Foyum TY200 User manual

More information could visit Youtube.com and search with “TY200”.
www.foyum.com

TY200 Functional description
Main Interface

1.
1.1 Frequency test
from 312Mhz-868MHz
Accurate frequency test function. One of the few devices which can test
for Citroen & for Peugeot frequency. Can distinguish ASK (Amplitude Shift
Keying) and FSK (Frequency Shift Keying) modulation modes.
When testing frequency,users press remote button to transmit signal as
shown in picture,the "yellow wave" moving at the bottom of screen
indicates that the frequency value and the modulation result are valid .

1.2 Data Detection
By this function Data Detection ,the user could be gain the information as
follow:
1st,the most important information is at the “Note”,there are Three
conditions:”Fixed”,”Hopping”,”Undefined”.We could easily judge if a
remote could be cloned.
As shown above.The remote data is a “Fixed” code,we could see the Chip
Model is :“AX5326”,The Frequency is “330”,that is enough to decide copy
it easily.
All the Fixed code could be cloned by TY200.even it have a few different
Chip Models.2260 (all manufacturers), 2262 (all manufacturers), PT2264
(all manufacturers), 5326 (all manufacturers),
527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers)
HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640,
HT6P12E, HT6P20D, 12L-4SC
PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918,
SMC908, 1416, 5211 etc.
The “Data” always shows the data,sometimes we also could use it to “Edit”
a new remote .even if a four buttons remote control broken 3 buttons.
2nd,The Note shows ”Hopping” ,usually we called “rolling code”,it has
“HCS101” and “HCS201/302” chip Model.TY200 could copy “HCS101”
code directly.
Most of “HCS201/302” code we need to select the brand in “Garage RC” or

“Car RC” of Generation Function to generate a new remote control,then
program on the receiver or OBD of cars/vehicle.When we copy it ,it may tip
that “ After the RC is copied it may not work properly It is
recommended to try RC generation.”,you need to try the RC generation.
A few of “HCS201/302” could copy without this tip,but the new remote will
with the some code and influence and affect the original remote work .So we
suggest the user take a “RC Regeneration” or Generation a new RC then
program
it.

3rd.The Note shows ”UNDEFINED” ,
It is the most difficult .There are more and more codes show this note.Be
honestly,it seems a more safe code and hard to normal copy.We only can use
TY200 to try a copy .
Warning :But we warned that do not take a try on vehicle/car
keys,especially you can not ensure you can renew it when it lost
function.most of smart car key have anti theft function.
Tip:Put the remote control against the Induction Area,Press the key and hold
on till the Interface shows the Data and Frequency totally.Do not detect that
by click key only one second ,It may shows a incomplete information .

1.3 Data comparison
When you finished clone of a fixed code remote ,you could compare the
new remote with the original remote.Could find if the key to key in right
code.
2.
Car remote clone

Support common fixed code cloning PT22XX,LX918,HT6P20.etc.
Support hundreds of vehicle and garage HCS rolling code remote cloning
and generating .
Support all TY series Universal remote.
2.2 Garage & else remote control clone
Support all TY series Universal remote.
2.3 Special code clone
2.4 HYUNDAI&KIA CLONE
2.5 SMART CAR CLONE
2.6 STEEL-MATE1 CLONE
NOTICE:2.3-2.6 There are risks in these functions.It is forbidden to copy
the VW car key ,the original smart-key, Key with chip.
Only recommend for skilled technicians/locksmiths to try.
Support all fixed code remote cloning.
Support partial special vehicle model (such as 2015 K2,K3) remote cloning
without repeated code.
Support partial vehicle non-repeated code HCS type remote direct cloning.
More information from video: TY200 multi-function
of locksmith tool make a
copy&generate garage remote
control manual&instruction
https://www.youtube.com/watch?v=sjJrptIVQZY
3.
TY200 is a Hand-held Remote Control Generate tool

3.1 Garage remote generation
TY200 multi-function device built-in dozens of garage models remote
data(increased continuously),for example the world famously brands
BFT,FAAC,NICE,DOORHAM etc.
Generated remote should be re-programmed to receiver box.
3.2 Car remote generation

TY200
multi-function device built-in more than 1200 vehicle models remote
data(increased continuously),remote pictures and match information .users
can select the relevant data file according to actual vehicle model,use TY200+
universal remote and match to the vehicle control unit by programming.
4.
4.1 Data Edit
Function:To generate a new remote control without original remote.It`s done by
2 ways:
(1) Select chip type:the data is create from the machine by their own.
Support editing PT2262,PT2240,AX5326,LX918,HT6P20*,HT12*,DOOYA
etc.
Common fixed code format date,and use TY200 Universal remote to emulate.
Support all TY series remote series.
(2) Enter remote edit:the data on the basic of reference remote
4.2 Frequency Edit
Can freely set any frequency between 300MHz to 500MHz, and can freely set