FRO­NIUS AccuPocket 150/400 User manual

/ Perfect Welding / Solar Energy / Perfect Charging
/ Perfect Welding / Solar Energy / Perfect Charging
ACCUPOCKET 150/400
Quick reference
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online.
Setting values:
Arc-force dynamic: 0 - 100 | factory setting = 20
Welding current: 10 - 140 A (STICK), 3 - 150 A (TIG)
SoftStart / HotStart function: 0 - 200% | factory setting = 130%
TIG pulsing (only available with TIG version)
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Reserved for special programs
WELDING SETTINGS
42,0426,0246,EN 001-11082017
ACCUPOCKET 150/400
Quick reference
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online.
Setting values:
Arc-force dynamic: 0 - 100 | factory setting = 20
Welding current: 10 - 140 A (STICK), 3 - 150 A (TIG)
SoftStart / HotStart function: 0 - 200% | factory setting = 130%
TIG pulsing (only available with TIG version)
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Reserved for special programs
WELDING SETTINGS
42,0426,0246,EN 001-11082017

ACCESSING THE SETUP MENU
Setup menu - MMA welding Setup menu - Cel electrodes Setup menu - TIG
CHANGING WELDING PARAMETERS
Turn and press the adjusting dial to select and change parameters.
PARAMETERS FOR MMA WELDING
Starting current duration: 0.1 - 1.5 seconds |
0.5 seconds*
Anti-stick: On*/OFF
Break voltage: 25 - 80 V | 45 V*
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
* factory setting
PARAMETERS FOR TIG WELDING
Comfort Stop sensitivity: 0.3 - 2.0 V / OFF | 0.5
V*
Break voltage: 12 - 35 V | 15 V*
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
ACCESSING THE SETUP MENU
Setup menu - MMA welding Setup menu - Cel electrodes Setup menu - TIG
CHANGING WELDING PARAMETERS
Turn and press the adjusting dial to select and change parameters.
PARAMETERS FOR MMA WELDING
Starting current duration: 0.1 - 1.5 seconds |
0.5 seconds*
Anti-stick: On*/OFF
Break voltage: 25 - 80 V | 45 V*
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
* factory setting
PARAMETERS FOR TIG WELDING
Comfort Stop sensitivity: 0.3 - 2.0 V / OFF | 0.5
V*
Break voltage: 12 - 35 V | 15 V*
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting