Fujitsu IdeaBoxx Jade User manual

The Jade IdeaBoxx includes all the hardware, tools and software needed to be up and running quickly. This Linux-based development system is future-proof.
The module hardware is compatible and interchangeable with System on Modules (SoMs) from the entire Fujitsu family of embedded GDC chips. The Jade SoM
can be removed and replaced with Emerald, Triton, or other future SoM modules.
Toolkit Includes:
• Hardware Module:
• PCB assembly, including:
• Jade SoM Board
• SoM Carrier Board
• LCD Adapter Board
• 7-inch backlit LCD with capacitive touch screen
• Peripherals including USB, SD card, Ethernet, Audio, and HDMI
• Power supply
• USB cable for console access
• Suite of Software Tools Included on the USB Stick:
• Demos created with Crank Software Storyboard Suite, including
both touch-interactive and self-running versions
• Datasheets and application notes for the Jade IdeaBoxx
• Libraries and tools free of charge and royalties
• Schematics and Altium Designer project files for all PCBs
• Gerber files to create reference design PCBs
• Linux BSP virtual appliance image, including:
• U-boot bootloader
• Linux kernel version 3.0.3
• Functional root file system
• GCC-based cross-compiler
• Works out-of-the-box with Storyboard Suite from Crank Software
• Download from http://www.cranksoftware.com/
Jade IdeaBoxx™
Quick Start Guide

12 11
10
9
7
6
5
4
3
8
1. LCD1 Output
2. LCD0 Output
3. 5-Way Joystick
4. HDMI Output
5. Reset Switch
6. Headphone Output
7. Line Level Output
8. Line Level Input
9. Ethernet
10. USB Connector
11. Power Switch
12. Power connector
13. Mini SD Slot
14. Micro USB
1 2
Getting Started Instructions:
Video Walkthrough Available at
(https://www.youtube.com/user/FujitsuSemiUS)
1. Remove all the items from the box.
2. Remove the protective film from the LCD screen.
3. Insert a MicroSD card containing relevant software or
graphic files into the MicroSD card slot on the bottom
of the carrier board.
4. Plug the power supply cable into the power supply
connector on the left side of the board.
5. Plug the power supply into a wall outlet.
6. Power up the board by turning on power at switch S3
on the left side of the board.
7. The demo on the MicroSD card will automatically start.
13 14
Bottom of Board
Top of Board
©2014 Fujitsu Semiconductor America, Inc.
All company and product names are trademarks or registered
trademarks of their respective owners.
Printed in the U.S.A. GDC-DKJ-QSG-21442-09/2014
FUJITSU SEMICONDUCTOR AMERICA, INC.
1250 E. Arques Avenue, M/S 333, Sunnyvale, CA 94085-5401
Tel: [phone] Fax: [phone]
[email protected] | http://us.fujitsu.com/semi
Follow Us: @FujitsuSemiUS
Connect With Us: https://www.facebook.com/FujitsuSemiconductorAmerica
View Us: http://www.youtube.com/FujitsuSemiUS