Forward Industries highmore Aggro HM-GD008-001 User manual

8
Issue 1 - 30/09/21

1. The maximum weight that can be placed on this product is 176.4lbs.
2. This product must not be used as a seat.
3. Check carefully to ensure correct and complete assembly before using.
4. Don’t allow children to play near the chair as their behaviour is unpredictable. The manufacturer or
importer is not responsible for loss, injury, or damage due to improper actions or use.
5. Do not use corrosive or abrasive materials near the product. Please ensure that the cleaner used will
not pollute the environment.
6. Cleaning should not be attempted by children without supervision.
7. Please make sure there are no hazard sources in your operating environment. e.g., do not leave tools
around. Always be careful to dispose of the packaging materials in order to avoid any possible danger,
e.g. plastic bags may lead to choking hazard to children.
8. We recommend you keep the original packaging of the item in case of the need for return or future
transportation.
9. Do not use outdoors. SAVE THESE INSTRUCTIONS. For Household use only.
LED light:
Power supply voltage: DC 5V

1 2 3
5 6 7
4
8 10 11
12 14 15
Table leg Qty 2
(20.86x0.98x28.11")
Support Qty 2
(34.65x1.06x1.1")
Rear brace (Left)
Qty 1 (7.87x1.97")
Table top Qty 1
(39.37x23.62x0.59")
Cup holder Qty 1
(7.09x2.76")
Headphone hook Qty 1
(5.12x1.97")
Rear brace (Right)
Qty 1 (7.87x1.97")
Cable management box
Qty 1 (16.54x5.51x2.76")
9Cable management
bracket (Left) Qty 1
(4.72x4.33x0.39")
Cable management
bracket (Right) Qty 1
(4.72x4.33x0.39")
Leg cover Qty 2
(5.91x3.94x1.57")
Cable clip (Right)
Qty 1 (2.36x0.71")
13
Cable clip (Left)
Qty 1 (2.36x0.71")
16
Mouse pad Qty 1
(31.49x11.81")
17
Decal (Left)
Qty 1 (9.84x1.77")
LED side Extension
(Left) Qty 1
(21.26x4.72x0.98")
18
Decal (Right)
Qty 1 (9.84x1.77")
LED side Extension
(Right) Qty 1
(21.26x4.72x0.98")
UNDERSIDE

Allen key Qty 1
Screw
M8x8.26" Qty 8
Nut
M8x1.96" Qty 2
Height adjustable foot
Qty 4
Screw
M4x6.29" Qty 52 Phone holder Qty 7
LED cable Qty 1
Pen holder Qty 1 Cable tie Qty 5

Assemble rear braces
and in the positions
shown,at the back of the
desk.
Secure using fixings and
.
Allen key Qty 1
Screw
M8x8.26" Qty 4
Assemble supports in
between legs using
screws .
Screws need to be checked
and tightened again after
assembly is completed.
Tighten all screws.
AB
Allen key Qty 1
Screw
M8x8.26" Qty 4
AB
Nut
M8x1.96" Qty 2
CBBBBB
STEP 1
2
1
11
3
3
4
4
2
2
2
2
4
Back
Back
Front
Front
BBBCC
STEP 2

EE
With help, carefully place
desk top upside down
onto a clean, flat, protected
surface.
With help, locate leg frame
into position and secure
using screws .
STEP 3
5
5
Back
Front
Shown Upside Down
Allen key Qty 1
Screw
M4x6.29" Qty 16
AE
UNDERSIDE
Assemble the two parts of
cup holder together as
shown.
Assemble cup holder and
headphone hook to the
underside of desk top
using screws .
Screw height adjustable feet
into the underside of
legs .
EEEDD
5
5
STEP 4
6
6
7
7
1
1
1
Back
Front
Shown Upside Down
Allen key Qty 1
Height adjustable
foot Qty 4
AD
Screw
M4x6.29" Qty 6
E
6
6

Assemble cable clips and
to the underside of desk
top using screws .
Note: Cable clips are located
at the back.
12
10
10
12
12
13
13
13
EEEEEE
Assemble cable
management brackets
and to the back of
desk top using
screws .
STEP 6
STEP 5
5
5
5
5
9
10
E5
9
5
Back
Back
Back
Front
Front
Allen key Qty 1
Screw
M4x6.29" Qty 4
AE
Allen key Qty 1
Screw
M4x6.29" Qty 6
AE

E
Assemble cable
management box in
between cable management
brackets and using
screws .
With help, carefully turn the
desk over into the standing
position.
Warning! The desk is
heavy. Lift with care.
Clip leg covers to legs as
shown.
STEP 8
STEP 7
Back
Front
Allen key Qty 1
Screw
M4x6.29" Qty 4
AEEEE
10
11
11
11
9
9
8
8
8
10
10
11
11

Assemble LED side
extensions and at
each side of the desk top
using screws .
Connect cable in between
LED side extensions as
show.
Use cable tie to support
cable .
Stick decals and to
legs as shown.
Place Mouse Pad into
position.
STEP 9
Back
JJJJHHEEE
15
15
15
14
14
16
16
17
17
18
18
Allen key Qty 1
Screw
M4x6.29" Qty 16
AE
Cable tie Qty 5
HJ
LED cable Qty 1

Button M (means Mode)
Press M once to turn RGB light on
Press M twice to enter special volume
control mode
Press M three times to turn RGB light off
Press C to scroll through light colour options
Button C (means Colour switch)
Locate Phone Holders
and Pen Holder as
required.
STEP 10
9
FFGG
Phone holder
Qty 7 Pen holder Qty 1
FGFG

10