Franke FIH3210 User manual

Model：),+
Induction HobUser Manual

1. This appliance is for household use only. Do not use
outdoors.
2. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
3. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
4. Children should be supervised to ensure that they
do not play with the appliance.
5. This appliance is intended to be used in household
and similar applications such as:
- Staff kitchen areas in shops, office and other
working environments;
- farm houses;
- by clients in hotels, motels and other residential
type environments;
- In bed and breakfast type environments;
6. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
7. Please turn off and unplug the appliance before
cleaning, maintenance or relocation and whenever
it is not in use.
1. Foreword


8. This appliance as well as the cooking utensils used
and the surface of the appliance can become very
hot, do not touch the hot surface of the hob.
9. Metallic objects such as knives, forks, spoons and
lids should not be placed on the hotplate since they
can get hot.
10. That appliances are not intended to be operated by
means of an external timer or separate
remote-control system.
11. A steam cleaner is not to be used.
12. NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a
lid or a fire blanket.
13. After use, switch off the hob element by its control
and do not rely on the pan detector.
14. Disconnection incorporated in the fixed wiring is in
accordance with ASNZS 300.（Australian
requirements）15. CAUTION:The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: If the surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
WARNING: Danger of fire: do not store items on
the cooking surfaces.
WARNING: Unattended cooking on a hob with fat
or oil can be dangerous and may result in fire.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated
by the manufacturer of the appliance in the
instructions for use as suitable or hob guards
incorporated in the appliance. The use of
inappropriate guards can cause accidents.


2. Care and Cleaning
What? How? Important!
Everyday soiling
on glass
(fingerprints,
marks, stains
left by food or
non-sugary
spillovers on the
glass)
1. Switch the power to the
cooktop off.
2. Apply a cooktop cleaner while
the glass is still warm (but not
hot!)
3. Rinse and wipe dry with a clean
cloth or paper towel.
4. Switch the power to the
cooktop back on.
• When the power to the cooktop is
switched off, there will be no ‘hot
surface’ indication but the cooking
zone may still be hot! Take
extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if your cleaner or scourer is
suitable.
• Never leave cleaning residue on the
cooktop: the glass may become
stained.
Boilovers, melts,
and
hot sugary spills
on
the glass
Remove these immediately with a
fish slice, palette knife or razor
blade scraper suitable for
Induction glass cooktops, but
beware of hot cooking zone
surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at a
30° angle and scrape the
soiling or spill to a cool area of
the cooktop.
3. Clean the soiling or spill up with
a dish cloth or paper towel.
4. Follow steps 2 to 4 for Everyday
soiling on glass’ above.
• Remove stains left by melts and
sugary food or spillovers as soon as
possible. If left to cool on the glass,
they may be difficult to remove or
even permanently damage the glass
surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper is
razor-sharp. Use with extreme care
and always store safely and out of
reach of children.
Spillovers on the
touch controls
1. Switch the power to the
cooktop off.
2. Soak up the spill.
3. Wipe the touch control area
with a clean damp sponge or
cloth.
4. Wipe the area completely dry
with a paper towel.
5. Switch the power to the
cooktop back on.
• The cooktop may beep and turn
itself off, and the touch controls may
not function while there is liquid on
them. Make sure you wipe the touch
control area dry before turning the
cooktop back on.


3. Hints and Tips
Problem Possible causes What to do
The induction hob
cannot be turned on.
No power. Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you’ve checked everything and the
problem persists, call a qualified
technician.
The touch controls
are unresponsive.
The controls are locked. Unlock the controls. See section
‘Using your induction cooktop’ for
instructions.
The touch controls
are difficult to
operate.
There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls.
Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer
or
cleaning products being used.
Use cookware with flat and smooth
bases. See ‘Choosing the right
cookware’.
See ‘Care and cleaning’.
Some pans make
crackling or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is normal for cookware and
does not indicate a fault.
The induction hob
makes a low
humming noise when
used on
a high heat setting.
This is caused by the
technology
of induction cooking.
This is normal, but the noise should
quieten down or disappear
completely when you decrease the
heat setting.
Fan noise coming
from the induction
hob.
A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue
to
run even after you’ve turned
the
induction hob off.
This is normal and needs no action.
Do not switch the power to the
induction hob off at the wall while
the fan is running.


Pans do not become
hot and appears in
the display.
The induction hob cannot
detect the pan because it is not
suitable for induction cooking.
The induction hob cannot
detect the pan because it is too
small for the cooking zone or
not properly centred on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the
right cookware’.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
4. Failure Display and Inspection
The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault. Please note down the error
letters and numbers, switch
the power to the induction hob off
at the wall, and contact a
qualified technician.
The induction hob is equipped with a self diagnostic function. With this test the
technician is able to check the function of several components without
disassembling or dismounting the hob from the working surface.
Troubleshooting
Failure
code Problem Solution
Auto-Recovery
E1 Supply voltage is above the rated
voltage.
Please inspect whether power supply
is normal.
Power on after the power supply is
normal.
E2 Supply voltage is below the rated
voltage.
E3
High temperature of ceramic plate
sensor .웉1#웊Wait for the temperature of ceramic
plate return to normal.
Touch “ON/OFF” button to restart
unit.
E4
High temperature of ceramic plate
sensor .웉2#웊
E5 High temperature of IGBT .웉1#웊
Wait for the temperature of IGBT
return to normal.
Touch “ON/OFF” button to restart
unit.
Check whether the fan runs
smoothly;
if not , replace the fan.
E6 High temperature of IGBT.웉2#웊


F5/F8
Ceramic plate temperature sensor
failure—invalid . (F5 for 1#,F8
for2#)
F9/FA
Temperature sensor of the IGBT
failure.웉short circuit/open circuit for
1#웊
Replace the power board.
FC /FD
Temperature sensor of the IGBT
failure.웉short circuit/open circuit for
2#웊
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to
the induction hob.
No Auto-Recovery
F3/F6
Ceramic plate temperature sensor
failure- -short circuit. (F3 for 1#,F6
for2#) Check the connection or replace the
ceramic plate temperature sensor.
F4/F7
Ceramic plate temperature sensor
failure--open circuit. (F4 for 1#,F7
for2#)
5. Product Introduction
  7RS9LHZ
1. Max. 1500W/2000W zone
2. Max. 1200W/1500W zone
3. Glass plate
4. ON/OFF control
5. Control panel

1
3
2
4
5

  &RQWURO3DQHO
  7HFKQLFDO6SHFLILFDWLRQ
Cooking Hob FIH3210
Cooking Zones 2Zones
Supply Voltage 220-240V~ 5060Hz
Installed Electric Power 3500W
Product Size L×W×H(mm) 288X520X56
Building-in Dimensions A×B (mm) 268X500
Weight and Dimensions are approximate. Because we continually strive to improve our
products we may change specifications and designs without prior notice.
6. Operation of Product
  7RXFK&RQWUROV
xThe controls respond to touch, so you don’t need to apply any pressure.
xUse the ball of your finger, not its tip.
xYou will hear a beep each time a touch is registered.
xMake sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.
1.ON/OFF control
2. Boost control
3. Timer plus regulating control
4. Timer minus regulating control
5. Lock control
6. Power slider control
7. Power slider control



 



  &KRRVLQJWKHULJKW&RRNZDUH                     
• Only use cookware with a base suitable for induction cooking.
Look for the induction symbol on the packaging or on the bottom
of the pan.
• You can check whether your cookware is suitable by carrying out a magnet test.
Move a magnet towards the base of the pan. If it is attracted, the pan
is suitable for induction.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan
is suitable.
• Cookware made from the following materials is not suitable: pure
stainless steel, aluminium or copper without a magnetic base, glass, wood,
porcelain, ceramic, and earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the
same size as the cooking zone. Use pans whose diameter is as large as the graphic
of the zone selected. Using a pot a slightly wider energy will be used at its maximum
efficiency. If you use smaller pot efficiency could be less than expected. Pot less
than 140 mm could be undetected by the hob. Always centre your pan on the
cooking zone.
Always lift pans off the Induction hob – do not slide, or they may scratch the glass.
               


  +RZWRXVH     
  6WDUWFRRNLQJ

Touch the ON/OFF controlˈAfter power on, the buzzer
beeps once, all displays show “–” or “– –”, indicating
that the induction hob has entered the state of standby
mode.
Place a suitable pan on the cooking zone that you wish
to use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Touching the heating zone slider control ,and a
indicator next to the key will flash.
Select a heat setting by touching the slider control
• If you don’t choose a heat setting within 1 minute,
the Induction hob will automatically switch off. You will
need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
,IWKHGLVSOD\IODVKHV        DOWHUQDWHO\ZLWKWKHKHDWVHWWLQJ
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display “ ” will automatically disappear after 1 minutes if no suitable pan is placed on
it.

power up
power down

  )LQLVKFRRNLQJ

Touching the heating zone selection control that
you wish to switch off.
Turn the cooking zone off by touching the slider to
left. Make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down
to a safe temperature. It can also be used as an
energy saving function if you want to heat
further pans, use the hotplate that is still hot.
  8VLQJWKH%RRVWIXQFWLRQ
Activate the boost function
Touching the heating zone selection control

Touching the boost control , the zone indicator
show “b” and the power reach Max.
Cancel the Boost function
Touching the heating zone selection control that you
wish to cancel the boost function



Touching the "Boost" control to cancel the
Boost function, then the cooking zone will revert to
its original setting.
xThe function can work in any cooking zone.
xThe cooking zone returns to its original setting after 10 minutes.
xIf the original heat setting equals 0, it will return to 9 after 10 minutes.

  /RFNLQJWKH&RQWUROV
xYou can lock the controls to prevent unintended use (for example children accidentally
turning the cooking zones on).
xWhen the controls are locked, all the controls except the ON/OFF control are disabled.
To lock the controls
Touch and hold the Timer “ ” and Timer ”
” at the same time for a while.
The timer indicator will show “ Lo ”
To unlock the controls
Touch and hold the Timer “ ” and Timer ”  ” at the same time for a while.
When the hob is in the lock mode, all the controls are disable except the ON/OFF , you can
always turn the induction hob off with the ON/OFF control in an emergency, but you shall
unlock the hob first in the next operation.
  7LPHUFRQWURO
You can use the timer in two different ways:
xYou can use it as a minute minder. In this case, the timer will not turn any cooking zone
off when the set time is up.
xYou can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 min.


Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re
not selecting any cooking zone.
Touch “+” the controls of the timer. The minder
indicator will start flashing and “10” will show
in the timer display.
Set the time by touching the “-” or “+” control
of the timer
Hint: Touch the “-” or “+” control of the timer
once to decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer to
decrease or increase by 10 minutes.
Touching the “-” and "+” together, the timer
is cancelled, and the “00” will show in the minute
display.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows “- - “ when the setting time finished.
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone


b) Setting the timer to turn one cooking zone off
Set one zone
Touching the heating zone slider control
Set the time by touching the or control of the timer
Hint: Touch the “-“ or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+”control of the timer
will decrease or increase by 10 minutes.
Touching the “-” and “+” together, the timer is cancelled,
and the “00” will show in the minute display.
When the time is set, it will begin to count down
immediately. The display will show the remaining time and
the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
When cooking timer expires, the corresponding cooking
zone will be switched off automatically.


Other cooking zone will keep operating if they are turned on previously.
set more zones:
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant
cooking zones are on. The minute display shows the min. timer. The dot of the corresponding
zone flashes.
The shown as below:
(set to 15 minutes)
(set to 45 minutes)
Once the countdown timer expires, the
corresponding zone will switch off. Then it will
show the new min. timer and the dot of
corresponding zone will flash.
The shown as right:
(set to 30 minutes)
Touch the heating zone selection control, the corresponding timer will be shown in the timer
indicator.
c) Cancel the timer
Touching the heating zone slider control that you
want to cancel the timer
Touching the ”-“ and “+” together, the timer is
cancelled, and the ”00” will show in the minute
display.
Touch the slider control to set the timer to “00”, the timer is cancelled.
  'HIDXOWZRUNLQJWLPHV
Auto shut down is a safety protection function for your induction hob. It shut down
automatically if ever you forget to turn off your cooking. The default working times for various
power levels are shown in the below table:

Power level 1 2 3 4 5 6 7 8 9
Default working timer (hour) 8 8 8 4 4 4 2 2 2
When the pot is removed, the induction hob can stop heating immediately and the hob
automatically switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before using this unit.


7. Heat Settings
The settings below are guidelines only. The exact setting will depend on several
factors, including your cookware and the amount you are cooking. Experiment with
the induction hob to find the settings that best suit you.
Heat setting Suitability
1 - 2 • delicate warming for small amounts of food
• melting chocolate, butter, and foods that burn quickly
• gentle simmering
• slow warming
3 - 4 • reheating
• rapid simmering
• cooking rice
5 - 6 • pancakes
7 - 8 • sautéing
• cooking pasta
9• stir-frying
• searing
• bringing soup to the boil
• boiling water
8. Installation
  6HOHFWLRQRILQVWDOODWLRQHTXLSPHQW
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant and insulated work surface material (Wood and similar fibrous or
hygroscopic material shall not be used as work surface material unless
impregnated) to avoid the electrical shock and larger deformation caused by the
heat radiation from the hotplate. As shown below:
Note: The safety distance between the sides of the hob andWKHLQQHU
VXUIDFHV of the ZRUNWRS should be at least 3mm.
A(mm) B(mm) C(mm) D(mm) E(mm) F(mm) G
268ˇ4
-0
500ˇ4
-0 50min. 50 min. 50 min. 50 min. 3mm min.

A
C
B
D
F
E
Min.3mm
F

Under any circumstances, make sure the Induction cooker hob is well ventilated and
the air inlet and outlet are not blocked. Ensure the Induction cooker hob is in good
work state. As shown below
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
A(mm) B(mm) C(mm) D E
760 50 min. 20 min. Air intake Air exit 5 mm
:$51,1*(QVXULQJ $GHTXDWH9HQWLODWLRQ
0DNHVXUHWKHinduction cooker hobLVZHOOYHQWLODWHGDQGWKDWDLULQOHWDQGRXWOHWDUHQRWEORFNHG
,QRUGHUWRDYRLGDFFLGHQWDOWRXFKZLWKWKHRYHUKHDWLQJERWWRPRIWKHKRERUJHWWLQJXQH[SHFWDEOH
HOHFWULFVKRFNGXULQJZRUNLQJLWLVQHFHVVDU\WRSXWDZRRGHQLQVHUWIL[HGE\VFUHZVDWDPLQLPXP
GLVWDQFHRIPPIURPWKHERWWRPRIWKHKRE)ROORZWKHUHTXLUHPHQWVEHORZ








 
7KHUHDUHYHQWLODWLRQKROHVDURXQGRXWVLGHRIWKHKRE<280867 HQVXUHWKHVH
KROHVDUHQRWEORFNHGE\WKHZRUNWRSZKHQ\RXSXWWKHKRELQWRSRVLWLRQ


Min. 5 cm
Max. 5 mm Max. 5 mm
A
B
C
E
D

z%H DZDUH WKDW WKH JOXH WKDW MRLQ WKH SODVWLF RU ZRRGHQ PDWHULDO WR WKH
IXUQLWXUHKDVWRUHVLVWWRWHPSHUDWXUHQRWEHORZദWRDYRLGWKHXQVWXFN
RIWKHSDQHOLQJ 
z7KHUHDUZDOODGMDFHQWDQGVXUURXQGLQJVXUIDFHVPXVWWKHUHIRUHEHDEOHWR
ZLWKVWDQGDQWHPSHUDWXUHRIć

  %HIRUHLQVWDOOLQJWKHKREPDNHVXUHWKDW
• The work surface is square and level, and no structural members interfere with space
requirements.
• The work surface is made of a heat-resistant and insulated material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
• The installation will comply with all clearance requirements and applicable standards and
regulations.
• A suitable isolating switch providing full disconnection from the mains power supply is
incorporated in the permanent wiring, mounted and positioned to comply with the local
wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap contact
separation in all poles (or in all active [phase] conductors if the local wiring rules allow for
this variation of the requirements).
• The isolating switch will be easily accessible to the customer with the hob installed.
• You consult local building authorities and by-laws if in doubt regarding installation.
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall
surfaces surrounding the hob.
$IWHULQVWDOOLQJWKHKREPDNHVXUHWKDW
• The power supply cable is not accessible through cupboard doors or drawers.
• There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
• If the hob is installed above a drawer or cupboard space, a thermal protection barrier is
installed below the base of the hob.
• The isolating switch is easily accessible by the customer.
  %HIRUHORFDWLQJWKHIL[LQJEUDFNHWV
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the hob.

 

  $GMXVWLQJWKHEUDFNHWSRVLWLRQ
Fix the hob on the work surface by screw 4 brackets on the bottom of hob(see picture) after
installation.
Adjust the bracket position to suit for different table top thickness.









Under any circumstances, the brackets cannot touch withWKHLQQHUVXUIDFHVRIWKH
ZRUNWRS after installation (see picture)
  &DXWLRQV
1. The induction hotplate must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine
or clothes dryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed such that better heat radiation can be ensured to
enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.

HOB
TABLE
A
HOB
TABLE
B
B5ACKET B5ACKET