Franke FFC 1005 XS Operation manual

Instructions for use and installation
Cooker Hood
Istruzioni per l’uso e l’installazione
Cappa
Mode d’emploi et installation
Hotte de Cuisine
Bedienungsanleitung und Installation
Dunstabzugshaube
Kullanım ve montaj talimatları
Davlumbaz
Uživatelská Pøíruèka
Odsavačpar
Asennus-, käyttö- ja hoito-opas
Liesituuletin
Інструкція зексплуатації івстановлення
Витяжка
Libret de Instruciuni
Cartier
  

FFC 905-P XS
FFC 905-P XS CH
FFC 1005 XS
GB
IT
FR
DE
TR
CZ
FI
UK
ROI


2
2
INDEX
RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 4
CHARACTERISTICS ............................................................................................................................................................. 7
INSTALLATION...................................................................................................................................................................... 9
USE...................................................................................................................................................................................... 12
MAINTENANCE................................................................................................................................................................... 13
INDICE
CONSIGLI E SUGGERIMENTI............................................................................................................................................ 15
CARATTERISTICHE............................................................................................................................................................ 18
INSTALLAZIONE ................................................................................................................................................................. 20
USO...................................................................................................................................................................................... 23
MANUTENZIONE ................................................................................................................................................................ 24
SOMMAIRE
CONSEILS ET SUGGESTIONS.......................................................................................................................................... 26
CARACTERISTIQUES......................................................................................................................................................... 29
INSTALLATION.................................................................................................................................................................... 31
UTILISATION ....................................................................................................................................................................... 34
ENTRETIEN......................................................................................................................................................................... 35
INHALTSVERZEICHNIS
EMPFEHLUNGEN UND HINWEISE ................................................................................................................................... 37
CHARAKTERISTIKEN......................................................................................................................................................... 40
MONTAGE ........................................................................................................................................................................... 42
BEDIENUNG........................................................................................................................................................................ 45
WARTUNG........................................................................................................................................................................... 46
IÇERIKLER
TAVSİYELER VE ÖNERİLER.............................................................................................................................................. 48
ÖZELLIKLER........................................................................................................................................................................ 51
MONTAJ............................................................................................................................................................................... 53
KULLANIM ........................................................................................................................................................................... 56
BAKIM .................................................................................................................................................................................. 57
OBSAH
RADY A DOPORUČENÍ ...................................................................................................................................................... 59
HLAVNÍ PARAMETRY......................................................................................................................................................... 62
INSTALACE ......................................................................................................................................................................... 64
POUŽITÍ ............................................................................................................................................................................... 67
ÚDRŽBA............................................................................................................................................................................... 68
EN
IT
FR
DE
TR
CZ

3
3
SISÄLTÖ
OHJEET JA SUOSITUKSET ............................................................................................................................................... 70
MITAT JA OSAT .................................................................................................................................................................. 73
ASENNUS............................................................................................................................................................................ 75
KÄYTTÖ............................................................................................................................................................................... 78
HUOLTO .............................................................................................................................................................................. 79
ІНДЕКС
РЕКОМЕНДАЦІЇ ТА ПОРАДИ............................................................................................................................................ 81
ХАРАКТЕРИСТИКИ............................................................................................................................................................ 84
ВСТАНОВЛЕННЯ ............................................................................................................................................................... 86
ВИКОРИСТАННЯ ............................................................................................................................................................... 89
ОБСЛУГОВУВАННЯ........................................................................................................................................................... 90
CUPRINS
RECOMANDĂRI ŞI SUGESTII............................................................................................................................................ 92
CARACTERISTICI ............................................................................................................................................................... 95
INSTALAREA....................................................................................................................................................................... 97
UTILIZARE......................................................................................................................................................................... 100
ÎNTREŢINERE ................................................................................................................................................................... 101

 ............................................................................................................................................103
.........................................................................................................................................................106
...........................................................................................................................................................108
...........................................................................................................................................................111
 ..................................................................................................................................................112
FI
UA
RO
SA

EN 4
4
RECOMMENDATIONS AND SUGGESTIONS
The Instructions for Use apply to several versions of this appliance.
Accordingly, you may find descriptions of individual features that do not
apply to your specific appliance.
INSTALLATION
• The manufacturer will not be held liable for any damages resulting from
incorrect or improper installation.
• The minimum safety distance between the cooker top and the extractor hood
is 650 mm (some models can be installed at a lower height, please refer to
the paragraphs on working dimensions and installation).
• Check that the mains voltage corresponds to that indicated on the rating
plate fixed to the inside of the hood.
• For Class I appliances, check that the domestic power supply guarantees
adequate earthing.
Connect the extractor to the exhaust flue through a pipe of minimum
diameter 120 mm. The route of the flue must be as short as possible.
• Do not connect the extractor hood to exhaust ducts
carrying combustion fumes (boilers, fireplaces, etc.).
• If the extractor is used in conjunction with non-electrical
appliances (e.g. gas burning appliances), a sufficient
degree of aeration must be guaranteed in the room in
order to prevent the backflow of exhaust gas. The
kitchen must have an opening communicating directly
with the open air in order to guarantee the entry of clean air. When the
cooker hood is used in conjunction with appliances supplied with energy
other than electric, the negative pressure in the room must not exceed 0,04
mbar to prevent fumes being drawn back into the room by the cooker hood.
• The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other
fuels (not applicable to appliances that only discharge the
air back into the room).
• In the event of damage to the power cable, it must be
replaced by the manufacturer or by the technical service
department, in order to prevent any risks.
2°

EN 5
5
• If the instructions for installation for the gas hob specify a greater distance
specified above, this has to be taken into account. Regulations concerning
the discharge of air have to be fulfilled.
• Use only screws and small parts in support of the hood.
Warning: Failure to install the screws or fixing device in accordance with
these instructions may result in electrical hazards.
• Connect the hood to the mains through a two-pole switch having a contact
gap of at least 3 mm.
USE
• The extractor hood has been designed exclusively for domestic use to
eliminate kitchen smells.
• Never use the hood for purposes other than for which it has been designed.
• Never leave high naked flames under the hood when it is in operation.
• Adjust the flame intensity to direct it onto the bottom of the pan only, making
sure that it does not engulf the sides.
• Deep fat fryers must be continuously monitored
during use: overheated oil can burst into flames.
• Do not flambè under the range hood; risk of fire.
• This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.

EN 6
6
• “CAUTION: Accessible parts may become hot when used with cooking
appliances.”
MAINTENANCE
•Switch off or unplug the appliance from the mains supply before carrying out
any maintenance work.
• Clean and/or replace the Filters after the specified time period (Fire hazard).
• The Grease filters must be cleaned every 2 months of operation, or more
frequently for particularly heavy usage, and can be washed in a dishwasher.
• The Activated charcoal filter is not washable and cannot be regenerated,
and must be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• "Failure to carry out cleaning as indicated will result in a fire hazard".
• Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.

EN 7
7
CHARACTERISTICS
Components
Ref. Q.ty Product components
11 Cooker hood complete with control unit, lights, blower
unit, filters
21 Telescopic chimney comprised of:
2.1 1 upper chimney
2.2 1 lower chimney
91 reducer flange ø 150-120 mm
14.1 2 air outlet connection extension
15 1 air outlet connection
Ref. Q.ty Installation components
7.1 1 Lower corner spacer
7.2 1 Hood fixing support piece
7.3 1 Air outlet connection support piece
7.4 1 Upper chimney support piece
11 10 Wall plugs ø 8
12a 10 Screws 4,2 x 44,4
12b 2 Screws 4,2 x 12,7
12c 12 Screws 2,9 x 9,5
Q.ty Documentation
1 Instruction booklet
14.1
15
12a
11
11
11
12b
12c
12c
12a
12c
12c
12a
9
2.1
2.2
2
17.1
7.2
7.3
7.4

EN 8
8
Dimensions

EN 9
9
INSTALLATION
Drilling the wall and fixing the brackets
Do the following marking on the wall:
• a horizontal line at minimum 650 mm above the hob.
• As indicated, place the support fixing piece of the hood 7.2 at 338,5 mm above the horizon-
tal reference line.
• Mark the centres of holes in the support.
• Drill ø 8 mm.
• Insert the dowels 11 into the holes.
• Fix the support using the screws 12a (4,2 x 44,4) supplied.
• Insert and screw two screws 12b (4,2 x 12,7) (supplied) into the holes for the hood body fix-
ing, placed in the frontal part of the support fixing piece leaving a 5-6 mm distance between
the support and the screw head.
• As indicated, place the upper chimney support 7.4 at the corner of the ceiling.
• Mark the centres of holes in the upper chimney support 7.4.
• Drill ø 8 mm.
• Insert the dowels 11 into the holes.
• Fix the upper chimney support using the screws 12a (4,2 x 44,4) supplied.
N.B. In case of impossibility to install the Upper chimney support 7.4. to the ceiling, it’s pos-
sible to do that lower, using the 4 Back holes instead of the Uppers.
To install the hood in recycling version it is necessary to follow the instructions described
in the part concerning Recirculation version Air Outlet.
338,5
650 min.
7.2
11
12a
12b
7.4
11
12a

EN 1
10
Mounting the hood body
• If, according to installer, the empty space between the lower part of the
hood and the wall corner has to be filled, it is then necessary to install
the corner spacer 7.1 at the hood basis using two screws 12c (2,9 x 9,5)
supplied.
• Fasten the two screws Vr placed at the hook areas of the hood.
• Hang the hood body on the specific screws 12b (4,2 x 12,7).
• Fasten definitively the support screws 12b (4,2 x 12,7).
• It is possible to level the hood body by adjusting the screws Vr.
• To definitively fix the hood to the ceiling it is necessary to use two re-
maining screws together with plug and washer. These have to be
placed from inside the hood.
12b
Vr
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney us-
ing either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is
left to the installer.
• To install a ø 120 mm air exhaust connection, insert the reducer flange
9 on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps (not supplied).
• Remove any activated charcoal filters.
ø 150
9
ø 120
RECIRCULATION VERSION AIR OUTLET
• Insert the extension pieces 14.1 laterally on the air outlet connection
piece 15.
Fix the connection piece with the extension pieces onto the support 7.3
using the two screws 12c (2,9 x 9,5) provided.
• Insert the assembled unit inside the upper chimney support 7.4 using
the 4 screws 12c (2,9 x 9,5) provided.
• Connect the hood with the air outlet connection piece using a rigid or a
flexible ø150 tube chosen by the installer. It will be necessary to use
narrow strips (not provided) for this connection.
• Make sure that the charcoal filter has been mounted inside the hood.
12c
12c

EN 1
11
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Chimney mounting
• Remove the chimney parts out of the packing leaving them one
inside the other.
• Extend slightly the two side parts of the chimney and place the
upper chimney on the chimney support 7.4.
• Fix the upper chimney with two screws 12c (2,9 x 9,5) sup-
plied
• Move the lower chimney downwards until the two side lips of
the chimney are completely inside their seats in the hood body.
• Remove the grease filters.
• Fix the chimney onto the hood body with two screws 12c (2,9
x 9,5) supplied, tighting them from inside the hood.
• Replace the grease filters.
12c
12c

EN 1
12
USE
Control panel
Button Led Function
T1 - Turns the Motor off.
T2 Fixed Turns the Motor on at Speed one.
T3 Fixed Turns the Motor on at Speed two.
The Led
corresponding
to the speed
that has been
set flashes
once every
second.
Turns the Delay Function on and off when pressed and held for 2 seconds.
Activates automatic switch-off (Motor+Lights) with a 30’ delay. Suitable
to complete elimination of residual odours. Can be activated from any
position when the Intensive function is disabled, and is deactivated by
pressing the button or turning the motor off.
T4 Fixed Turns the Motor on at Speed Three.
Flashes twice a
second.
Turns the Intensive function on and off.
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed that was set before. It is disabled by
pressing the button or turning the motor off. It cannot be activated when the
Delay function is active.
L- Turns the Lighting System on and off at maximum intensity.
- Press and hold for 2 seconds to turn the Lighting System on and off at
reduced intensity.

EN 1
13
MAINTENANCE
Grease filters
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months of operation, or
more frequently for particularly heavy usage, and can be
washed in a dishwasher.
• Remove the filters one at a time holding them up with one
hand and pulling the handle downwards with the other hand at
the same time.
• Wash the filters, taking care not to bend them. Allow them to
dry before refitting.
• When refitting the filters, make sure that the handle is visible
on the outside.
Activated charcoal filter (Recirculation version)
REPLACING THE ACTIVATED CHARCOAL FILTER
• The filter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or
more frequently for particularly heavy usage.
• Remove the metal grease filters.
• Remove the saturated activated carbon filter by releasing the
fixing hooks.
• Fit the new filter by hooking it into its seating.
• Refit the metal grease filters.

EN 1
14
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Remove the snap-on lamp cover by levering it from
under the metal ring, supporting it with one hand.
• Remove the halogen lamp from the lamp holder by
pulling gently.
• Replace the lamp with a new one of the same type,
making sure that you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.
Lamp Power (W) Socket Voltage (V) Dimension (mm) ILCOS Code
28 E14 220 – 240 104 x 35 HSGSB/C/UB-28-220/240-E14
28 E14 230 85x25 HDG-28-230-E14-25
20 G4 12 33 x 9 HSG/C/UB-20-12-G4
35 GU10 230 51 x 50,7 HAGS-35-230-GU10-51/40
50 GU10 230 51 x 50,7 HAGS-35-230-GU10-51/20
20 GU4 12 40 x 35 HRGS-20-12-GU4-35/30
20 GU5.3 12 46 x 51 HRGS-20-12-GU5.3-50/10
16 G13 95 720 x 26 FD-16/40/1B-E-G13-26/720
18 G13 57 589,8 x 26 FD-18/40/1B-E-G13-26/600
9 G23
60 (lamp)
220-240 (starter) 167 x 28 FSD-9/27/1B-I-G23
11 G23
91 (lamp)
220-240 (starter) 235,8 x 28 FSD-11/40/1B-I-G23

IT 1
15
CONSIGLI E SUGGERIMENTI
Le Istruzioni per l’uso si riferiscono ai diversi modelli di questo
apparecchio. Pertanto, si potrebbero trovare descrizioni di singole
caratteristiche che non appartengono al proprio apparecchio specifico.
INSTALLAZIONE
• Il fabbricante non potrà ritenersi responsabile per eventuali
danni risultanti da un’installazione o utilizzazione
impropria.
• La distanza minima di sicurezza tra il piano cottura e la
cappa aspirante è di 650 mm (alcuni modelli possono
essere installati a un’altezza inferiore; vedere il paragrafo
relativo alle dimensioni di lavoro e all'installazione).
• Controllare che la tensione di rete corrisponda a quella indicata sulla targa
dati applicata all’interno della cappa.
• Per gli apparecchi di Classe I, controllare che la rete di alimentazione
domestica disponga di un adeguato collegamento a massa.
Collegare l'aspiratore al condotto dei fumi mediante un tubo con diametro
minimo di 120 mm. Il percorso dei fumi deve essere il più corto possibile.
• Non collegare la cappa aspirante ai condotti fumari che trasportano fumi di
combustione (per es. caldaie, camini ecc.).
• Se l’aspiratore è utilizzato in combinazione con apparecchi non elettrici (per
es. apparecchi a gas), deve essere garantito un sufficiente grado di
aerazione nel locale per impedire il ritorno di flusso dei gas di scarico. La
cucina deve avere un'apertura comunicante direttamente
con l'esterno per garantire l'afflusso di aria pulita. Quando la
cappa per cucina è utilizzata in combinazione con
apparecchi non alimentati dalla corrente elettrica, la
pressione negativa nel locale non deve superare 0,04 mbar
per evitare che i fumi vengano riaspirati nel locale dalla cappa.
• L'aria non deve essere scaricata attraverso un tubo flessibile utilizzato per
l'aspirazione dei fumi da apparecchi alimentati a gas o altri combustibili (non
utilizzare con apparecchi che scaricano unicamente l'aria nel locale).
• In caso di danneggiamento del cavo di alimentazione, occorre farlo sostituire
dal produttore o dal reparto di assistenza tecnica per evitare qualsiasi
rischio.
2°

IT 1
16
• Se le istruzioni di installazione del piano cottura a gas specificano una
distanza maggiore di quella sopra indicata, è necessario tenerne conto.
Devono essere rispettate tutte le normative riguardanti lo scarico dell'aria.
• Usare solo viti e minuteria di tipo idoneo per la cappa.
Avvertenza: la mancata installazione delle viti o dei dispositivi di fissaggio in
conformità alle presenti istruzioni può comportare rischi di scosse elettriche.
• Collegare la cappa all'alimentazione di rete mediante un interruttore bipolare
con distanza tra i contatti di almeno 3 mm.
USO
• La cappa aspirante è progettata esclusivamente per l’uso domestico allo
scopo di eliminare gli odori dalla cucina.
• Non usare mai la cappa per scopi diversi da quelli per cui è stata progettata.
• Non lasciare mai fiamme alte sotto la cappa quando è in funzione.
• Regolare l'intensità della fiamma in modo da dirigerla esclusivamente verso
il fondo del recipiente di cottura, assicurandosi che non ne avvolga i lati.
• Le friggitrici devono essere costantemente
controllate durante l’uso: l’olio surriscaldato
potrebbe incendiarsi.
• Non cuocere al flambé sotto la cappa: si potrebbe
sviluppare un incendio.
• Questo apparecchio può essere utilizzato da
bambini di età non inferiore a 8 anni e da persone con ridotte capacità psico-
fisico-sensoriali o con esperienza e conoscenze insufficienti, purché
attentamente sorvegliati e istruiti su come utilizzare in modo sicuro
l'apparecchio e sui pericoli che ciò comporta. Assicurarsi che i bambini non
giochino con l'apparecchio. Pulizia e manutenzione da parte dell'utente non
devono essere effettuate da bambini, a meno che non siano sorvegliati.
• Questo apparecchio non deve essere utilizzato da persone (bambini
compresi) con ridotte capacità psico-fisico-sensoriali o con esperienza e
conoscenze insufficienti, a meno che non siano attentamente sorvegliate e
istruite da una persona responsabile della loro incolumità.

IT 1
17
• “ ATTENZIONE: le parti accessibili possono diventare molto calde durante
l’uso degli apparecchi di cottura ”.
MANUTENZIONE
•Spegnere o scollegare l’apparecchio dalla rete di alimentazione prima di
qualunque operazione di pulizia o manutenzione.
• Pulire e/o sostituire i filtri dopo il periodo di tempo specificato (pericolo di
incendio).
• I filtri antigrasso devono essere puliti ogni 2 mesi di funzionamento o più
frequentemente in caso di utilizzo molto intenso e possono essere lavati in
lavastoviglie.
• Il filtro al carbone attivo non è lavabile né è rigenerabile e deve essere
sostituito ogni 4 mesi di funzionamento circa o più frequentemente in caso di
utilizzo molto intenso.
• "Vi è il rischio di incendio se la pulizia non viene effettuata secondo le
istruzioni".
• Pulire la cappa utilizzando un panno umido e un detergente liquido neutro.
Il simbolo sul prodotto o sulla sua confezione indica che il prodotto non
può essere smaltito come un normale rifiuto domestico. Il prodotto da smaltire
deve essere conferito presso un apposito centro di raccolta per il riciclaggio
dei componenti elettrici ed elettronici. Assicurandosi che questo prodotto sia
smaltito correttamente, si contribuirà a prevenire potenziali conseguenze
negative per l’ambiente e per la salute che potrebbero altrimenti derivare dal
suo smaltimento inadeguato. Per informazioni più dettagliate sul riciclaggio di
questo prodotto, contattare il Comune, il servizio locale di smaltimento rifiuti
oppure il negozio dove è stato acquistato il prodotto.

IT 1
18
CARATTERISTICHE
Componenti
Rif. Q.tà Componenti di Prodotto
11 Corpo Cappa completo di: Comandi, Luce, Gruppo
Ventilatore, Filtri
21 Camino Telescopico formato da:
2.1 1 Camino Superiore
2.2 1 Camino Inferiore
91 Flangia di Riduzione ø 150-120 mm
14.1 2 Prolunga Raccordo Uscita Aria
15 1 Raccordo Uscita Aria
Rif. Q.tà Componenti di Installazione
7.1 1 Tappo ad Angolo Inferiore
7.2 1 Supporto Attacco Cappa
7.3 1 Supporto Raccordo Uscita Aria
7.4 1 Supporto Camino Superiore
11 10 Tasselli ø 8
12a 10 Viti 4,2 x 44,4
12b 2 Viti 4,2 x 12,7
12c 12 Viti 2,9 x 9,5
Q.tà Documentazione
1 Libretto Istruzioni
14.1
15
12a
11
11
11
12b
12c
12c
12a
12c
12c
12a
9
2.1
2.2
2
17.1
7.2
7.3
7.4

IT 1
19
Ingombro

IT 2
20
INSTALLAZIONE
Foratura Parete e Fissaggio Staffe
Tracciare sulla Parete:
• una linea Orizzontale a: 650 mm min. sopra il Piano di Cottura.
• Appoggiare come indicato il Supporto Attacco Cappa 7.2 a 338,5 mm sopra la linea Oriz-
zontale di riferimento.
• Segnare i centri dei Fori del Supporto.
• Forare ø 8 mm i punti segnati.
• Inserire i tasselli 11 nei fori.
• Fissare il Supporto, utilizzando le Viti 12a (4,2 x 44,4) in dotazione.
• Avvitare 2 Viti 12b (4,2 x 12,7) in dotazione nei fori per il fissaggio del Corpo Cappa, posi-
zionati sulla piastra frontale del Supporto Attacco Cappa, lasciando uno spazio di 5-6 mm
fra il supporto e la testa della vite.
• Appoggiare come indicato il Supporto Camino Superiore 7.4 sull’angolo del soffitto.
• Segnare i centri dei Fori del Supporto Camino Superiore 7.4.
• Forare ø 8 mm i punti segnati.
• Inserire i tasselli 11 nei fori.
• Fissare il Supporto Camino Superiore utilizzando le Viti 12a (4,2 x 44,4) in dotazione.
N.B. Qualora non fosse possibile installare il Supporto Camino Superiore 7.4 al soffitto, è pos-
sibile farlo più in basso, utilizzando i 4 Fori Posteriori al posto di quelli Superiori.
Per installazione in Versione Filtrante, effettuare subito le operazioni descritte nel para-
grafo Uscita Aria Versione Filtrante.
338,5
650 min.
7.2
11
12a
12b
7.4
11
12a