Frontgate Callahan Bed Queen/King User manual

CALLAHAN BED QUEEN/KING
Page 1of 4
F R O N T G A T E
Date: Sept-2018

CALLAHAN BED QUEEN/KING
Page 2of 4
F R O N T G A T E
PART LIST BOX 1: PART LIST BOX 2:
HARDWARE ENCLOSED BOX 2:
Part #
Description
QTY
G
Screw
10 pcs
TOOLS NOT INCLUDED NUMBER OF PEOPLE TO INSTALL :
RECOMMENDED 2 OR MORE PERSONS
ASSEMBLY TIME:
UNDER 30 MINUTES
PRE ASSEMBLY INSTRUCTIONS :
1. Do not throw away packaging materials until the assembly is complete. Partsmay accidentally be
thrown away.
Part #
Description
QTY
A
Headboard
1 pc
B
Footboard
1 pc
Part #
Description
QTY
C
Side rails
2 pcs
D
Slats
5 pcs
E
Center Support Rail
1 Pc
F
Center Support Legs
2 pcs

CALLAHAN BED QUEEN/KING
Page 3of 4
F R O N T G A T E
ASSEMBLY INSTRUCTIONS:
STEP 1 :
- Hold Headboard (A) in vertical position tilted slightly forward. Attach each Side Rail (C) to the
Headboard (A) by inserting the hooked male hardware ends of the side Rail (C) into the
corresponding female hardware slots in the Headboard (A). Push down firmly on the top of the
Side Rail (C) until they seat themselves over the pins inside the legs slots.
- Repeat with Footboard (B)
.
Step 2:
STEP 2 :
-Assemble Center Support Legs (F) to the Center Supports Rail (E) by turning clockwise the
exposed threads on top of the legs to the insert nut on the Center Supports Rail.
C
A
E
F

CALLAHAN BED QUEEN/KING
Page 4of 4
F R O N T G A T E
STEP 3 :
-Attach the Center Support Rail (E) to the Headboard (A) & Footboard (B) by locking in the hooks.
Push down firmly. Adjust the levelers on the bottom of the support legs to ensure the Center
Support Rail is leveled and straight.
STEP 4 :
- Put the Slats (D) into the frame, making sure the ends of Slats rest at the ledge Apply the screw
using a Phillips head screwdriver
CARE &MAINTENANCE : Use mild detergent and water to clean. Always use a soft cloth for
wiping and cleaning. Do not use abrasive or acidic cleaners as these may mar or damage the
finish of your product. For additional care and cleaning information, please call one of our Product
Specialistsat 1-800-537-8484.
Please contact one of Our Product Specialists for assembly assistance orquestions at
1-800-537-8484 or email to [email protected]. Specialists are available weekdays 8:00 a.m. to
8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m. EST
I
C
D
G
E