m-Dimension 1508 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#1508 Arm Chair
Page 1
#1508 Arm Chair
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!Assistance is required to assemble this chair.
!Never stand on the chair or use it as a ladder.
!
!
!
!
!
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#1508 Arm Chair
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
1
4
6
4
2
Wood Plug
I
H
E
Part Drawing Part
Name Qty. Part Drawing Part Name Qty.
A Back 1
1
Seat
B
C Right Arm 1
D
2
Front Leg
G
F Long Bolt
with Washers
Medium Bolt
with Washers
Short Bolt
with Washers
Allen Wrench
1
Left Arm
J

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1508 Arm Chair
Assembly Instructions
Step 2 - Lay the Seat (Part B) on a flat surface. Align the bolt holes in the front corner of the Seat and the
bolt holes in the Front Legs (Part E). Hand thread four Medium Bolts with Washers (Part G) through
the Seat and into the Front Legs. Fully tighten the Bolts using the Allen Wrench (Part I) Do not over
tighten the Bolts.
Step 3 - Lay the Back (Part A) on a flat surface. Align the bolt holes in the rear corners of the Seat (Part B)
with the bolts holes in the Back. Hand thread four Long Bolts with Washers (Part F) through the
Seat and into the Back. Hand thread two Medium Bolts with Washers (Part G) through the Seat and
into the Back. Tighten the bolts using the Allen Wrench (Part I). Do not fully tighten the bolts.
B
E
E
G
I
A
F
I
I
G

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#1508 Arm Chair
Assembly Instructions
Step 5 - Turn the Chair upright. Align the bolt holes in the end of the Right Arm with the bolt holes in
the Back (Part A). Insert a Short Bolt with Washers (Part H) clockwise through the Back and
into the Arm. Tighten the Bolt using the Allen Wrench (Part I). Do not over tighten the Bolt
Repeat steps 4 and 5 to attach the Left Arm (Part D).
Step 4 - Align the the bolts holes in the Right Arm (Part C) with the bolts holes in right side of the Seat
(Part B). Insert a Short Bolt with Washers (Part H) clockwise through the Seat and into the Arm.
Tighten the Bolts using the Allen Wrench (Part I). Do not fully tighten the Bolt.
H
I
I
H
A
C
B
E
E
A
B

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 5
#1508 Arm Chair
Assembly Instructions
J
Step 7 - Insert two Wood Plugs (Part J) into the bolt holes in the back-side of the Back (Part A).
Step 6 - Fully tighten all the bolts inserted in steps 3 and 4 using the Allen Wrench (Part I) .
Do not over tighten the bolts.
A
Assembly is complete!