foxunhd FX-EX21B User manual

Operating Instructions
www.foxunhd.com
FX-EX21B
50m HDMI Extender over single Cat5e/6 cable,with Bi-directional
wide-band IR,EDID
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
EDID
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
Allows HDMI Audio/Video Signals and IR to be transmitted over a 50m single Cat5e/6 cable
Transmit a wide-band(38k-56kHz)Bi-Directional IR control signal together with the HDMI signal.
Support 24bit deep color
Automatically adjusts feedback,equalization and amplification
EDID DIP switch on transmitter to enhance EDID communication between sources and displays
Support PCM,Dolby Digital and DTS Digital surround
Follows IEEE-568B cable termination standards
Support 3D.
Power consumption:4W
Size:TX(LxWxH):127.1x70.6x28.2mm, RX(LxWxH):85x65x24mm
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
SPECIFICATIONS
Operating Temperature Range
-5 to +65℃(+23 to +149℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Data transfer speed
6.75Gbps
Connectors on Transmitter
HDMI Receptacle x 2 (1xHDMI input, 1xHDMI loop output)
RJ45 Receptacle x 1
Power DC Receptacle x 1
IR Receptacle x 2(for IR TX and RX cable)
Connectors on Receiver
HDMI Receptacle x 1
RJ45 Receptacle x 1
Power DC Receptacle x 1
IR Receptacle x 2(for IR TX and RX cable)
Resolution outputs
1080p/1080i/720p/576p/480p
Audio format supported
DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc
Output Video Signal
HDMI

Operating Instructions
www.foxunhd.com
Dimension (L×W×H)
TX: L127.1xW70.6xH28.2mm
RX: L85xW65xH24mm
Power supply
DC 5V Power supply
Transmission Distance
1080p up to 50m(1)
IR wavelength & frequency
Wavelength: 940nm IR Frequency: 38KHz - 56KHz
Power consumption
4W(MAX)
Size(LxWxH)
TX:127.1x70.6x28.2mm; RX:85x65x24mm
Net Weight
319g (1 Pair)
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1）FX-EX21B (TX&RX)
2）2 x IR TX Emitter
3）2x IR RX Receiver
4）2x5V/1A DC Adapter
5）1xUser Manual
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION
FX-EX21B-TX
1 ) Status of signal connection when this works well,the LED lights
2) Status of signal connection when power input on ,the LED lights
3) Cat5e/6 output

Operating Instructions
www.foxunhd.com
4) IR-TX
5) IR-RX
6) DV5V,power input
7) HDMI input
8) EDID switch(adjust EDID to ensure better compatibility)
FX-EX21B-RX
1 ) Status of signal connection when this works well,the LED lights
2) Status of signal connection when power input on ,the LED lights
3) Cat5e/6 input
4) IR-TX
5) IR-RX
6) DV5V,power input
7) HDMI output
CONNECT AND OPERATE
1) Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on
the transmitter
2) Connect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver .
3) Connect a single Category 5e/6/7 up to (50m) to both transmitter and receiver.
4) Plug in the IR-RX cable and IR-TX cable to the IR jack port located on the Receiver and
transmitter balun.
5) Power on the transmitter and receiver firstly, then power on the source and sink.
6) DIP switch Description

Operating Instructions
www.foxunhd.com
Attention: 1) Insert/Extract cable gently.
2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable
only when power is off.
EDID for Transmitter
Position
Functions
0
HDMI 1080P 2CH
1
HDMI 1080P 5.1CH
2
HDMI 1080P 7.1CH
3
HDMI 1080P 3D 2CH
4
HDMI 1080P 3D 5.1CH
5
HDMI 1080P 3D 7.1CH
6
Reserved
7
Reserved
Note :The distance is 40m under 5.1CH or 7.1CH
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.

Operating Instructions
www.foxunhd.com
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.