Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD... User manual

i
DESKPOWER 6000/SD Series User’s Manual
Fujitsuendeavourstoensurethattheinformationinthisdocumentiscorrect,butacceptsnoliability
foranyerrororomissioninthesame.AnyproceduresdescribedinthisdocumentforoperatingFujitsu
productsshould beread andunderstood bythe operatorbefore suchproducts areused. Toensure
that Fujitsu products function without risk to safety and health, such procedures should be strictly
observed by the operator. The development of Fujitsu products and services is continuous and
published information may not be up to date. Any particular issue of a product may contain facilities
not described herein. It is important to check the current position with Fujitsu. Specifications and
statementsastoperformanceinthisdocumentareFujitsuestimatesintendedforgeneralguidance.
Theymayrequireadjustmentinparticularcircumstancesandshouldthereforenotbetakenasformal
offers or commitments.
DESKPOWERisatrademarkofFujitsuLimited.ThefollowingareregisteredtrademarksofMicrosoft
Corporation:MS, MS-DOS,Windows®NT, Windows®98,Windows Millennium,Window®2000 and
Windows XP.
Pentium®,CeleronandMMX™technologyaretrademarksofIntelCorporation.PhoenixandPhoenix
logo are registered trademarks of Phoenix Technologies, Ltd. Award is the registered trademark of
Award Software International Inc.
All other products are trademarks or registered trademarks of their respective companies.
© Copyright 2001 Fujitsu Limited. All rights reserved. No part of this publication may be copied,
reproduced,ortranslatedwithoutthepriorwrittenconsentofFujitsuLimited.Nopartofthispublication
may be stored or transmitted in any electronic form without the written consent of Fujitsu Limited.
DECLARATION OF CONFORMITY
according to FCC Part 15 Class B
Thisdevicecomplies with Part15ClassB of theFCCRules. Operations aresubjecttothe following
two conditions:
(1) This device may not be allowed to cause harmful interference, (2) This device must accept any
interference received, including interference that may cause undesired operation.
Wesbite: www.fujitsu-pc-asia.com
CHAPTER (INTRO) 11/17/01, 9:04 AM1

ii
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions carefully. Save these instructions for future reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Donotplacethisproductonanunstablecart,stand,ortable.Theproductmayfall,causingserious
damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it from overheating, these openings must not be
blockedorcovered.Theopeningsshouldneverbeblockedbyplacingtheproductonabed,sofa,
rug,orothersimilarsurface.Thisproductshouldneverbeplacednearoroveraradiatoror heat
register, or in a built-in installation unless proper ventilation is provided.
7. Thisproductshouldbeoperatedfromthetypeofpowerindicatedonthemarkinglabel.Ifyouare
not sure of the type of power available, consult your dealer or local power company.
8. Thisproductisequippedwitha3-wiregrounding-typeplug,aplughavingathird(grounding)pin.
Thiswillonlyplugintoagrounding-typepoweroutlet.Thisisasafetyfeature.Ifyouareunableto
inserttheplugintotheoutlet,contactyourelectriciantoreplaceyourobsoleteoutlet.Donotdefeat
the purpose of the grounding-type plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where persons will
walk on the cord.
10. If an extension cord is used with this product, make sure that the total ampere rating of the
equipment plugged into the extension cord does not exceed the extension cord ampere rating.
Also, make sure that the total rating of all products plugged into the wall outlet does not exceed
15 amperes.
11. Neverpushobjectsofanykindintothisproductthroughcabinetslotsastheymaytouchdangerous
voltagepointsthatcouldresultinafireorelectricshock.Neverspillliquidofanykindontheproduct.
12. Donot attempt toservice this productyourself, as openingor removing coversmay expose you
to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
CHAPTER (INTRO) 11/15/01, 2:34 PM2

iii
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. Iftheproductdoesnotoperatenormallywhentheoperatinginstructionsarefollowed.Adjust
onlythosecontrolsthatarecoveredbytheoperatinginstructionssinceimproperadjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the product to normal condition.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for service.
14. CAUTION.Whenreplacingthebattery,besuretoinstallitwiththepolaritiesinthecorrect
position.There isa dangerof explosionifthe batteryis replacedwith anincorrecttype or
is mistreated. Do not recharge, disassemble or dispose of in fire. Replace only with the
same or equivalent type recommeded by the manufacturer. Dispose of the used battery
according to the manufacturer’s instructions.
15. Useonlythepropertypeofpowersupplycordset(providedinyouraccessoriesbox)forthisunit.
Itshouldbeadetachabletype:ULlisted/CSAcertified,BS1363,ASTA,SS145certified,rated10A
250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).
16. NOTE:
PleasetakeextraprecautionwhenconnectingtheLANcable;donotconnecttheLANcable
to the peripheral device’s connector, that might have excessive voltage.
CHAPTER (INTRO) 11/15/01, 2:34 PM3

iv
Before reading this manual
This section describes safety precautions and convention used in this manual. Be sure to read this.
For your safety
This manual contains important information for using your computer safely and correctly.
Readthismanualcarefullybeforeusingyourcomputer.Inparticular,SafetyPrecautionsmustbe
read and understood.
Safety Precautions and this manual must be readily available at all times.
Thisproductconformsto the standard ofpersonalcomputerindustry(PC-11-1988) of the Japan
Electronics and Information Technology Industries Association.
Note
ThisproductisaClassBInformationTechnologyEquipmentandconformstothestandardsetby
the Voluntary Control Council for Interference by Technology Equipment (VCCI).This product is
designed to be used in a domestic environment, however, it may cause radio interference when
used in the vicinity of a radio or television receiver.
Make sure that you read the manual when using this product.
Fujitsu as a member of the International Energy Star Program, recognizes that
this equipment is compliant with the standard of the International Energy Star
Program.
The International Energy Star Program is a worldwide program for promoting
energy saving for computers and other office equipment. The program aims at
promoting the development and use of products equipped with the functions that can effectively
reduce energy consumption and uses a voluntary system that allows enterprises to join at their
owndiscretion.Thetargetproductsincludeofficeequipment,suchascomputers,displays,printers,
facsimiles,andcopyingmachines.Thestandardsforindividualtypesofequipmentandthemark
() prepared by the Program are used commonly among member countries.
Theenergysavingfunctionoftheproducts,however,maynotbeuseddue tothelimitationofthe
operating system (Windows NT, etc. ).
CHAPTER (INTRO) 11/15/01, 2:34 PM4

v
Using this Product for High-Safety Applications
This product is for general office, personal, home, and other general use. It is not designed and
manufactured for use in high-safety applications.
Do not use this product for such applications without taking measures to satisfy the high-safety
requirements.High-safetyapplicationsrequireextremelyhighlevelofsafety,andinvolveserious
hazards to life and health if the required safety is not assured. High-safety applications include
the following.
●Nuclearreactioncontrolinthenuclearfacility,automaticflightcontrol,airtrafficcontrol,mass-
transportation control, life supporting medical equipment, weapon launch control, etc.
Thisproduct containsparts having limitedlife (CRT,liquid crystal display,hard disk,etc.), which
may need earlier replacement when used continuously.
About Data Backup
Thecustomerisresponsiblefortakingnecessarymeasure,suchascreating the backup data, to
maintainthedatarecordedinthisproduct(includingthebasicsoftwareandapplicationsoftware.).
Whenyouhave your computerserviced,the data containedinit may belost.Make sure thatyou
create the backup data or take other necessary measures beforehand.
When the data is lost, Fujitsu does not take responsibility for any damage caused by the loss of
data,andnoguaranteeisprovidedformaintenanceorrecoveryofthelostdata,unlessitisstipulated
otherwise in the warranty certificate.
This computer is designed for use within the country. If you are using it abroad, please do so on
your own responsibility.
Thisequipment may beadverselyaffectedbythemomentarydropof the suppliedvoltagedueto
lighting. Use of an AC uninterruptible power supply is recommended for measures against the
momentary drop of the supplied voltage.
(This message is based on the Japan Electronics and Information Technology Industries
Association guidelines for measures against momentary voltage drop in PCs).
This computer contains Specific Goods subject to the the Foreign Exchange and Foreign Trade
Control Law. You may need to obtain a permit based on this law to export this computer.
CHAPTER (INTRO) 11/15/01, 2:34 PM5

vi
License Agreement
Fujitsu Limited (Fujitsu) permits you to use software installed or attached to this computer
(SOFTWARE), provided that you agree to the following Software License Agreement.
BystartingtousetheSOFTWARE,youareagreeingtobeboundbythetermsofthisagreement.
MakesurethatyoureadthefollowingSoftwareLicenseAgreementbeforeusingtheSOFTWARE.
IfaSOFTWARE product included intheSOFTWAREproducts provided with thisproducthasits
own License or License Agreement, then such License or License Agreement may replace the
license herein.
Software License Agreement
1. Use of SOFTWARE and copyright
You are permitted to use the SOFTWARE, using this computer inside Japan. You are only
grantedthesoftwarelicensewhenyoupurchasethecomputer,andtheSOFTWAREcopyright
is owned by Fujitsu or the third party developer.
2. Backup
You may make one copy media of the SOFTWARE as a reserve (backup).
3. Integrating the SOFTWARE into other software
WhentheSOFTWAREisdesignedtobeintegratedinothersoftware,youmayintegrateapart
of or the whole SOFTWARE into other software, following the instruction described in the
document.
4. Copyright
(1) You may copy the SOFTWARE when meeting the conditions stipulated in the above item 2 and 3.
You may not copy the software in which this SOFTWARE is integrated except when making a reserve
(backup) media, unless the document stipulates that you are permitted to copy such software.
You may not, however, copy the SOFTWARE, if it has a copy protection mechanism.
(2) WhencopyingtheSOFTWAREaccordingtotheitemabove,youmaynotalter,deleteorhidethecopyright
notice attached the SOFTWARE.
5. Transfer to the third party
YoumaytransfertheSOFTWARE(includingthemediaattachedtothecomputer,documents,
and reserve backup media) to another party, provided that you transfer the computer with all
the SOFTWARE installed in it. You may not transfer the media attached to the computer to
another party without the computer.
6. Modification
You may not modify, decompile, disassemble, or reverse engineer the SOFTWARE.
7. Limited Warranty
(1) Fujitsu provides corrective information that Fujitsu finds it necessary against the discrepancy, if any,
foundbetweentheSOFTWAREandthemanual,ontherequestofthecustomerwithinaperiodofninety
(90)daysfromthedateofpurchase,Inaddition,Fujitsureplacesdefectiveproductswithfunctionalones,
ifphysical defects (damages) are foundinthestoragemediaoftheSOFTWARE,withinaperiodofone
month from the date of purchase.
(2) Fujitsuacceptsnoresponsibilityforanydamages(including,withoutlimitation,lossofbusinessprofits,
business interruption, loss of business information, and other pecuniary damages) arising out of the
useor inabilityto use the SOFTWARE, exceptthe responsibilitystipulated inthe previous item. This is
true also when Fujitsu has been advised of the possibility of such damages.
(3) Fujitsuprovidesthewarrantytothesoftware,whichhasbeendevelopedbythethirdpartyandincluded
intheSOFTWARE,withinthescopedescribedintheitem(1)above,andthethirdpartydeveloperaccepts
no responsibility for the SOFTWARE.
8. High-Safety
ThisSOFTWAREisforgeneraloffice,personal,home,normalindustrialandothergeneraluse.
It is not designed and manufactured for use in high-safety applications.Do not use this
SOFTWARE for such applications without taking measures to satisfy the high-safety
requirements.High-safetyapplicationsrequireextremelyhighlevelofsafety,andinvolveserious
hazardstolifeandhealthiftherequiredsafetyisnotassured.High-safetyapplicationsinclude
the following. High-Safety Applications
Nuclear reaction control, flight control, air traffic control, mass-transportation control, life
supporting equipment, weapon launch control, etc. Fujitsu Limited
CHAPTER (INTRO) 11/15/01, 2:34 PM6

vii
Microsoft Products Service Pack
MicrosoftCorporationprovidestheuserofMicrosoft®Windows®withtheServicePackforstable
use of the operating system (http://www.microsoft.com).
TheusermayapplythelatestServicePackprovidedbyMicrosofttohavethemoststablesystem
withthecurrentWindows®.Therefore,FujitsubasicallyrecommendtheuseofthelatestService
Pack available.
The Service Pack, however, may cause unpredictable results when it is applied, depending on
yourenvironment. Make surethat you readthe Readme.txt attachedto the ServicePack before
applying it.
Also we recommend that you make a backup copy of the system, in case your installation fail.
CHAPTER (INTRO) 11/15/01, 2:34 PM7

viii
Conventions used in this manual
Warning messages
Thismanualusesvarioussigns.Thesesignsurgetheusertousetheequipmentsafelysoastoprevent
personal injury and/or property damage. The following shows alert signals and explanations. The
signs should be understood before proceeding to subsequent portions of this manual.
Thisindicateahazardoussituationthatcouldresultindeathorsevereinjury
if the user does not perform the procedure correctly.
This indicate a hazardous situation that could result in personal injury or
property damage if the user does not perform the procedure correctly.
Inadditiontotheabovesigns,thefollowingsymbolsareusedtoprovidedetailedinformationconcerning
personal injury and/or property damage:
The symbol marked with [ ] indicates a warning or caution item. An
explanation of an alert is presented in or beside the symbol.
Thesymbolmarkedwith[ ]indicateswhatmustbenotbedone(prohibited
action). The specific action that is prohibited is indicated in or next to the
symbol.
Thesymbolmarked with [●]indicates whatmustbe observed. Thespecific
instruction is indicated in or next to the symbol.
Symbols used in the text
The following symbols are used in the text of this manual.
This symbol carries a statement indicating cautions and prohibited
actions. Be sure to read this.
This symbol carries a statement indicating requirements to operate
hardware or software correctly. Be sure to read this.
This symbol indicates the reference page and/or reference manual.
Representation of keys and their operation method
In this manual, keys are not represented with the characters as appearing on the keyboard, but are
represented in the following way:
Example: [Ctrl] key, [Enter] key, [→] key...
Two or more keys that must be pressed simultaneously are represented by combining them with a
“+” sign as follows:
Example: [Ctrl] + [F3] keys, [Shift] + [↑] keys...
WARNING
CAUTION
Point
Important
→
CHAPTER (INTRO) 11/15/01, 2:34 PM8

ix
Command entry (key entry)
A command entry is represented in this manual as follows:
diskcopy a: a:
↑↑
• Where character spacing is provided as shown by [↑], press the [Space] key once.
Commands, an example of which is given above in lowercase, can be entered in uppercase.
• [CD-ROM drive] indicate the name of the CD-ROM drive being used. Enter the drive name
inaccordance with your PC environment.
[CD-ROM drive]:\setup.exe
Sample screens and illustrations
Thescreenorillustrationisoneoftheexamples.Dependingonthemachineyouuse,theactualscreen,
illustration,andfilenamemaybedifferentfromtheexample.Theillustrationmaybesimplifiedforthe
purpose of explanation, and it may not indicate the cables that are used in reality.
Representation of continuous operation
Continuous operation steps are represented in this manual by combining them with a “→” sign as
shown below:
Example: Continuous operation of clicking [Start], [Programs] and [Accessories]
↓
Click [Start] →[Programs]→[Accessories]
Representation of BIOS Setup
FortheBIOSSetupprocedure,amenu,submenu,anditemmaybeconnectedwithahyphentoindicate
continuous selection as follows:
Example: Set [Serial Port 1] under [Advanced] to [Disable].
↓
[Advanced] →[Serial Port 1]: Disable
Floppy disk drive, CD-ROM drive
IfyourmodeldoesnothaveafloppydriveorCD-ROMdrive,youneedtopurchasetheseperipheral
devices separately to use the drive.
Forinformationaboutusing the peripheral device,seethedocumentthatcomes with theperipheral
device.
CHAPTER (INTRO) 11/15/01, 2:34 PM9

x
Description of products
The following list shows the product and its description in the manual.
In addition, this manual also gives information for other operating systems.
Description of products Description used in the manual
Microsoft®Windows®2000 Professional Windows 2000
Microsoft®Windows®XP Home or Professional Windows XP
Microsoft®Windows NT®Workstation Operating System Version 4.0 Windows NT
Microsoft®Windows®Millennium Edition Windows Me
Microsoft®Windows®98 operating system SECOND EDITION Windows 98
Microsoft®MS-DOS®operating system MS-DOS
Note: Descriptions such as Windows 2000/NT/Me/98 are used.
Warning and caution labels
The following warning and caution labels are affixed to this computer.
Do not remove or damage these labels.
Windows*
CHAPTER (INTRO) 11/15/01, 2:34 PM10

xi
Disposing of the computer
Disposing of the computer
To dispose of a computer (including accessories without LCD), you need to follow the local Waste
Disposal and Public Cleaning Law.
●For corporate and business users
To dispose of a computer, you need to ask an authorized industrial waste disposal contractor, as
the computer is part of the industrial waste.
●For individual customers
Todisposeofacomputer,youneedtofollowlocalordinancesorregulationsaboutwastetreatment,
as the computer is part of the general waste.
Disposing of a liquid crystal display
A liquid crystal display contains mercury in its fluorescent tube.
Todisposeofaliquidcrystaldisplay,youneedtofollowthe localWasteDisposalandPublicCleaning
Law.
●For corporate and business users
To dispose of a liquid crystal display, you need to ask an authorized industrial waste disposal
contractor, as the computer is part of the industrial waste.
●For individual customers
Todisposeofaliquidcrystaldisplay,youneedtofollowlocalordinancesorregulationsaboutwaste
treatment, as the computer is part of the general waste.
Disposing of used atteries
Wireless keyboards and wireless mice have batteries, and they may explode when they are put in
fire.
Todisposeofausedbatteries,youneedtofollowthe localWasteDisposalandPublicCleaningLaw.
●For corporate and business users
To dispose of used batteries, you need to ask an authorized industrial waste disposal contractor,
as the computer is part of the industrial waste.
●For individual customers
To dispose of used batteries, you need to follow local ordinances or regulations about waste
treatment, as the computer is part of the general waste.
CHAPTER (INTRO) 11/15/01, 2:34 PM11

xii
Warning and caution labels
Your PC bears the warning and caution labels as shown below.
Never detach or soil the warning or caution labels.
Rear surface of the equipment
ATTENTION
115V of voltage switch in the power supply corresponds to 100-200V
230V of voltage switch in the power supply corresponds to 200-240V
WARNING
• Before starting to mount or dismount an optional unit for your PC, switch off
thePCandallunitslinkedtoit,andunplugthemfromtheirrespectiveoutlets.
Otherwise, electric shock may occur.
FUJITSU LIMITED
DESKPOWER
MODEL FPC-LAE482
P/N CP102250-01
DC 20V
LISTED
UL1950
7J61
UL
®
TN
6A
WARNING
When removing exterior parts in order to
mount option parts or others inside the
cabinet, switch off the power supply
for PC unit and peripheral devices
linked with it, and disconnect the power
cable from outlet before working to
avoid risk of electric shock.
Electric shock
MADE IN JAPAN
CHAPTER (INTRO) 11/15/01, 2:34 PM12

xiii
Chapter 1Parts Name
This chapter describes the name of parts and function.
Chapter 2Basic Operations
Thissectiondescribesthelocationofinstallationandinstallationofthecomputer.
Chapter 3Hardware
This chapter describes basic steps and information that you need when using
the computer.
Chapter 4Expansion
This section describes the location and installation of the computer.
Chapter 5Technical Information
This chapter describes the specifications of this computer.
Manualconfiguration
CHAPTER (INTRO) 11/15/01, 2:34 PM13

xiv
Contents
CHAPTER 1 Parts Name
1 Part Names and Functions ..............................................................2
Front view ......................................................................................................... 2
Side view .......................................................................................................... 4
Rear view ......................................................................................................... 5
CHAPTER 2 Basic Operations
1 Installation.........................................................................................8
Location of installation...................................................................................... 8
Example of installation ..................................................................................... 8
2 Connection ........................................................................................9
Connecting the keyboard/mouse/power cord/grounding................................ 10
3 Touch Panel Unit Operating Instructions .....................................13
Contents......................................................................................................... 13
Operation ofTouch Panel ............................................................................... 13
Device Driver for Touch Panel Unit................................................................. 15
How to Uninstall Driver................................................................................... 16
How to Install Calibration Utility Tool .............................................................. 18
Notice ............................................................................................................. 18
4 Swivel Unit Operating Instructions ...............................................19
Safety Precaution ........................................................................................... 19
Caution for Operation ..................................................................................... 22
Specification................................................................................................... 22
3 Power on ..........................................................................................23
Cautions ......................................................................................................... 23
How to power on ............................................................................................ 23
4 Setting up ........................................................................................25
Considerations ............................................................................................... 25
Setting up Windows 2000/XP......................................................................... 26
Setting up Windows NT.................................................................................. 28
Setting up Windows Me/98............................................................................. 30
Problems during setup ................................................................................... 31
5 Turn off the computer.....................................................................32
Cautions ......................................................................................................... 32
How to turn off the power ............................................................................... 32
CHAPTER (TOC) 11/16/01, 6:59 PM14

xv
CHAPTER 3 Hardware 33
1 Mouse ..............................................................................................34
Using the mouse ............................................................................................34
2 Keyboard .........................................................................................36
3 CD.....................................................................................................38
Handling guidelines........................................................................................ 38
Insert/Eject a CD ............................................................................................ 39
4 Floppy Disk .....................................................................................41
Handling guidelines........................................................................................ 41
Insert/Eject a floppy disk ................................................................................ 41
5 Hard Disk .........................................................................................43
Cautions ......................................................................................................... 43
6 PC Card............................................................................................44
Handling guidelines........................................................................................ 44
Setting a PC card ........................................................................................... 45
Eject a PC card .............................................................................................. 46
7 Cleaning Hardware .........................................................................50
Cleaning the computer ................................................................................... 50
Cleaning the mouse ....................................................................................... 50
Cleaning the keyboard ................................................................................... 51
Cleaning a CD................................................................................................ 51
Cleaning the floppy disk drive ........................................................................ 51
For Windows 2000/NT/Me/XP models ........................................................... 52
CHAPTER 4 Expansion
1 Before connecting any peripheral devices...................................54
Handling guidelines........................................................................................ 54
2 Installing Memory ...........................................................................56
Location of Memory ....................................................................................... 57
Supported Memory ........................................................................................ 57
Installing Memory ........................................................................................... 58
CHAPTER 5 Technical Information61
1 List of Specifications......................................................................62
Computer specifications................................................................................. 62
LAN adapter specifications ............................................................................ 63
Sound specifications ...................................................................................... 63
Graphics specifications .................................................................................. 63
CHAPTER (TOC) 11/15/01, 2:43 PM15

CHAPTER 1
Parts Name
CHAPTER 1 (01-06) 11/15/01, 2:43 PM1

2
1 PartNamesandFunctions
This section describes the names of computer parts and their function.
■Front view
1
2
3
4
5
6
7
8
9
10
11
12
13
1 Liquid crystal display
Displays the screen.
2 Disk access lamp
This lamp lights up when the computer is writing data on the hard disk, or reading data from the
hard disk or CD-ROM drive.
3 Stanby lamp
This lamp lights up in orange when the computer is in the standby mode (energy saving mode).
CHAPTER 1 (01-06) 11/15/01, 2:43 PM2

3
4 Power lamp
This lamp lights green when the computer is on.
It does not light in the standby mode (energy saving mode).
5 Power button
Press this to turn on the computer or to put the computer in the standby mode.
6 Speaker
Provides sound output from the computer.


Point
No speaker volume control is available.
AfterstartingWindows,Click[Start]→ [Programs]→ [Accessories]→ [Entertainment]→ [Volume
Control], and make adjustments.
7 Brightness control
Adjust the brightness of the liquid crystal display. Turn it clockwise to increase the display
brightness, and counterclockwise to decrease brightness.
8 CD eject button
PressthistoejecttheCD-ROMormusicCD.Thisisfunctionalonlywhenthecomputerison.Do
not press this while the CD access lamp is on.
9 CD access lamp
This lamp lights up while reading the data from a CD-ROM or while replaying a music CD.
10 CD-ROM drive
Reads data and programs from a CD-ROM and replays a music CD.
11 Floppy disk access lamp
This lamp lights up while writing data onto or reading data from a floppy disk.
12 Floppy disk drive
For writing or reading data from a floppy disk.
13 Floppy disk eject button
Press this to eject the floppy disk.
Do not press this while the floppy disk access lamp is on.
CHAPTER 1 (01-06) 11/15/01, 2:43 PM3

4
■Side view
4
6
5
1
2
3
1 Microphone jack
Use a commercial electrostatic microphone.
2 Headphone jack
Use a commercial headphone.
3 USB connectors
Connects a USB standard peripheral device.
4 PC card slot
A slot to set and operate a PC card. It has two dummy cards inserted when you purchase the
computer.
5 PC card eject button
Press this to eject the PC card.
6 DC-IN connector
Connect the AC adapter.
CHAPTER 1 (01-06) 11/15/01, 2:43 PM4

5
■Rear view
1
2
3
4
5
6
7
8
9
1 Theft protection lock
A commercial theft protection wire can be used.


Point
The theft protection lock supports the MicroSaver Security System from Kensington.
2 Line out terminal
A sound output terminal.Connects a line in terminal of the audio device.
If you are connecting a speaker directly to this terminal, use one with a built-in amplifier.
3 Line in terminal
A sound input terminal. Connects a line out terminal of the audio device.
4 USB connectors
Connects a USB standard device.
CHAPTER 1 (01-06) 11/15/01, 2:43 PM5