Frontgate Regency Bow User manual

34"H x 45"W x 19"D
148391
09/10/205
Regency Bow Front Chest// Black-High Gloss
5

4
Body (A)
Wrench (C)
LEGS (B)
c1
5

3
2
Using tool included, remove bolts and protective board from bottom of chest (See Figure 1)
(Figure 1)
Place Chest on back on top of a clean padded surface.
Remove Legs from bottom chest drawer (See Figure 2)
Step 4 - Attach legs by inserting into opening and turning clockwise (See Figure 3)
Step
Step
(Figure 2) (Figure 3)
5

5
Remove protective packaging and stand upright
5

WALL ANCHORING (ANTI-TIP) HARDWARE INSTALLATION
Attach two Brackets (C) horizontally to top back of Cabinet (F) using Small Screws (A). Screw
remaining Brackets vertically into wall 1 inch below Brackets attached to Cabinet using Large Screws (B).
Large Screws should be anchored into a WALL STUD.
Align Brackets vertically and string Retention Belt (D). Confirm Belt is securely laced and locked.
Ltr. Qty. Hardware Included
(A)
(B)
(D)
(C)
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
WALL BRACKET MUST BE ATTACHED TO WALL STUD
A2Small Screws
B2Large Screws
C2Brackets
D1Retention Belt
Represe
n
tativeFurnitureIt
e
m
Page 5 of 5
55