Foscam FI9803P User manual

1 Hardware Introduction 1. Install wireless antenna and position upright.
2. Connect the power adapter to the camera.
3. Turn on your wireless router.
WPS
2Access the IP Camera
by Smart Phone
Before you start, please note:
Make sure your smartphone is located near the camera.
Do not use an ethernet cable to connect the camera if you
want to use a wireless connection.
Make sure your smartphone is connected to your wireless
router.
1.
Download and install the latest Foscam App named Foscam.
Two ways:
Scan the QR code of the front cover of the Quick Installation
Guide. This will take you to the download page to install the
Foscam APP.
The App icon will be displayed after successful installation:
Go to App Store or Google Play store to search “Foscam” by
Foscam, download and install Foscam App.
Please Note:
You may be directed to a link for both iOS/Android after you
have scanned the QR code. Simply click on the correct link to be
directed to the relevant App store.
Quick Installation Guide
Outdoor HD P2P IP Camera
"Foscam" App download
★Physical Description
Hardware Connection
★
LAN
Audio in/out
Power
Reset Button
Antenna
Induction IC
LENS
Infrared Lamp Array
Model: FI9803P
Foscam Digital Technologies
Quick Installation Guide
Outdoor HD P2P IP Camera
Model: FI9803P
Foscam Digital Technologies
Security Warning
You should update your camera regularly at
http://www.foscam.us/firmware.html. Make sure your
camera has the latest firmware installed for your
specific camera model.
Foscam cameras require good security practices to
safeguard your privacy. You can help protect your
camera by changing the default username and/or
Package Contents
Quick Installation Guide
Resource CD
Ethernet Cable
Power Adapter
Mounting Bracket
IP Camera
Security Warning Card
Wi-Fi Antenna
V1.1
EE200519

. 264
3. Now that you have logged in to your Foscam Could account
you can add your camera. Press the “Add camera” button and
follow on screen prompts to scan the QR Code, this is located on
the bottom of your camera.
3FAQ
2. Once you have successfully installed the Foscam App,
launch the App and login to the Foscam Cloud. If you do not
have an account, please select “Sign up”to create your account.
After scanning the camera QR code, the QR Code UID should
now be auto populated. Follow the steps below to connect your
camera to your wireless network.
Success: The camera has
been added successfully.
Fail: Please confirm the
password of wireless router or
camera, and then re-add.
Forget Username / Password
Restore your camera back to factory settings:
1. Press "Reset" button for about 10 seconds with camera
energized.
2. Release the button and wait about 30 seconds. The camera
will automatically restart and be restore to factory settings with
its username / password set to admin / (blank ). (you will need
to re-connect your Wi-Fi).
Please Note:
After restoring the camera to factory default settings, the
default connection is EZLink mode.
In case your device failed to add via EZLink mode, you can
use wired connection. Please refer to the User Manual on
the CD .
★
a. The Camera default username
is admin and there is no
password .
b. Enter a new secure password.
c. Enter the Password of your
wireless router.
d. Click "CONNECT".
4. After your camera is added successfully, you can access it any
where and any time via App or Foscam Cloud Service.
Foscam Digital Technologies
www.foscam.us www.foscam.ca www.foscam.co.uk
www.foscamgroup.com www.foscam.com
We hope your experience with the Foscam IP camera is enjoyable
and easy to use. If you experience any issues or have any
questions that this Quick Installation Guide has not answered,
please contact our support department via the websites listed
below 24 hours a day, 7 days a week.
4 Technical Support