modway EEI-2936 User manual

︱ Page 1 of 3
EEI–2936 OTTOMAN
Hardware:
Component:
A Bolt M8x40mm
x 4
Thank you for purchasing the MODWAY OTTOMAN!
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the ottoman, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
B
Allen Wrench M5 x 1
Customer Service 908-368-1025 www.modwayfurniture.com
1. Seat Frame x1
2. Left Frame x1
3. Right Frame x1
4. Cushion x1
1
2
3
4

Customer Service 908-368-1025 www.modwayfurniture.com
STEP 1:
STEP 2:
Please put Left Frame (2) on a carpeted or padded area.
Insert the tenon on Seat Frame (1) into the rabbet on Left Frame (2) at first.
Insert wooden bar or Chair Back (1) one by one through drilling hole.
Carefully position Right Frame (3) to the assembled Seat Frame (1) and Left Frame (2) as shown.
Insert the tenon on Seat Frame (1) and Left Frame (2) into the rabbet on Right Frame (3).
Page 2 of 3
EEI–2936 OTTOMAN
2
1
2
1
3
Ax4 Bx1
Carefully turn over the assembled Seat Frame (1), Left Frame (2) and Right Frame (3).
Insert 2 pieces of Bolt (A) into the pre-drilled holes on Seat Frame (1) through the top pre-drilled holes on Left
Frame (2).
Use Allen Wrench (B) to tighten Bolts (A) clockwise until secure.
Repeat the same steps for Right Frame (3).
A
A
A
A
B
A
Hardware & Tool required

Customer Service 908-368-1025 www.modwayfurniture.com
STEP 3:
4
Assembly is complete. Your ottoman is ready to be used now!
Page 3 of 3
EEI–2936 OTTOMAN
Carefully position the assembled ottoman to the desired location.
Put Cushion (4) into the assembled ottoman as shown.