Friedrich WALLMASTER User manual

COMMERCIAL AND RESIDENTIAL GRADE
THRU-THE-WALL
AIR CONDITIONERS
THE EXPERTS IN ROOM AIR CONDITIONING

THRU-THE-WALL MODELS
WallMaster®Uni-Fit®
OVERVIEW
Sleeve size Fits 27” sleeves Fits sleeves from
24 1/2” to 27”
Applications RESIDENTIAL OR
LIGHT COMMERCIAL
RESIDENTIAL OR
LIGHT COMMERCIAL
COMFORT & CONVENIENCE
Perfect t for Fedder’s 27” sleeves Y —
Top-mounted controls Y —
Electronic controls Y Y
Programmable timer 24 hr. 24 hr.
Remote control Y Y
Auto-restart when power is
interrupted Y Y
Smart Fan auto adjusting fan Y —
Upward angled air discharge Y —
Air ow direction control 4-way 6-way
Fan speeds 3 3
SOUND REDUCTION
TECHNOLOGY
Steel inner wall and extra dense
insulation Y Steel inner wall
Vibration-isolating design and
components Y Y
Superior airflow design Y —
EARTH
FRIENDLY
ENERGY STAR® models Y Y
Environmentally friendly R-410A Y Y
Energy saver switch Y Y
HEALTH
Washable, antimicrobial air lter Y Y
Stale air exhaust — Y
SAFETY
EntryGard™anti-intrusion
protection Y —
Insect barrier Y —
INSTALLATION
Slideout chassis Y Y
Power cord direction Left Right
Concealed power cord option Y —
Internal drain kit option Y —
Bafe adapter kit (for installation in
Fedders ‘B’ sleeves) Y —
Condensate drain kit Y —
A solid-side wall sleeve allows for
installation in thick exterior walls where the
installation of room air units with side vents
would affect performance and may even void
the warranty.
WHEN SHOULD YOU INSTALL
A SOLID SIDE SLEEVE?
FRIEDRICH THRU-THE-WALL
Solid-side sleeve (no side vents) can
be installed in thicker walls. Sleeve
can be positioned ush with exterior
wall.
ROOM AIR CONDITIONER
Blocked side vents restrict air ow.
Or with minimum intrusion into the
room.
WallMaster®. A perfect fit in Friedrich and competitor’s
27” sleeves.
Commercial grade quality unit is ideal for installation in new
construction, retrots and remodels.
THRU-THE-WALL AIR CONDITIONERS
NOTE: Chassis requires WSE sleeve for new installations (sold and shipped separately)
WallMaster®
8000-15600 Btu
Up to 10.4 EER
WallMaster®
Electric Heat
COOLING
9800-15600 Btu
Up to 9.8 EER
ELECTRIC HEAT
9100-11000 Btu
WallMaster®
Heat Pump
COOLING
9000-12000 Btu
Up to 9.8 EER
HEATING
7500-9350 Btu
Up to 2.6 COP
COOL & HEAT
COOL
Perfect t in 27"
wall sleeves,
including Fedders A
and B* sleeves.
Fits Fedders A & B sleeves. *B sleeve installations require BAK accessory, bafe adapter kit.
WSE wall sleeve ships
with weather panels
and grille.
Sleeve is shown at right with
standard galvanized steel
inner panel, painted steel
outer panel and standard
grille
Inner steel weather panel WSE sleeve Outer weather panel Standard grille
Select MODE, FAN SPEED,
MONEY SAVER®, adjust
TEMPERATURE and set the
TIMER.
FITS SLEEVES
16 3/4" HIGH X 27" WIDE
23

WALLMASTER®FEATURES
Chassis requires WSE sleeve (sold and shipped separately)
*Installation in Fedders B sleeve requires a bafe kit. See BAK accessory under accessories.
Durability & Quality
• Rotary compressors provide quiet,
dependable performance
• Premium aluminum exterior grille
• Dense blower insulation
• Ried copper tubing
• Impact resistant front cover
• High tech ns with sine wave lanced
louvers increase energy efciency
by increasing surface area for heat
exchange
Comfort & Convenience
• Easy-to-reach, top mount controls
• Remote control
• 24-hour timer
• Smart Fan auto-adjusts fan speed to
maintain desired temperature
• Check lter reminder
• 3-speed fan
• Auto restart
• Electronic defrost control
• Reversible louver allows a second
airow option
Energy Management
• Money Saver® setting saves money
by operating the fan only when
needed
• ENERGY STAR® qualied models
• R-410A refrigerant
Health and IAQ
• Washable, antimicrobial lter
Sleeve Dimensions
Friedrich
WSE Sleeve
Fedders
A Sleeve
Fedders
B Sleeve*
Height (inches) 16 3/4 16 3/4 16 3/4
Width (inches) 27 27 27
Depth (inches) 16 3/4 16 3/4 19 3/4
Ried copper
tubing
Sine wave
lanced louvers
Installation Features
• Mounts ush with the exterior wall
for a neat appearance
• Ideal for thicker wall installations,
where side ns don’t t
• Reversible louver allows for a second
airow option
• A high efciency replacement for 27”
sleeves including Fedders A and B*.
Sleeve measures 27” W x 16 3/4” H
Accessories
• WSE sleeve, ships with inside and
outside weather panel and standard
grille
• AG architectural grille for use with
WSE sleeve
• Bafe adapter kit for use with deep
sleeve installations
• Drain kit for condensate disposal
• Internal drain kit for new
construction applications where
condensate drain system is built-in
Angled air discharge for superior air
distribution when the unit is installed
low on a wall. Reversible louver for a
second air ow option.
Safety & Security
• EntryGard™anti-intrusion protection
secures chassis to sleeve to deter ‘kick-
in’ intrusion
• Power cord current leakage protected
• Insect barrier
WallMaster®fits existing Fedders sleeves.
Uni-Fit®
8000-13000 Btu
Up to 9.8 EER
Uni-Fit®
Electric Heat
COOLING
8000-11500 Btu
Up to 9.6 EER
ELECTRIC HEAT
3850-11200 Btu
Uni-Fit®Universal fit for easy replacement in existing 24 1/2˝,
26” or 27” sleeves.
Residential grade quality for installation in new construction,
retrots and remodels.
NOTE: Chassis requires USC sleeve for new installations (sold and shipped separately)
THRU-THE-WALL AIR CONDITIONERS
COOL & HEAT
COOL
Select MODE, FAN SPEED,
MONEY SAVER®, adjust
TEMPERATURE and set the
TIMER.
FITS SLEEVES
24 1/2", 26" AND 27" WIDE
Sleeve can be installed ush with
the exterior wall. Optional AG
architectural grille shown.
USC wall sleeve ships
with weather panels
and grille.
Sleeve is shown at right with
standard painted steel inner
panel, painted steel outer
panel and standard grille Inner weather panel USC sleeve Outer weather panel Standard grille
45

THRU-THE-WALL OPTIONAL ACCESSORIES
Model Height Width Depth
Depth
with
Front
Minimum
Extension
Into Room
Minimum
Exten-
sion
Outside
Thru-the-wall
Finished Hole
Height Width Max. Depth
WallMaster®
WSE Sleeve 16 3/4" 27" 16 3/4" 23" 7 1/2" 9/16" 17 1/4" 27 1/4" 15 5/16"
Chassis 15 3/4" 26 1/2" 21" 22” – – – – –
Uni-Fit®
USC Sleeve 15 1/2" 25 7/8" 16 3/4" 20 1/2" – 1/2" 15 3/4" 26 1/8" 16 1/4"
US Chassis 14 3/8"24" 18 1/2” 20 1/8" 3 3/4" – – – –
UE Chassis 14 3/8" 24 5/8" 18” 19 5/8" 3 1/2" – – – –
Sleeve/Chassis Dimensions
IMPORTANT:
US chassis w/front fully installed into USC sleeve extends
into room 3 3/8”. UE chassis w/front fully installed into
USC sleeve extends into room 2 7/8”. 1” gap on sides and
1/2” gap at top can be covered by two-piece trim ring that
ts over the chassis front
STANDARD GRILLE – Ships with USC sleeve
Expanded aluminum grille designed for use with USC sleeve.
REPLACEMENT GRILLE – Ships with US/UE chassis
Black plastic for use on existing sleeves without any grille.
IMPORTANT:
When installing into an existing sleeve, consult Installation
Section of your Installation/Operation Manual to determine
whether or not the grille needs to be replaced and/or a bafe
adapter should be used.
Uni-Fit® 26” Sleeve Exterior Grilles
Optional Architectural Grille UXAAUSC Sleeve Standard Grille
Trim ring
Installation Accessories (27” sleeve models only)
IMPORTANT:
Operating the air conditioner
with incorrect rear grille or
without Bafe Adapter Kit
(on 19 3/4” deep sleeve) will
recirculate discharge air and
cause compressor overload
to trip.
This will cause the unit to shut
down temporarily and may
lead to premature compressor
failure.
CORRECT Vertical Louvers
INCORRECT Horizontal Louvers
WallMaster® 27” Sleeve Exterior Grilles
WSE SLEEVE
Optional Architectural Grille- AG
Premium brushed aluminum
grille.
WSE SLEEVE
Standard Grille
Premium, stamped steel grille
with powder coat paint. Ships
with sleeve. Galvanized steel
inner and outer weather panels
also ship with sleeve.
DK / Drain Kit
Installed at the back of the unit and allows for
attachment to condensate disposal system, if
necessary or desired.
IDK / Internal Drain Kit
New construction applications
where a condensate drain system
has been built into the wall interior.
BAK / Bafe Adapter Kit
Necessary when installing in a
sleeve deeper than 16 3/4" deep,
such as Fedders B sleeve
(19 3/4" deep).
US= 3 3/8”, UE= 2 7/8”
UNI-FIT®FEATURES
Sleeve
Dimensions
Friedrich
USC Sleeve Amana
Carrier
(51S
Series)
Fedders/
Emerson/
Friedrich WSE
Emer-
son/
Fedders
GE/
Hot-
point Whirlpool
White-Westinghouse/
Frigidaire/ Carrier (52F
Series)
Height
(inches)
15 1/2 15 5/8 16 7/8 16 3/4 15 3/4 15 5/8 16 1/2 15 1/4
Width
(inches)
25 7/8 26 25 3/4 27 26 3/4 26 25 7/8 25 1/2
Depth
(inches)
16 3/4 16 7/8 18 5/8 16 3/4 or 19 3/4 15 16 7/8 17 1/8 or 23 16, 17 1/2 or 22
Comfort & Convenience
• 6-way air ow control
• Remote control
• 24-hour timer
• Check lter reminder
• 3-speed fan
• Auto restart
• Defrost control
Energy Management
• Money Saver® setting saves money
by conserving energy
• ENERGY STAR® qualied models
• R-410A refrigerant
Health and IAQ
• Washable antimicrobial lter
• Stale air exhaust
Durability & Quality
• Rotary compressors provide quiet,
dependable performance
• Seacoast protection for corrosion
resistance in harsh environments
Installation Features
• Universal t trim ring
• Chassis designed to t 24 ½” to 27”
sleeves
• USC sleeve ts standard 26” sleeve
opening. See installation manual for
exact dimensions.
Accessories
• USC sleeve ships with expanded
aluminum grille
• Replacement grille ships with US/
UE chassis for use in existing sleeves
when a grille is needed
• UXAA architectural grille for use with
USC sleeve
Uni-Fit®installs in many existing sleeves.
NOTE: Chassis requires USC sleeve for new installations (sold and shipped separately)
IMPORTANT: 1” gap on sides and 1/2”
gap at top, which allows installation into
varying sleeve sizes, can be covered by
two-piece trim ring that ts over the
chassis front. Trim ring comes standard
with chassis.
Trim ring
NEW!
UXAA- Architectural grille for USC sleeve
67

SPECIFICATIONS
Commercial_Thru-the-wall_Air_Conditioners_Brochure_2014 Printed in USA
ENERGY STAR®models
WALLMASTER HEAT PUMP
HEATING PERFORMANCE: Change-over from heat pump operation to resistance
operation on models indicated is automatic at a preset outside ambient temperature
of approximately 35°F.
Calculate the heat loss of the space to be heated. As long as the heat loss does
not exceed the resistance heating capacity rating of the unit, the heating perfor-
mance will be satisfactory.
Note: all models will produce condensate. If condensate disposal is desired, an
optional drain kit is available.
DEFROST CONTROL: Initiated at 30°F (outdoor coil temperature) and terminated
at 43°F (outdoor coil temperature). During defrost, the compressor stops and the
electric heat starts, then operates with the fan to maintain indoor comfort. Below
43°F, the unit remains in electric heat mode.
DEFROST DRAIN: Drain automatically opens at approximately 50°F to prevent
condensate from freezing inside drain pan.
WallMaster Heat Pump heating information (shown in red) indicates heat pump heating performance. WallMaster Electric Heat heating information (shown in red)
indicates electric heat strip performance. For WallMaster Heat Pump electric heating performance refer to corresponding WallMaster Electric Heat model.
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
As an ENERGY STAR®partner, Friedrich Air Conditioning Co. has determined that the selected ENERGY STAR®
models meet the ENERGY STAR® guidelines for energy efciency.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity
cost of $ .12 per kWh. For more information, visit www.ftc.gov/energy.
LISTED
ROOM AIR CONDITIONERS
183H
Power cords are located on front left of WallMaster models and on front right of Uni-Fit models.
Plug Face/ Circuit Rating
WallMaster®
Model Number
Uni-Fit®
Model Number
Circuit
Rating
Breaker
or T-D Fuse
Plug
Face
(NEMA#)
Power
Cord
Length
(ft.)
Wall
Outlet
Appearance
WS08C10D, WS10C10D,
WS12C10D
US08D10B, UE08D11B
US10D10B, US12D10B 125V - 15A 5 - 15P 6
WS10C30D, WS12C30D,
WS16C30
US10D30B, US12D30B,
US14D30B 250V - 15A 6 - 15P 6
WE10C33D, WE12C33D,
WE16C33, WY09C33D, WY12C33 UE10D33B, UE12D33B 250V - 20A 6 - 20P 6
Model
Carton Dimensions
INCHES
Height Width Depth
WallMaster®
WSE Sleeve 18" 27 1/4" 18"
Chassis 18 1/2" 30 1/2" 29"
Uni-Fit®
USC Sleeve 17 7/8" 28" 19 1/4"
US Chassis 17 1/4" 27 3/4" 22 1/4”
UE Chassis 17 1/4" 27 3/4” 22 1/4”
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665
www.friedrich.com
Estar
Model Cooling Btu Heating Btu
Volts
Rated
Cooling
Amps
Cooling
Watts
Heating
Amps
Heating
Watts
Energy
Efciency
Ratio
EER
Estimated
Yearly
Energy
Cost COP
Moisture
Removal
Pints/HR CFM Sleeve
Net
Weight
Lbs.
Ship
Weight
Lbs
WALLMASTER®
Cool only

WS08C10D 8000 -115 6.4 769 - - 10.4 $69 - 1.2 250 WSE 93 97

WS10C10D 9700 -115 8.2 990 - - 9.8 $89 - 2.4 260 WSE 103 107

WS12C10D 11500 -115 11.5 1174 - - 9.8 $106 - 3.1 295 WSE 112 116

WS10C30D 10000/9800 -230/208 4.5/4.9 1020/1000 - - 9.8/9.8 $92 - 1.5 260 WSE 101 105

WS12C30D 11500/11200 -230/208 5.5/6.0 1174/1143 - - 9.8/9.8 $106 -3.0 290 WSE 109 113
WS16C30 15600/15000 -230/208 8.3/8.9 1835/1765 - - 8.5/8.5 $165 - 4.2 290 WSE 119 123
Heat Pump

WY09C33D 9300/9000 7500/7500 230/208 4.3/4.6 949/918 3.9/4.1 833/833 9.8/9.8 $85 2.6/2.6 2.1 260 WSE 103 107
WY12C33 12000/11800 9350/9200 230/208 6.1/6.4 1395/1372 4.8/5.1 1062/1010 8.6/8.6 $126 2.5/2.6 2.6 275 WSE 111 115
Cool with Electric Heat
WE10C33D 10000/9800 11000/9100 230/208 4.5/4.9 1020/1000 16.0/14.7 3550/2950 9.8/9.8 $92 - 1.5 260 WSE 104 108
WE12C33D 11500/11200 11000/9100 230/208 5.5/6.0 1174/1143 16.0/14.7 3550/2950 9.8/9.8 $106 -3.0 290 WSE 107 111
WE16C33 15600/15000 11000/9100 230/208 8.3/8.9 1835/1765 16.0/14.7 3550/2950 8.5/8.5 $165 - 4.2 290 WSE 119 123
UNI-FIT®
Cool Only

US08D10B 8000 -115 7.4 810 - - 9.8 $73 - 2.2 260 USC 73 79

US10D10B 9800 -115 9.2 1000 - - 9.8 $90 - 3.2 260 USC 78 84

US12D10B 11500 -115 10.7 1170 - - 9.8 $106 - 3.8 TBD USC 80 87

US10D30B 10000/9800 -230/208 4.7/5.1 1020/1000 - - 9.8/9.8 $92 - 3.2 285 USC 78 86

US12D30B 11500/11200 -230/208 5.4/5.8 1170/1140 - - 9.8/9.8 $106 - 3.8 260 USC 80 87
US14D30B 13000/12600 -230/208 7.0/7.5 1530/1480 - - 8.5/8.5 $138 - 4.0 310 USC 87 94
Cool with Electric Heat
UE08D11B 8000 3850 115 7.5 830 10.7 1230 9.6 $77 - 2.2 260 USC 73 79
UE10D33B 10000/9800 11200/9200 230/208 4.7/5.2 1060/1040 15.3/14.0 3500/2900 9.4/9.4 $96 - 3.2 285 USC 78 84
UE12D33B 11500/11200 11200/9200 230/208 5.6/6.0 1220/1190 15.3/14.0 3500/2900 9.4/9.4 $110 - 3.8 290 USC 80 87