Foxwell ET6842 User manual

1
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
Trademarks
FOXWELL is trademark of Shenzhen Foxwell Technology Co., Ltd.
All other marks are trademarks or registered trademarks of their respective
holders.
Copyright Information
©2020 Shenzhen Foxwell Technology Co., Ltd.
All rights reserved.
Disclaimer
The information, specifications and illustrations in this manual are based on the
latest information available at the time of printing.
Foxwell reserves the right to make changes at any time without notice.
Visit our website at
www.endeavourtools.com.au
For Technical Assistance, send us email at
[e-mail]

2
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
Two-Year Limited Warranty
Subject to the conditions of this limited warranty, Shenzhen Foxwell
Technology Co., Ltd (“FOXWELL”) warrants its customer that this product is
free of defects in material and workmanship at the time of its original purchase
for a subsequent period of two (2) year.
In the event this product fails to operate under normal use, during the warranty
period, due to defects in materials and workmanship, FOXWELL will, at its
sole option, either repair or replace the product in accordance with the terms
and conditions stipulated herein.
Terms and Conditions
1 If FOXWELL repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period. No charge will be made to the customer for replacement parts or labor
charges incurred by FOXWELL in repairing or replacing the defective parts.
2 The customer shall have no coverage or benefits under this limited warranty
if any of the following conditions are applicable:
a) The product has been subjected to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized repair, misuse, neglect abuse, accident,
alteration, improper installation, or other acts which are not the fault of
FOXWELL, including damage caused by shipping.
b) The Product has been damaged from external causes such as collision with
an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or
damage from exposure to weather conditions, an Act of God, or battery
leakage, theft, blown fuse, improper use of any electrical source, or the
product was used in combination or connection with other product,
attachments, supplies or consumables not manufactured or distributed by
FOXWELL.
3 The customer shall bear the cost of shipping the product to FOXWELL. And
FOXWELL shall bear the cost of shipping the product back to the customer
after the completion of service under this limited warranty.
4 FOXWELL does not warrant uninterrupted or error-free operation of the
product. If a problem develops during the limited warranty period, the
consumer shall take the following step-by-step procedure:

3
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
a) The customer shall return the product to the place of purchase for repair or
replacement processing, contact your local FOXWELL distributor or visit our
website www.endeavourtools.com.au to get further information.
b) The customer shall include a return address, daytime phone number and/or
fax number, complete description of the problem and original invoice
specifying date of purchase and serial number.
c) The customer will be billed for any parts or labor charges not covered by
this limited warranty.
d) FOXWELL will repair the Product under the limited warranty within 30 days
after receipt of the product. If FOXWELL cannot perform repairs covered
under this limited warranty within 30 days, or after a reasonable number of
attempts to repair the same defect, FOXWELL at its option, will provide a
replacement product or refund the purchase price of the product less a
reasonable amount for usage.
e) If the product is returned during the limited warranty period, but the problem
with the product is not covered under the terms and conditions of this limited
warranty, the customer will be notified and given an estimate of the charges
the customer must pay to have the product repaired, with all shipping charges
billed to the customer. If the estimate is refused, the product will be returned
freight collect. If the product is returned after the expiration of the limited
warranty period, FOXWELL’ normal service policies shall apply and the
customer will be responsible for all shipping charges.
5 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE
DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY.
OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE
CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED. FOXWELL SHALL NOT
BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED
BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF
DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY
ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY
SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF
ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO
PROPERTY, RESULTING FROM THE PURC HASE OR USE OF THE
PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH

4
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL
OR EQUITABLE THEORY, EVEN IF FOXWELL KNEW OF THE
LIKELIHOOD OF SUCH DAMAGES. FOXWELL SHALL NOT BE LIABLE
FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY,
OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING
REPAIRED.
6. Some states do not allow limitation of how long an implied warranty lasts,
so the one-year warranty limitation may not apply to you (the Consumer).
Some states do not allow the exclusion or limitation of incidental and
consequential damages, so certain of the above limitations or exclusions may
not apply to you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other rights which vary
from state to state.

5
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
Safety Information
For your own safety and the safety of others, and to prevent damage to the
equipment and vehicles, read this manual thoroughly before operating your
tool. The safety messages presented below and throughout this user’s
manual are reminders to the operator to exercise extreme care when using
this device. Always refer to and follow safety messages and test procedures
provided by vehicle manufacturer. Read, understand and follow all safety
messages and instructions in this manual.
Safety Message Conventions Used
We provide safety messages to help prevent personal injury and equipment
damage. Below are signal words we used to indicate the hazard level in a
condition.
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, may result in
moderate or minor injury to the operator or to bystanders.
Important Safety Instructions
And always use your tool as described in the user’s manual, and follow all
safety messages.
● Do not route the test cable in a manner that would interfere with driving
controls.

6
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
● Do not exceed voltage limits between inputs specified in this user’s manual.
● Always wear ANSI approved goggles to protect your eyes from propelled
objects as well as hot or caustic liquids.
● Fuel, oil vapors, hot steam, hot toxic exhaust gases, acid, refrigerant and
other debris produced by a malfunction engine can cause serious injury or
death. Do not use the tool in areas where explosive vapor may collect, such
as in below-ground pits, confined areas, or areas that are less than 18 inches
(45 cm) above the floor.
● Do not smoke, strike a match, or cause a spark near the vehicle while
testing and keep all sparks, heated items and open flames away from the
battery and fuel / fuel vapors as they are highly flammable.
● Keep a dry chemical fire extinguisher suitable for gasoline, chemical and
electrical fires in work area.
● Always be aware of rotating parts that move at high speed when an engine
is running and keep a safe distance from these parts as well as other
potentially moving objects to avoid serious injury.
● Do not touch engine components that get very hot when an engine is
running to avoid severe burns.
● Block drive wheels before testing with engine running. Put the transmission
in park (for automatic transmission) or neutral (for manual transmission). And
never leave a running engine unattended.
● Do not wear jewelry or loose fitting clothing when working on engine.

7
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
Table of Contents
TWO-YEAR LIMITED WARRANTY....................................................................................................2
SAFETY INFORMATION....................................................................................................................5
SAFETY MESSAGE CONVENTIONS USED .....................................................................................5
IMPORTANT SAFETY INSTRUCTIONS............................................................................................5
1 USING THIS MANUAL..................................................................................................................10
1.1 BOLD TEXT ...............................................................................................................................10
1.2 SYMBOLS AND ICONS.................................................................................................................10
1.2.1 Solid Spot ........................................................................................................................10
1.2.2 Arrow Icon........................................................................................................................10
1.2.3 Note and Important Message...........................................................................................11
2 INTRODUCTION ...........................................................................................................................11
2.1 SCANNER DESCRIPTIONS ...........................................................................................................12
2.2 VCI DONGLE DESCRIPTIONS ......................................................................................................14
2.3 ACCESSORIES...........................................................................................................................16
2.4 TECHNICAL SPECIFICATIONS.......................................................................................................17
3 GETTING STARTED.....................................................................................................................17
3.1 POWERING UP THE SCANNER .....................................................................................................18
3.1.1 Internal Battery Pack........................................................................................................18
3.1.2 External Power Supply.....................................................................................................18
3.2 SHUTTING DOWN THE SCANNER .................................................................................................18
3.3 ESTABLISHING VEHICLE COMMUNICATION....................................................................................19
3.3.1 VCI Connection................................................................................................................20
3.3.1.1 Bluetooth Communication........................................................................................20
3.3.1.2 USB Communication................................................................................................22
3.4 SCREEN LAYOUT OF HOME SCREEN............................................................................................22
3.4.1 Application Menu..............................................................................................................23
3.4.2 Navigation Toolbar...........................................................................................................24
3.4.3 Diagnostic Menu ..............................................................................................................25
4 VEHICLE IDENTIFICATION..........................................................................................................26
4.1 VIN READING............................................................................................................................26
4.1.1 Automatic Read................................................................................................................27
4.1.2 Scan VIN..........................................................................................................................28

8
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
4.1.2.1 Scan VIN Plate ........................................................................................................28
4.1.2.2 Scan Barcode/QR Code of VIN................................................................................30
4.1.2.3 Photo Recognition....................................................................................................31
4.1.3 Manual Entry....................................................................................................................33
4.2 MANUAL SELECTION ..................................................................................................................33
4.2.1 Smart VIN........................................................................................................................34
4.2.2 Manual Vehicle Selection.................................................................................................35
4.3 VEHICLE HISTORY......................................................................................................................36
5 DIAGNOSIS ..................................................................................................................................37
5.1 CONTROL MODULE SELECTION...................................................................................................38
5.1.1 Quick Scan.......................................................................................................................39
5.1.2 Control Modules...............................................................................................................41
5.2 DIAGNOSTIC OPERATIONS..........................................................................................................42
5.2.1 Read Codes.....................................................................................................................43
5.2.2 Clear Codes.....................................................................................................................45
5.2.3 Live Data..........................................................................................................................46
5.2.3.1 All Data....................................................................................................................47
5.2.3.2 Custom List..............................................................................................................51
5.2.4 ECU Information...............................................................................................................52
5.2.5 Active Tests .....................................................................................................................53
5.2.6 Special Functions.............................................................................................................55
5.3 SPECIAL FUNCTIONS..................................................................................................................55
5.3.1 Service.............................................................................................................................55
5.3.2 Coding and Programming ................................................................................................56
5.3.3 Hot Functions...................................................................................................................58
6 MAINTENANCE ............................................................................................................................59
6.1 OIL LIGHT RESET.......................................................................................................................60
6.2 ELECTRONIC PARKING BRAKE (EPB) SERVICE ............................................................................61
6.3 BATTERY REPLACEMENT (BRT)..................................................................................................62
6.4 DIESEL PARTICULATE FILTER (DPF) REGENERATION ...................................................................63
6.5 THROTTLE BODY ALIGNMENT (TPS/TBA)....................................................................................64
6.6 STEERING ANGLE SENSOR (SAS) CALIBRATION...........................................................................64
6.7 CONTINUOUS VARIABLE TRANSMISSION (CVT) ............................................................................64
6.8 GEAR LEARNING........................................................................................................................64
6.9 TIRE PRESSURE MONITORING SYSTEM PROGRAMMING ................................................................65
6.10 ODOMETER .............................................................................................................................65
6.11 INJECTOR CODING...................................................................................................................65
6.12 ABS BLEEDING .......................................................................................................................65
6.13 KEY PROGRAMMING/IMMOBILIZER.............................................................................................65

9
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
7 DATA MANAGER .........................................................................................................................66
7.1 IMAGE.......................................................................................................................................66
7.1.1 How to Save an Image.....................................................................................................66
7.1.2 Review Image..................................................................................................................67
7.2 REPORTS..................................................................................................................................69
7.2.1 How to Create a Report....................................................................................................69
7.2.2 Review Reports................................................................................................................70
7.3 DATA PLAYBACK........................................................................................................................70
7.4 DATA LOGGING &DATA RECORD................................................................................................72
8 VCI MANAGER.............................................................................................................................73
8.1 BLUETOOTH ..............................................................................................................................74
8.2 UPDATE FIRMWARE ...................................................................................................................74
8.3 UNBIND A VCI DONGLE...............................................................................................................75
9 REGISTRATION AND UPDATE....................................................................................................77
9.1 REGISTRATION REGISTER WITH BUILT-IN UPDATE CLIENT.............................................................78
9.2 UPDATE....................................................................................................................................80
10 SETTINGS...................................................................................................................................81
10.1 CHANGE UNITS........................................................................................................................82
10.2 LANGUAGE..............................................................................................................................82
10.3 FONT SIZE ..............................................................................................................................83
10.4 PUSH MESSAGE ......................................................................................................................83
10.5 AUTOMATIC UPDATE ................................................................................................................84
10.6 SYSTEM SETTINGS...................................................................................................................84
10.7 GENERAL................................................................................................................................85
10.8 UNINSTALL VEHICLE SOFTWARE ...............................................................................................85
10.9 PRINT SETTINGS......................................................................................................................86
10.10 ABOUT..................................................................................................................................88
11 SHOP MANAGER.......................................................................................................................89
11.1 VEHICLE HISTORY....................................................................................................................90
11.2 WORKSHOP INFORMATION........................................................................................................90
12 MY ACCOUNT ............................................................................................................................91
12.1 MY ACCOUNT..........................................................................................................................91
12.2 MY PRODUCTS........................................................................................................................92
12.3 PUSH MESSAGE ......................................................................................................................92
13 REMOTE SUPPORT ...................................................................................................................93

10
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
14 TECHNICAL DATA .....................................................................................................................94
1 Using This Manual
We provide tool usage instructions in this manual. Below are the conventions
we used in the manual.
1.1 Bold Text
Bold text is used to highlight selectable items such as buttons and menu
options.
Example:
Select Diagnostic from home screen of the i80 ET6842 application.
1.2 Symbols and Icons
1.2.1 Solid Spot
Operation tips and lists that apply to specific tool are introduced by a solid
spot ●.
Example:
When VIN hotkey is selected, a menu that lists all available options displays.
Menu options include:
●Automatic Read
●Scan VIN
●Manual Entry
1.2.2 Arrow Icon
An arrow icon indicates a procedure.
Example:

11
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
To connect to wall plug:
1. Connect the USB charge cable to scanner and plug it to the wall socket.
2. Press the power switch of the scan tool to power it on; meanwhile the
scanner tool starts charging automatically also.
1.2.3 Note and Important Message
Note
A NOTE provides helpful information such as additional explanations, tips,
and comments.
Example:
NOTE
Test results do not necessarily indicate a faulty component or system.
Important
IMPORTANT indicates a situation, which if not avoided, may result in
damage to the test equipment or vehicle.
Example:
IMPORTANT
Do not soak scanner as water might find its way into the scanner.
2 Introduction
The latest Android tablet scanner i80 ET6842 delivers faster and smarter
diagnosis for workshops and technicians. Through hardware and software
upgrades, technical staff can now approach problems with greater speed and
accuracy and produce comprehensive, professional reports.
There are two main components:
●i80 ET6842 Tablet - displays menus, test results and operation
procedures and tips
● VCI Dongle - the device that communicates with the vehicle and
transmits data the tablet

12
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
2.1 Scanner Descriptions
This section illustrates external features, ports and connectors of the
scanner.
Figure 2-1Front View
1 10’’ LED IPS Capacitive Touch Screen - shows menus, test results and
operation tips.
2Power Indicator - indicates the power status of the scanner.

13
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
Figure 2-2 Back View
3 Rear-Facing Camera - takes pictures of VIN number, faulty parts and
plates and shoots test videos.
Figure 2-3 Top View
4 VOL + / VOL - press to adjust the volume.
5 Power Port - connects to wall plug to charge the scanner.
6 Ethernet Port - connects with Ethernet cable.

14
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
7HDMI (high-definition multimedia interface) Port - outputs display of the
scanner for demonstration and training.
8 USB Port - provides USB connection with VCI dongle, oscilloscope, video
scope and other external storage devices.
9USB Type-C Port - be used to transfer data.
10 SIM Card Port - inserts SIM card.
11 TF Card Port - inserts the TF card for extra space.
12 Headset Port
13 Power Switch - turns on the scanner, goes to sleep mode or wake up the
scanner from sleep mode, press and hold for 3 seconds for emergency
shutdown.
IMPORTANT
Do not use solvents such as alcohol to clean display. Use a mild nonabrasive
detergent and a soft cotton cloth.
2.2 VCI Dongle Descriptions
i80 ET6842 connects to the vehicle and get data through the VCI dongle
either by Bluetooth or USB communication.
Figure 2-5 Front View of VCI dongle
1 Error Light - illuminates constantly when serious hardware failure occurs.
2 USB Light - turns green when the VCI dongle is properly connected and
communicating with the i80 ET6842 tablet via USB cable.
2
4
3
1

15
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
3 Bluetooth Light - turns green when the VCI dongle is properly connected
with the i80 ET6842 tablet via Bluetooth communication.
4 Power Light - turns to green when powered on.
Figure 2-6 Top View of VCI
5 Vehicle Data Connector - provides connection between vehicle and the
VCI dongle through the 16 pin diagnostic cable.
Figure 2-7 Bottom View of VCI
6 USB Port - provides USB connection between the VCI dongle and i80
ET6842 tablet.
6
5

16
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
2.3 Accessories
This section lists the accessories that go with the scanner. If you find any of
the following items missing from your package, contact your local dealer for
assistance.
Table 2-1 Accessories

17
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
2.4 Technical Specifications
Table 2-2 Technical Specifications
3 Getting Started
This section describes how to power on/off the scanner, provides brief
introductions of applications loaded on the scanner and display screen layout
of the scan tool.
Item
Description
Touch Screen
10.1’’ diagonal, daylight readable color LCD screen, 1920*1200 pixel
Operation
System
Android
Processor
RK3288 (ARM Cortex, a17x4, 1.8GHz)
Memory
2GB LPDDR3
SSD Hard drive
64GB
System Type
Android 8.1
Communication
interface
Built-in WIFI 802.11 b/g Wireless LAN
USB2.0 OTG/standard USB 2.0 HOST
Bluetooth 4.0 (10-20 m)
Camera
13 megapixels rear-facing
Built-in Battery
10000mAh, Lithium-polymer battery, chargeable via 12V/3A USB power
supply
Protocols
ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K Line
SAE-J1850 VPW, SAE-J1850PWM, CAN ISO 11898, High-speed,
Middle-speed, Lows-peed and Single wire CAN, KW81, KW82, GM
UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6,
SAE J1939, SAE J1939, SAE J1708, Fault-Tolerant CAN
Dimensions
347*200*47mm (L*W*H)

18
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
3.1 Powering up the Scanner
Before using the i80 ET6842 applications (including updating the scanner),
please make sure to provide power to the scanner.
The unit operates on any of the following sources:
●Internal Battery Pack
●External Power Supply
3.1.1 Internal Battery Pack
The i80 ET6842 tablet can be powered with the internal rechargeable battery.
The fully charged battery is capable of providing power for 6 hours of
continuous operation.
NOTE
Please turn off the tablet to save power when not use.
3.1.2 External Power Supply
The tablet can also be powered from a wall socket using the DC charge
adapter. The tablet charges its internal battery pack through charge cable.
3.2 Shutting Down the Scanner
All vehicle communication must be terminated before shutting down the
scanner. Exit the Diagnostic application before powering down.
Figure 3-1 Power-off Prompt Screen

19
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
To shut down the scanner:
1. Press and hold the Power button of the i80 ET6842 for 5 seconds.
2. Click the Power off to shut down or Reboot to restart.
3.3 Establishing Vehicle Communication
To establish communication with i80 ET6842:
1. Connect the VCI dongle to the vehicle’s DLC for both communication and
power source.
2. Connect the VCI dongle to the i80 ET6842 tablet via Bluetooth or USB
connection.
Figure 3-2 Sample Bluetooth Communication Screen

20
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
Figure 3-3 Sample USB Communication Screen
Please refer to Chapter 3.3.1.1about the details of how to connect via
Bluetooth and Chapter 3.3.1.2 about the details of how to connect via
USB cable.
3. Check the VCI Indicator status at the toolbar. If the button turns to green,
the i80 ET6842 is ready to start vehicle diagnosis.
3.3.1 VCI Connection
The VCI dongle supports two ways of communication with the i80 ET6842
tablet:
● Bluetooth Communication
● USB Communication
3.3.1.1 Bluetooth Communication
Bluetooth communication is recommended. The working range for Bluetooth
communication is about 10-20m, providing easy connection to vehicles in any
location throughout the shop.
To build Bluetooth connection:
1. Power up the tablet.
2. Go to VCI Manager and then Bluetooth. Click Connect and the VCI dongle
will connect to the tablet automatically.