Frontgate 62333 User manual

1 | Page
ITEM DESCRIPTION: NICKEL & MARBLE ENTERTAINING ÉTAGÈRE
Item # 62333
NOTE-In C section washer (A) is for over and under each of the glass shelves and
(B) and (C) are used for the marble base to tighten the base of legs to the marble.
STEP 1: Place all pieces out on a clean work surface. Please ensure all of the
above pieces are included in your package.
STEP 2: Place the marble base on a stable surface. Make sure all four round metal
balls are securely attached to the bottom side of the marble base. The ball feet are
already attached and no additional assembly is needed.
PLEASE NOTE: The legs of the étagère are comprised of 3 pieces: base, center
AND top portion with finial (AS SHOWN IN IMAGE SECTION “D”).
STEP 3: Take bottom section of the legs PART A/ SECTION D and place on the top
side of the marble base. Then on the underside of the marble tighten the base to
marble with the help of washer (b) and nut (c). Place washer on first and then the
nut and then tighten. Do this for each leg.
STEP 4: After fitting the bottom section of the legs place the first glass (B) through
the holes by using rubber washer (A) on both sides of the glass.

2 | Page
STEP 5: After placing the glass (B) we have to place middle section of the legs
(Part B/Section D) on the glass and twist clockwise to tighten. Do not over twist as it
may cause to glass to crack.
STEP 6: Now place the other glass shelf (B) on the middle section of the legs.
Please note that each time we place the glass on the brass leg we have to use a
rubber washer PART A/SECTION C on the top and below of the glass.

3 | Page
STEP 7: After placing the glass (B) we have to place top section of the legs with
finial Part C/Section D on the glass and twist clockwise to tighten. Please make sure
that a washer was placed between the glass and brass legs.
•Fully assembled pictures of the étagère
NOTE- USE ONLY ON A STABLE AND SECURE SURFACE. ENJOY!
CARE AND MAINTENANCE INSTRUCTIONS: DO NOT USE STEEL WOOL, ABRASIVE
CLEANERS, HARSH CHEMICALS, ETC. USE DRY SOFT CLOTH TO GENTLY CLEAN AND
POLISH.
Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or
email [email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday
9:30 a.m. to 6:00 p.m.