Fujitsu 467 User manual

Preliminary 1(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
Receiver: Info:
M. Carstens-Behrens mycable GmbH
Manual
467 / GDC Board
Version PA 3.5
May 14, 2008
http://www.fujitsu.com/emea/services/microelectronics

Preliminary 2(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01

Preliminary 3(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
Developer’s Manual for the 467 / GDC Board
Summary
This manual provides detailed technical information for system architects, hardware and
software developers, who wor with the 467 / GDC board version PA3 for evaluation and
development purpose.
Enclosures
None.
Product nformation
The 467 / GDC board is populated with the 32-bit CPU MB91F467DAPFV, Flash memory,
SDRAM, SRAM, interfaces as UART, Ethernet, CAN, USB, SD memory card, GPIOs, video
inputs and outputs and an interface for different GDC modules.
Up to now two GDC modules are available for this board, a module with the MINT and a
module with the LIME. For details see the manuals for these modules.

Preliminary 4(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
Revision History
Version Date Sign Description
PA 3.1 2008-03-25 mo Create this document
PA 3.2 2008-04-09 mo 2.2.3 CPU – Mode pin description added
PA 3.3 2008-05-05 mo 2.2.3 CPU – Internal comment removed
PA 3.4 2008-05-06 mo 2.2.3 CPU – Mode pin description corrected
PA 3.5 2008-05-14 mo Product name
Contact nformation
mycable GmbH
Michael Carstens-Behrens
( hardware and commercial )
Email [email protected]
Tel. [phone]

Preliminary 5(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
Table of Contents
1 OVERV EW.................................................................................................................... 6
1.1 Manual Scope........................................................................................................ 6
1.2 Putting into Operation............................................................................................. 6
2 467 / GDC BOARD..................................................................................................... 7
2.1 System Architecture............................................................................................... 7
2.2 Function Units........................................................................................................ 9
2.2.1 Power Supply............................................................................................... 10
2.2.2 Reset........................................................................................................... 10
2.2.3 CPU............................................................................................................. 11
2.2.4 Graphic Display Controller ( GDC ) Module.................................................. 14
2.2.5 Serial Ports................................................................................................... 19
2.2.6 Ethernet........................................................................................................ 20
2.2.7 Universal Serial Bus ( USB )........................................................................ 21
2.2.8 CAN Interfaces............................................................................................. 22
2.2.9 Video Inputs................................................................................................ 24
2.2.10 Video Outputs............................................................................................. 25
2.2.11 Buttons....................................................................................................... 29
2.2.12 LEDs......................................................................................................... 29
2.2.13 GPIOs ...................................................................................................... 30
2.2.14 Secure Digital ( SD ) Memory Card Interface............................................. 32
2.3 Hardware Variants................................................................................................ 33
2.4 Placement of Components................................................................................... 34
2.5 Mechanical Dimensions........................................................................................ 36

Preliminary 6(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
1 Overview
1.1 Manual Scope
This manual provides detailed technical information about the 467 / GDC board for system
architects, hardware and software developers covering:
•System architecture description and users manual
•Hardware architecture
•Mechanical information
It is the engineer’s reference for evaluation, system development and prototyping based on the
module. This document covers all available hardware versions regarding their configuration
options and revision state.
1.2 Putting into Operation
The 467 / GDC board can be used without GDC module.
But do not plug the GDC module if the power supply is
switched on !
Under this condition circuits can be damaged !
Details for power supply connection see chapter power supply.

Preliminary 7(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
2 467 / GDC Board
2.1 System Architecture
The system architecture of the 467 / GDC board is shown in picture 2-1.
Pic. 2-1: 467 / GDC board bloc diagram

Preliminary 8(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
Picture 2-2: 467 / GDC board top side
Picture 2-3: 467 / GDC board bottom side

Preliminary 9(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
2.2 Function Units
Overview in the available interfaces:
–10/100 Ethernet
–2x serial ports
–2x CAN
–DVI-I
–Power supply
–Video Input
–USB
–GPIOs
–Video Output
–SD Memory Card Slot
–GDC module interface

Preliminary 10(36)
Prepared Document Number
Manfred Ortmann
Approved Chec ed Date Revision Storage
2008-05-14 PA 3.5 Mycable01
2.2.1 Power Supply
Connect the 467 / GDC board with a power supply between 6 and 25 V DC and approximate 10
Watt at connector X100.
Be aware to use the correct polarity as shown in picture 2-4.
Pic. 2-4: Polarity of the 467 / GDC board power supply connector
A protection against wrong polarity ( D109 ) and overcurrent ( F100 ) is implemented but a too
high current can damage the power supply or can produce great heat !
Do not plug the GDC module when the power supply is on !
The required voltages + 3.3 V and + 5.0 V will be regulated from the dual switching power
regulator LT1940EFE-PBF from Linear Technologies ( U100 ) on the board.
2.2.2 Reset
The triple processor supervisor TPS3307-33DGN from Texas Instruments ( U102 ) generates
a power-on reset and monitors the + 3.3 and + 5.0 V power supply.
Also if the reset button SW100 will be pressed the supervisor circuit generates a reset.