FujiFilm FinePix Z10fd Manual

--- Notification Regarding Insertion of the Battery for the Fujifilm FinePix Z10fd ---
As indicated in the warnings and safety instructions originally provided with your camera packaging,
proper handling of Lithium-ion batteries is very important. The battery must be correctly inserted into
the camera slot to ensure proper operation of the camera.
If the battery is inserted incorrectly and forced into the slot, there is a potential for the battery to become
jammed in the camera. If the battery becomes jammed, please return the camera to FUJIFILM and we
will remove the battery and return it to you free of charge. You should not try to remove the battery by
force or by gripping it with any tools such as tweezers or pliers, since this can cause a Lithium-ion
battery to overheat or ignite.
Mail to:
Fujifilm Factory Service Center
Attn: Camera Repair Dept.
1100 King Georges Post Road
Edison, NJ 08837
The battery for the Z10fd should be inserted as per the instructions in the Owner’s Manual (Fig. 1). It is
important that the indicators are aligned properly to ensure correct insertion of the battery.
(Fig. 1)
For your convenience, if you prefer a simpler method, we have prepared a battery marked with an
orange stripe to match the orange color of the battery release catch making it even easier to insert the
battery into your camera (Fig. 2).

(Fig. 2)
If you currently have the battery without the orange stripe and would like the NP-45 battery with orange
marking (serial number required as proof of eligibility, see Fig. 3), please print on a 3x5 index card:
•Name
•Address
•Camera Serial Number (shown below in Fig. 3)
•Email Address
Mail to:
Z10 Battery
P.O. Box 15329, Dept BB
New Castle, DE 19720
(Fig. 3)
Or you can email your name, address and camera serial number to [email protected]. In the
subject line of the email, please type Z10 Battery.
For further information regarding the above, please contact:
1-800-800-FUJI option #1 or via email at [e-mail]
Thank you.
Fujifilm USA, Inc.