
MESH BACK OFFICE CHAIR

8
Step-by-step Guide
MESH BACK OFFICE CHAIR
Step 1
1 x52 x1
Place the base (2) upside down on the ground. Insert the five castors (1) into the
base.
NOTE: Please make sure all castors are firmly inserted.
1
2

9
Step-by-step Guide
MESH BACK OFFICE CHAIR
Step 2
3 x14 x1
Remove the cap on top of the gas lift (3) before assembly.Turn the base (2) right side up,
insert gas lift (3) into the centre hole of base (2), and place telescopic cover (4) over the gas
lift (3).
3
2
3
4

10
Step-by-step Guide
MESH BACK OFFICE CHAIR
Step 3
5 x1A x4E x1 6 x1
E
Attach the seat plate (5) to the base of the seat cushion (6) using bolts (A) and
securing with hex key (E).
Note :
Do not tighten screws all the
way until you’ve assembled
the chair. Once assembly is
complete, tighten each screw.
5
A
6
A

11
Step-by-step Guide
MESH BACK OFFICE CHAIR
Step 4
E
8 x1C x2E x1 B x4
8
B
BB
C
Attach the armrests (8) to each side of the seat cushion (6) with bolts (B) and (C).
Tighten 80% with hex key (E). DO NOT fully tighten.
Note :
Do not tighten screws all the
way until you’ve assembled
the chair. Once assembly is
complete, tighten each screw.
6

Step-by-step Guide
Step 5
Carefully lower the seat plate (5) onto the gas lift (3).
12MESH BACK OFFICE CHAIR
3
5

Step-by-step Guide
Step 6
7 x1D x4E x1
Attach the back cushion (7) to the armrests (8) with bolts (D). Tighten 80% with
hex key (E). DO NOT fully tighten.
13
MESH BACK OFFICE CHAIR
D
D
E
7
Note :
Do not tighten screws all the
way until you’ve assembled
the chair. Once assembly is
complete, tighten each screw.
8

14MESH BACK OFFICE CHAIR
Note :
Ensure all bolts are securely
tightened using the hex key (E)
before using this chair.
Step-by-step Guide
Step 7
Tighten all bolts using hex key (E).The assembly is complete.

Technical Data
Specications
Assembled Dimensions (W x D x H)
Assembled Weight
Maximum Weight Capacity
36 3/16 – 40 1/8''
(92 –102 cm)
15
MESH BACK OFFICE CHAIR
26 3/4 x 27 3/8 x 36 3/16 – 40 1/8‘’
68 x 69.5 x 92 – 102 cm
20.9 lb
9.5 kg
220 lb
100 kg
26 3/4''
(68 cm)
27 3/8''
(69.5 cm)

Troubleshooting
Caring for Your Item
Need help?
Give us a call! We’re here for you.
If you have questions regarding your product
or require warranty assistance, please call our
customer service helpline.
Toll-free: 1-877-483-6759
Before returning your
product to store Call us rst!
1
3
5
2
4
16MESH BACK OFFICE CHAIR
Always keep children under close supervision while they are using or around this
product. Never leave children unattended.
This product is intended for domestic indoor use only.
Clean with a dry cloth for the upholstery and frame. Do not use acetone, abrasive, or
other special detergents as they would be harmful to the product’s finish.
Do not stand or step on this chair. Use for seating only one person at one time.
Do not exceed maximum weight capacity of 220 lb (100 kg).

Warranty
1-Year Limited Warranty*
This For LIVING®product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Model No. 168-0100-4
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
17
MESH BACK OFFICE CHAIR