foxunhd FX-EX44 User manual

Operating Instructions
www.foxunhd.com
FX-EX44
100M HDBaseT Extender
With Audio Embedded,Audio Extraciton POC,Ethernet
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
1)Incorporate HDBaseT technology
2) Transmit up to 100m under the 1080P and up to 70m under 4K
3) HDCP2.2/1.4 compliant
4) Support 3D
5) Support dual POC(Receiver powered by transmitter or transmitter powered
by Receiver)
6) Support RS232, Ethernet pass through
7) Support Wide-band Bi-dircetional IR (38KHz to 56 KHz)
8) Input audio: SPDIF 5.1 and L/R Analog Audio Embedded at transmitter
9) Output audio: SPDIF 5.1 and L/R Stereo Analog Audio Extraction
at receiver
10) Power Supply DC24V
11) Power Consumption：13 watts
12) Dimension (L×W×H):TX/RX:152.2×112.4×28mm
13) Net Weight:TX:459.2g ;RX:464.5g
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
SPECIFICATIONS

Operating Instructions
www.foxunhd.com
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) Main Unit: HDMI Extender( Transmitter& Receiver)
2) Power Adapter DC 24V/1A
3) 2xIR TX unit(IR emitter cable,1 pcs for TX,1 PCS for RX)
4) 2xIR unit (IR receiver cable,1 Pcs for TX,1 PCS or for RX)
5) 2xPhoenix plugs for RS232 cable termination
6) 1x User’s Manual
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION
EX44-TX front panel
Operating Temperature Range
-5 to +35℃(+23 to +95℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Video Format Supported
4K@60Hz(YUV4:2:0 8bit),4K@30Hz
1080P/1080i/720P/576P/480P/576i/480i
Output Video
HDCP1.4/2.2
Output Audio
Dolby True HD, DTS-HD Master Audio
IR Frequency
38-56KHz
RS232 Baud rate
Up to 115200bps
Maximum Transmission Distance
100 meters for 1080P, 70 meters for 4K
Power consumption
13W
Dimension (L×W×H)
TX/RX: L152.2xW112.4xH28mm
Net Weight
Transmitter:459.2g ; Receiver:464.5g

Operating Instructions
www.foxunhd.com
①USB port ②Indicator of system run
③Audio Button/Reset ④RS232port
⑤Indicator of Analog Audio Input ⑥Analog Audio In port
⑦Indicator of SDPIF input ⑧SDPIF in port
Note:1) Audio input is from HDMI by default,first press to switch to SPDIF Audio input and indicator⑦will
light up,second press to switch to Analog audio input and indicator⑤will light up
2) Press for 3 seconds for Reset
Back Panel
①Power input ②IR-In
③IR-Out ④Indicator of HDBaseT Link
⑤HDBaseT out port ⑥Indicator of Extender system run
⑦HDMI In port ⑧Indicator of HDMI In
⑨Ethernet port
EX44-RX front Panel
①USB port ②Indicator of system run

Operating Instructions
www.foxunhd.com
③Audio Button/Reset ④RS232 port
⑤Indicator of Analog Audio Output ⑥Analog Audio Out port
⑦Indicator of SDPIF Output ⑧SDPIF Out port
Note:1) Audio input is from HDMI by default,first press to switch to SPDIF Audio input and indicator⑦will
light up,second press to switch to Analog audio input and indicator⑤will light up
3) Press for 3 seconds for Reset
Back Panel
①Power input ②IR-In
③IR-Out ④Indicator of HDBaseT Link
⑤HDBaseT In port ⑥Indicator of Extender system run
⑦HDMI Out port ⑧Indicator of HDMI Out
⑨Ethernet port
CONNECT AND OPERATE
Application :
1) Connect the HDMI input source (such as HD-DVD, PS3, STB etc.) to TX.
2) Connect a CAT-5E/6E cable from HDBaseT output of TX to HDBaseT input
of RX.

Operating Instructions
www.foxunhd.com
3) Connect the HDMI sink (such as HD-LCD、HD-DLP) to RX.
4) Connect the IR TX UNIT into IR-Out port of the Transmitter; Connect the IR
RX UNIT into IR-In port of the Receiver.
5) Connect the IR RX UNIT into IR-In port of the Transmitter; Connect the IR TX
UNIT into IR-Out port of the Receiver.
6) Connect the 24V power supply into Transmitter or Receiver.
Attention: 1) Insert/Extract cable gently.
2) Please connect HDBaseT out and HDBaseT in by one Cat5e/6
cable, please don’t connect HDBaseT port with Ethernet, doing so will damage your unit !
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company

Operating Instructions
www.foxunhd.com
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.