Frico IHBD3 Operation and maintenance manual

Comfort control
IHBD3
.... 3
GB .... 5
DE

Comfort control IHBD3
2
GB
Brief Introduction
The unit is designed for the IR heater which
has no remote -control function so the heater
can be controlled by Remote control and
Bluetooth.
Important Safety Instructions
When using IHBD3, basic safety precautions
should always be followed to reduce the risk
of fire, electric shock, or injury to persons,
etc. Read all instructions before using this
IHBD3. Make sure the instructions are stored
in the safe place for future reference. Make
sure IHBD3 is together with the manual
• Check if the voltage indicated on the
nameplate of IHBD3 corresponds to the
local mains voltage before using IHBD3.
• A multiperture outlet may be used
when using IHBD3. The electricity load
rating marked on the outlet must have
the enough current-carrying capability
and corresponds to requirements of
the power supply companies and the
regional construction. Check if the voltage
indicated on the nameplate of IHBD3
corresponds to the electricity load rating
marked on the socket before using.
• Do not cover anything including but
not limited to clothes, blankets, pillows,
papers , etc. to avoid overheating.
• Please note that IHBD3 will not be covered
with something including but not limited
to curtains, tents, flags, etc. due to the
wind or other environmental influences
when under the work.
• Do not make the power cord hang on the
edge of the table or touch the quite hot
surface.
• Contact with the manufacturer or service
agent or a suitably qualified person for
maintenance to avoid danger if the power
cord is damaged.
• In case of improper use, there is a risk
of electrical shock and/or fire hazard.
Operation of the appliance must be
discontinued and turn off the electricity
immediately. Do not try to repair the
appliance by yourself. Please contact with
the service agent or a suitably qualified
electrician for maintenance.
• Turn off the electricity before
maintenance.
• Physically and psychologically immature
or mentally handicapped (including
children) person or someone who is
lack of the use experience or relevant
knowledge shouldn’t use IHBD3 unless
under the supervision.
• In order to keep children from the danger
of IHBD3, IHBD3 should be in the place
that children do not have access to it.
Never leave them unsupervised with
IHBD3. Consequently, when selecting the
location for your IHBD3, do so in such a
way that children do not have access to
IHBD3.
• IHBD3 must only be mounted by an
authorized specialist, paying attention
to the relevant regulations of the power
supply companies and the regional
construction regulations.
• Do not install programs, timers,
individual control systems or any other
facilities to make it be able to be opened
automatically. There is a potential risk of
fire if the location is wrong.
• Remove the plug from the outlet when not
in use.
• This IHBD3 cannot be use in the
construction sites.
Operation Instructions
• Remove all packaging material (including
anti-vibration packaging on the lamp) and
check IHBD3, supply cord and plug for
signs of damage.
• Pay attention to the mounting place and
all mounting material(dowels, screws).
Ensure they are suitable
• and stable enough for mounting and
lastingly holding of IHBD3.
• Pay attention that, the installation of the
appliance must not add excessive wind
load.
• Adjust the desired angle of radiation and
fest screw all screws. Check regularly the
Safety Instructions and Operation Manual

Comfort control IHBD3
3
GB
screw's connection.
• Mechanical bearing pressure and
oscillation due to wind or rain could lead
to loose.
• Plug in the power source, then observe,
whether during the first 10-15 minutes
IHBD3 works trouble-free.
Figure1:Fix the control IHBD3 on the wall first.
Specifications
Voltage (V) 220-240,50/60Hz
Power consumption (W) 3000W Max
IP IP65
Cleaning and Maintenance
• This IHBD3 is manufactured from robust and
maintenance-free aluminum with a protective
cover and a radiation n. There are no user
serviceable parts inside.
• Before cleaning,remove the plug from the po-
wer outlet and wait until IHBD3 is sufciently
cooled off.
• Wipe IHBD3 only with clean and lint-free cloth
or a soft brush.
• Never use abrasive cleaners, scrubbing brushes
and chemical cleaners for cleaning!
• Can use alcohol to clean IHBD3.
• To protect against electrical shock and danger
to life, do not immerse the cord, plug, or any
part of this IHBD3 in water or any other liquid.
• For The PC of IHBD3 replacement, please
contact the manufacturer or its service agent or
a similarly qualied person.
Disposal
In accordance with European Directive 2001/96/
EG concerning used electrical and electronic app-
liances
(waste electrical and electronic equipment WEEE),
please return any electrical equipment that you
will no longer use to the collection points provided
for their disposal. This symbol indica-
tes that the appliance cannot be treated
as normal domestic trash, but must be
handed to a collection point for recycling
electric and electronic appliances.
Information concerning where the equip-
ment can be disposed of can be obtained from your
local
authority.
Customer Service
• Repairs must be carried out by authorized spe-
cialists, thus ensuring electrical safety.
• Please contact with the service agent or a suita-
bly qualied electrician.
• Improper repairs could lead to danger to the
user.
• This warranty does not cover damage of failure
which results from alteration, accident, misuse,
abuse, neglect, commercial use or improper
maintenance. In line with our policy of con-
tinuous product development we reserve the
right to change the product and documentation
specications without notice.

Comfort control IHBD3
4
GB
REMOTE CONTROL INSTRUCTION
Notice
• Use 2 pieces AAA size 1.5V batteries in the
remote control.Remove the battery when
not in use for long time, thus the lifespan
of remote control can be extended.
• Choose the same specification battery
when replacing the battery inside,
otherwise it may cause remote control not
work ,thereby affect the normal use of the
Heater.
• The Heater can be still used in normal
except remote control function if the
Button Graphic Feature
Up Arrow Up one heating level
Max The Heater goes directly to the highest
heating level.
Down Arrow Down one heating level
On To switch the Heater on:
Press ON.The patio Heater has a soft start
function of 33% power. 4 seconds after
the Heater has been turned on, it will
automatically switch to the last heating
level used. In case of the first-time use,
after 4 seconds the heater will automatically
switch to 100% power.
Off To switch the heater off:
Press OFF.The heater will switch to standby
mode(the receiver indicator will light up).
remote control is missing or lost.
• The remote control function may be out
of work if there is a barrier between the
remote control and heater .
• Replacing the batteries duly so as not to
affect the normal use of Heater and remote
control.
Control Instructions
• Water-proof Switch: Control the power
supply of IHBD3;
• Reset Button: Reset the control part of the
IHBD3;
• Download “Frico Infra” from APP of
IOS system or Googleplay from Android
system, then to control the product by
Smartphone.

20170630 HH
Main office
Frico AB Tel: [phone]
Box 102
SE-433 22 Partille [email protected]
Sweden www.frico.se
For latest updated information and information
about your local contact: www.frico.se