foxunhd FX-EX22 User manual

Operating Instructions
www.foxunhd.com
FX-EX22
120m HDMI Extender over IP
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
Uses off-the-shelf gigabit IP switches for extension and distribution
Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth
loading
Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
With IR Control function ,it allows you control back the source at the end of destination
Can be cascaded for many layers by adding Ethernet switches
DC 5V/1A x2 PCS Power Supply.
Power Consumption：TX:3watts;RX:3watts
Dimension (L×W×H):103.5x93.5x24.6mm
Net Weight:Receiver:220g,Transmitter:220g
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
SPECIFICATIONS
Operating Temperature Range
-5 to +65℃(+23 to +149℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Video Signal
0.5-1.0 Volts P-P
Input DDC Signal
5 volts p-p(TTL)
Support Video Format
DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P
Video Output
HDMI
Transmission Distance
1080P 8-bit 120m over single CAT5E/6 /24AWG/Solid
Power consumption
TX:3watts;RX:3watts
IR frequency
38kHz-56kHz
Dimension (L×W×H)
103.5x93.5x24.6mm
Net Weight
Receiver:220g,Transmitter:220g
TX
Default IP address:192.168.168.55
MAC address:00:0b:78:00:60:01
RX
Default IP address:192.168.168.56
MAC address:00:0b:78:00:60:02

Operating Instructions
www.foxunhd.com
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) Main Unit. Transmitter & Receiver
2) Power adapter DC 5V/1A x2 PCS
3) IR-TX cable & IR-RX cable
4) Operating Instructions
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION
Transmitter Panel
1) Ethernet port
2) Indicator of power input
3) Status of signal connection
4) HDMI input

Operating Instructions
www.foxunhd.com
5) IR-TX port
6) Reset button
7) Power input port
RX
1) Ethernet port
2) Indicator of power input
3) Status of signal connection
4) HDMI output
5) IR-RX port
6) Reset button
7) Power input port
CONNECT AND OPERATE
1) Connect the HDMI signal sources (Such as DVD, STB etc) to HDMI Transmitter.
2) Connect CAT5e or 6 cables to both the Ethernet of the transmitter and Ethernet port of the Receiver.
(The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.

Operating Instructions
www.foxunhd.com
4) Connect the power supply into Power port.
5) Connect the IR TX receiving cables into IR TX port on the back panel and affix the emitter onto the
source IR windows.
6) Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of site
Typical Application
1) One to One
2）One to More
3）More to more

Operating Instructions
www.foxunhd.com
4）Lan Connection
Attention: 1) Insert/Extract cable gently.
2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable

Operating Instructions
www.foxunhd.com
only when power is off.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for

Operating Instructions
www.foxunhd.com
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.