FujiFilm Sonosite PX System User manual

1
Sonosite PX System Battery Assembly Instructions
Inside the box
Installing the system battery
System batteries (2) Battery compartment cover (1) M3 x 8 mm Phillips-
head screws (6)
STEP 1 STEP 2
Access the system’s battery compartment. Place one of the batteries in the compartment as
shown, then plug its cable into the connector. Make
sure the cable is placed fully within the compartment.
STEP 3
Place the other battery in the compartment as
shown, then plug its cable into the connector.
Make sure the cable is placed fully within the
compartment.
STEP 4
Attach the battery compartment cover using a
Phillips screwdriver and the Phillips-head screws.*
*A magnetic bit driver and Phillips #1 bit are
available in the stand assembly kit.

2
SONOSITE is a registered trademark of FUJIFILM Sonosite, Inc. in various jurisdictions. FUJIFILM is a registered trademark of FUJIFILM
Corporation. Value from Innovation is a trademark of FUJIFILM Holdings America Corporation.
All other trademarks are the property of their respective owners.
Published April 2020
Copyright © 2020 FUJIFILM Sonosite, Inc. All rights reserved.
P27891-01
*P27891-01*
Manufacturer
FUJIFILM Sonosite, Inc.
21919 30th Drive SE
Bothell, WA 98021 USA
T: 1-888-482-9449 or
1-425-951-1200
F: 1-425-951-1201
EC Authorized
Representative
FUJIFILM Sonosite B.V.
Joop Geesinkweg 140
1114 AB Amsterdam,
The Netherlands
Australia Sponsor
FUJIFILM Sonosite Australasia Pty Ltd
114 Old Pittwater Road
BROOKVALE, NSW, 2100
Australia