Foscam FosBaby P1 User manual

Wi-Fi Light Description
O No Wi-Fi connection
Flashing every 0.1 seconds Soft AP takes eect
Flashing every 0.2 seconds EZLink takes eect (default)
Flashing every 0.4 seconds WPS is connecting
Slow Flash every 1.0 second Wi-Fi connected
1.1Physical Description
Please Note:
If required, the camera can also be powered using portable
or mobile power sources. We suggest an output of 5V/2A
and a capacity of 5000 mAH. Under ideal conditions
this will provide about 5 hours of use.
We do not recommend the use of a PC or Laptop power
source due to their insucient current strength. Use of these
power supplies may result in damage or inconsistent
functioning of your camera.
Before you continue, please note:
Make sure your smartphone is located near the camera.
Your smartphone should be connected to the same WiFi
network as your camera.
Please use a wireless connection for Fosbaby series camera.
After the camera is powered, it will play voice prompts
”Ready for WiFi conguration” .
After plugging the Fosbaby P1 to the power supply, the
FosBaby P1 will automatically run, cruise startup
(Fosbaby P1
only).
Lens
Microphone
Soft AP
WPS / Reset
WPS/Reset
SoftAP
Please Note:
If you used snapshot by the remote control, the default storage
path of snapshot les are FTP server and SD card.
Remote Control Description:
One Key Alert on
One Key Alert o
Speaker Volume Up
Speaker Volume Down
Left control
Snapshot
Night Lamp
Play/Stop Lullabies
Up Control
Right Control
Down Control
WPS
Wireless Router
STRANGULATION
HAZARD!
ChildrenhaveSTRANGLED
incords.Keepthis cord out
ofthereachof children
(morethan3ft(0.9m)away).
Donotremovethis tag.
WARNING:
Power
Speaker
Temperature & Humidity
Detection Sensor
Night Lamp
Micro-SD Card Slot
Wi-Fi & System
Status Light
STRANGULATION
HAZARD!
Childrenhave
STRANGLED
incords.Keepthiscord out
ofthereachofchildren
(morethan3ft(0.9m)away).
Donotremovethistag.
WARNING:
Warning Sticker
Wi-Fi Status Light
V1.9
EQFB0015
Quick Installation Guide
Wireless HD Baby Monitor
FosBaby FosBaby P1
"Foscam" App download
Lens
Microphone
Soft AP
WPS / Reset
STRANGULATION
HAZARD!
Childrenhave
STRANGLED
incords.Keepthiscord out
ofthereachofchildren
(morethan3ft(0.9m)away).
Donotremovethistag.
WARNING:
Temperature Detection
Sensor
Speaker
Micro-SD Card Slot
Power
Power
Wi-Fi Status Light
Warning Sticker
Wireless Router
WPS
FosBaby
FosBaby P1
1Hardware Introduction
Package Contents
Power Adapter
Mounting Bracket
IP Camera
USB Power Cable Remote Control
(Fosbaby P1 only)
Watch strap
Temperature Detection
Sensor
Quick Installation Guide CD-ROM
Warranty Card Warning Sticker
QuickInstallation Guide
HDWirelessBaby Monitor
FosBaby FosBabyP1
"Foscam"Appdownload
Security Warning
Foscam cameras and NVRs require good security practices
to safeguard your privacy. You should regularly change
your camera or NVR password which is 8-10 numbers,
letters, symbols combination.
You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest rmware installed
for your specic model and better experience.

5Technical Support
1.2Hardware Installation 2Add the IP Camera 3Access the IP Camera 4FAQ
Forgot Username / Password
Restore camera back to factory settings:
1. Press and hold the "Reset" button on the camera for about 10
seconds with the camera powered on, and then release.
2. Once the button is released, wait about 30 seconds, and the
camera will automatically restart and restore itself to its
factory settings. The username and password will be set to
the default name and password.
Please Note:
After restoring to factory default settings, you need to
re-congure the Wi-Fi connection. You can follow the
Setup Wizard of the App to congure your WiFi connection
again.
If your device fails to connect to the Wi-Fi using the Setup
Wizard, you can also use WPS mode or the Soft AP connection.
Please refer to the User Manual on the Foscam website at
http://www.foscam.com .
You can add the Foscam IP Camera using a Smartphone.
1. Download the App
If you have a QR Code App on your phone, scan the code
below.
Run the App, and then register for a Foscam account.
Once logged in, you can tap the "+" button on the App and
follow the setup wizard to add your camera.
2. Add the IP Camera
If you do not have a QR code app on your phone, you can
simply go to the App Store or Google Play Store and search
the term "Foscam". Find the app that appears with the
same icon as shown above, and download it to your device.
Ensure that you download the App created by our
ShenZhen Foscam Intelligent Technology Co. LTD.
Please Note:
You can also access your Foscam camera via our P2P web
portal: https://www.myfoscam.com on your Windows PC using
Internet Explorer.
If you have registered and added the IP Camera on the
Foscam App, you don't have to register again. Rather, just log
in and access the camera directly via the app or browser.
As an alternative to accessing the camera via the P2P web
portal, you can access the camera directly through the local
network and remotely via port forwarding. Please download
the "Equipment Search Tool" from http://www.foscam.com.
Place the camera directly on a
desk. (nomounting bracket
equired)
Install your camera on the
wall. (with the supplied
mounting bracket) If you have problems with your Foscam IP Camera, please
contact the Foscam reseller who you purchased your carema
from, Alternatively you can e-mail the Foscam’s technical
support team: [email protected].
Your valuable comments and suggestions on improving Foscam
products are welcomed!
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
If the Wi-Fi connection is successful, the camera will play
voice prompts.
Take advantage of our provided watch strap for easy fastening!
The strap will allow you to fasten your camera in an otherwise
challenging location (i.e. Crib, Wall bracket, etc.).
Please note:
The camera should always be fastened out of your child’s reach.