Home Styles 88 5670 35 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5670 35
Urban Outdoor
High Dining Table
A.
Top
1 Pc.
B.
Frame
1 Pc.
C.
Stretcher
1 Pc.
D.
Leg
2 Pcs.
E.
Leg
2 Pcs.
Flat Washer
8 Pcs.(+1 extra)
Spring Washer
4 Pcs.(+1 extra)
Head Cap Bolt
16 Pcs.(+1 extra)
Hex Wrench
1 Pc.

Assembly Instructions 2
STEP 1
Attach Legs (D) to the ends of
Stretcher (C) which have the Arrow
stickers, using Head Cap Bolts,
Spring Washers and Flat Washers.
(see Figure 1)
Attach Legs (E) to Stretcher (C) with
Head Cap Bolts, Spring Washers and
Flat Washers.
Tighten all Head Cap Bolts only half
way with Hex Wrench.
(see Figure 2)
STEP 2
Attach Frame (B) to unit with Head Cap Bolts.
Tighten all Head Cap Bolts completely with
Hex Wrench.
D
E
E
D
B
C
Figure 2
Figure 1
/3
Head Cap Bolt
Head Cap Bolt
Flat Washer
Spring Washer
Arrow Sticker
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.

Assembly Instructions 3
STEP 3
Attach Top (A) to unit with Head Cap Bolts
and Flat Washers and tighten.
(see Figure 3)
STEP 4
Turn the table to its’ upright position.
Head Cap Bolt
Flat Washer
A
/3
Figure 3