Foscam FI9851P Installation and operation manual

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com 1
Upgrade Guide for FI9851P
This firmware is for camera FI9851P, you can check camera model on the
bottom sticker. Updating with the wrong firmware could severely damage and/or
break your camera. Please make sure the firmware is correct.
Note:
System firmware 1.5.1.11, App firmware 2.24.1.10 can upgrade to this version;
Preparation before upgrading
Upgrade App Firmware
Preparation before upgrading:
1. Please restart your camera before the upgrading;
2. Connect camera to router with an Ethernet cable before upgrading;
3. DO NOT upgrade firmware via wireless;
4. DO NOT upgrade firmware over internet, just finish it in LAN;
5. Keep power on during the upgrading;
6. Logging your camera as administrator first, upgrade firmware on web page.
Upgrade the app firmware version:
Step 1: Login your FI9851W, go to Settings System System Upgrade.
Click Download the latest firmware button to download the new firmware and
extract the zip package onto your desktop.
Step 2: Click Browse choose FosIPC_B_app_ver2.x.1.12.bin click Open
Click System Upgrade.

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com 2
Step 3: “Upgrading, do not power off … Xs” pop up, camera IP will disappear
from the IP Camera Tool. Then camera will reboot itself, DO NOT power off the
camera, please wait till the camera IP reappear in the IP Camera Tool.
Step 4: Login your camera again to check the System Firmware Version,
Application Firmware Version and Plug-In Version.
Congratulations, your camera successfully upgraded to the latest firmware!

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com 3
Note:
1. You’d better re-install the plug-in, in case it did not upgraded.
2. The correct firmware version after upgrade:
End
--- by Foscam Technical Support Team