Fujitsu ESPRIMO X956 User manual

System
Operating Manual
FUJITSU Desktop
ESPRIMO X956 / X956/T

Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk (see Service Desk list or from the Internet at:
"http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!

Published by / Contact address in the EU
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"http://www.fujitsu.com/fts/"
Copyright
©Fujits
u Technology Solutions GmbH 2015. All rights reserved.
Publication Date
12/2015
Order No.: A26361-K1035-Z320-1-7619, edition 1

FUJITSU Desktop
ESPRIMO X956 / X956/T
Operating Manual
Your ESPRIMO 5
Ports and operating elements 7
Important notes 11
Getting started 18
Operation 29
Troubleshooting and tips 48
Technical data 54
Index 55

Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited
or its subsidiaries in the USA and other countries.
Kensington and Microsaver are registered trademarks of ACCO Brands.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the USA and/or other countries.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of
such technology outside of this product is prohibited without a license from Microsoft.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.

Contents
Contents
YourESPRIMO ......................................................................... 5
Validityof the Reference Manual ......................................................... 5
Furtherinformation ...................................................................... 5
Notational conventions .................................................................. 6
Ports and operating elements ......................................................... 7
Front ................................................................................... 7
Leftside ................................................................................ 8
Right-hand side . . . ...................................................................... 9
Rear ................................................................................... 10
Important notes ........................................................................ 11
General safetynotes .................................................................... 11
Safetynotesforthe system .............................................................. 12
Powercable ............................................................................ 13
Transportingthedevice .................................................................. 13
Cleaning thedevice ..................................................................... 13
Energy saving,disposalandrecycling .................................................... 13
Explanatory information about standard ISO 9241-307 . .................................... 14
CEmarking ............................................................................ 15
FCCComplianceStatement ............................................................. 16
FCCClass BComplianceStatement .................................................. 16
FCCRadiationExposureStatement .................................................. 16
Disposal andrecycling .................................................................. 17
Getting started ......................................................................... 18
Unpacking andcheckingthe delivery ..................................................... 18
Steps for initialsetup .................................................................... 18
Setting up thedevice .................................................................... 19
Setting up an ergonomic video workstation ............................................ 19
Setting up thePC ................................................................... 21
Adjusting height ..................................................................... 22
Adjusting theinclination .............................................................. 22
Connectingthe powercable ............................................................. 23
Connectingexternaldevices ............................................................. 24
Connectingthe cables ............................................................... 24
Disconnectingthe cables ............................................................ 24
Ports on thedevice .................................................................. 25
ConnectingaUSBmouse ............................................................ 25
Connecting a USB keyboard . . ....................................................... 25
Connectingexternaldevices to theUSB ports ......................................... 25
Connectingan externalmonitor ....................................................... 26
Connectingexternalaudiodevices .................................................... 26
Switching on for the firsttime:installingthesoftware ....................................... 27
Switchingthe deviceon .............................................................. 28
Installingthe software ............................................................... 28
Operation .............................................................................. 29
Switchthe deviceon .................................................................... 29
Switching offthedevice ................................................................. 29
Procedure in an emergency . . . ....................................................... 29
LCDscreen ............................................................................ 30
Fujitsu 3

Contents
Changing the monitor settings with the buttons of the control panel . . . ................... 30
Changing the monitor settings using the OSD menu . . .................................. 32
Adjusting thebrightness andcontrast ................................................. 34
Selecting theapplication mode ....................................................... 34
Adjusting thepicturesizeand position ................................................ 34
Settingcolourtemperatureandcolours ................................................ 34
Setting the appearance of the OSD menu ............................................. 35
Settingfunctions .................................................................... 35
Displayinginformation ............................................................... 35
Notes on ergonomic colour adjustment . . . ............................................. 36
Preset operating modes . ............................................................ 36
Indicatorson thedevice ................................................................. 37
Keyboard ............................................................................... 38
Important keys and keyboard shortcuts . . . ............................................. 38
Multimedia module (optional) . ............................................................ 40
Yourmultimediamodule ............................................................. 40
Presencesensor ........................................................................ 42
Wireless LAN/Bluetooth radio components (optional) . . . . . .................................. 43
Switching the wireless components on and off ......................................... 43
Settingsin BIOSSetupUtility ............................................................ 43
Startingthe BIOSSetup Utility ........................................................ 44
Operating BIOSSetup Utility ......................................................... 44
ExitingBIOS Setup Utility ............................................................ 44
Propertyand dataprotection ............................................................. 44
Usingthe SecurityLock .............................................................. 45
BIOSSetupsecurity functions ........................................................ 46
SmartCard reader (optional) . . ........................................................ 47
Troubleshootingand tips .............................................................. 48
Helpif problemsoccur ................................................................... 48
Troubleshooting . . ....................................................................... 48
Power-on indicatorremains unlitafteryouhave switchedon yourdevice ................. 48
The device cannot be switched off with the ON/OFF switch. . . .......................... 49
Monitorremainsblank ............................................................... 49
Theexternalmonitor remainsblank ................................................... 50
Theexternalmonitor isblankor theimage isunstable .................................. 50
Nomousepointerdisplayedon thescreen ............................................ 51
Time and/or date is not correct . . . . . . ................................................. 51
SmartCard reader is not recognised. . ................................................. 51
SmartCard PINforgotten ............................................................. 51
SmartCard lost ...................................................................... 52
User and/or supervisor SmartCard lost . . ............................................. 52
Errormessageson thescreen ........................................................ 52
Installingnewsoftware .................................................................. 52
Restoring thehard diskcontents ......................................................... 52
Tips .................................................................................... 53
Technicaldata ......................................................................... 54
Index .................................................................................. 55
4Fujitsu

Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels, which differ in terms of
hardware and software equipment.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the chosen configuration
level, some of the hardware components described may not be available on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows).
Further information on this device is provided:
• in the "Quick Start Guide" poster
• in the "Safety/regulations" manual
• in the "Warranty" manual
• in the "BIOS Setup" manual
• in the operating manual for the monitor
• in the manual for the mainboard
• in your operating system documentation
• in the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP)
ValidityoftheReferenceManual
This Reference Manual is valid for the following systems:
• FUJITSU Desktop ESPRIMO X956
•FUJITSUDes
ktop ESPRIMO X956/T
Further information
For ergonomic reasons, we recommend a screen resolution of 1920 x 1080 pixels.
Because of the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Fujitsu 5

Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6Fujitsu

Ports and operating elements
Ports and operating elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself with these components before starting to work with your device.
Front
21
1=Butt
ons for the OSD menu
(On-Screen-display)
2=ON/O
FF switch
Fujitsu 7

Ports and operating elements
Left side
MicrophoneportHeadphonesportExpressCardslotUSB port
1234
1 = SmartCard reader
2 = USB ports (USB 3.0)
3 = Microphone port
4 = Headphones port
8Fujitsu

Ports and operating elements
Right-hand side
SecurityLockdevice
1
1 = Security Lock device / BIOS
Recovery button
The internal BIOS Recovery button can be actuated through the Security Lock
device and protected against misuse by securing the Kensington lock.
Fujitsu 9

Ports and operating elements
Rear
124563
1 = Power connection (AC IN)
2 = DisplayPort
3 = USB ports (USB 3.0)
4 = LAN port
5 = Multimedia module connectivity
6 = Security Lock device
10 Fujitsu

Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
General safety notes
SafetyinformationNote
Please note the information provided in the "Safety/regulations" manual
and in the following safety notes.
When installing and operating the device, please observe the notes on
environmental conditions in Chapter "Technical data", Page 54 as well as
the instructions in Chapter "Getting started", Page 18.
When setting up the device, make sure there is clearance all around it so that
thecasingreceivesenough ventilation. In order to avoid overheating, do not
cover the ventilation areas of the monitor or the device.
You must only operate the device if the rated voltage used by the
device is set to the local mains voltage.
You must remove the power plug from the power socket so that the
mains voltage is completely disconnected.
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
Repair work, system enhancements or hardware upgrades to the device should only
be carried out by qualified technicians. Unauthorised opening or incorrect repairs,
system enhancements or hardware upgrades could put the user at great risk (electric
shock, risk offire) or cause serious damage to the equipment.
Only operate the device with the casing closed.
Fujitsu 11

Important notes
Safety notes for the system
This device complies with the relevant safety regulations for data processing equipment,
including electronic office machines for use in an office environment. If you have
any questions about whether the device can be used in the intended environment,
please contact your sales office or our Service Desk.
• The display surface of the device is sensitive to pressure and scratches. You should therefore
be careful with the display surface in order to avoid lasting damage (scratches).
• If the device is brought into the installation site from a cold environment, condensation
can form. Before operating the device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
• When installing and operating the device, please observe the notes on ambient
conditions in "Technical data", Page 54 and the instructions in "Setting up
an ergonomic video workstation", Page 19.
• To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear.
• The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Make sure that the local mains voltage is neither higher nor lower than this range.
• Ensure that the power socket on the device and the mains outlet are freely accessible.
• The on/off switch does not disconnect the device from the mains voltage. To completely
disconnect from the mains voltage, you must remove the mains plug from the mains socket.
• The device is equipped with a power cable that complies with safety standards.
• Use the supplied power cable only.
• Lay the cables in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant notes
in chapter "Connecting external devices", Page 24.
• No data transfer cables should be connected or disconnected during a thunderstorm.
• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the device (danger of electric shock, short circuit).
• The device is not waterproof! Never immerse the device in water and protect
it from spray water (rain, sea water).
• In an emergency (e.g. damaged casing, operation controls or cables, penetration
of liquids or foreign matter), switch off the device, disconnect the power plug
and contact your sales outlet or our Service Desk.
• Only set the resolution and refresh rates that are indicated in chapter "Technical
data", Page 54. If you set other values, you may damage the device. If you are
in any doubt, contact your sales outlet or our Service Desk.
• Use a screen saver with moving images and activate the power management for
your monitor to prevent still images from "burning in".
• We recommend that you place your device on a durable, non-slip surface. In view
of the many different finishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
12 Fujitsu

Important notes
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
• The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
• The cable has to be HAR-certified or VDE-certified. The mark HAR or
VDE will appear on the outer sheath.
• For devices which are mounted on a desk or table, type SVT or SJT cable sets may be
used. For devices which sit on the floor, only SJT type cable sets may be used.
• The cable set must be selected according to the rated current for your device.
• If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
Device,Tran sporta tionRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be
used, condensation may occur. To avoid damaging the device, wait until it has
reached room temperature and is absolutely dry before initial startup.
Cleaning the device
Device,Tran sporta tionRetransportationSystemunit,see De vice
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface of the monitor is sensitive to pressure and scratches. Clean
it only using a soft, slightly moistened cloth.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD
You canfind information on these subjects on the DVD "Drivers & Utilities", the recovery DVD
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
Fujitsu 13

Important notes
Explanatory information about standard ISO 9241-307
Permanently unlit or lit pixels
Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending
on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display.
Subpixel A subpixel is a separately addressable internal structure within a pixel that
enhances the pixel function.
The maximum permitted number of faulty pixels is stipulated in the international standard ISO
9241-307. In accordance with standard ISO 9241-3, LCD displays by Fujitsu comply with Class II
for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher.
Examples:
Aflat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel
consists of three subpixels (red, green and blue), so there are almost 3.9 million subpixels in total.
According to ISO 9241-3 (Class II), a maximum of 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
Aflat-screen monitor with a resolution of 1920 x 1080 has 1920 x 1080 = 2073600 pixels. Each pixel
consists of three subpixels (red, green and blue), so there are almost 6.2 million subpixels in total.
According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 unlit pixels plus 5 lit or 10 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
14 Fujitsu

Important notes
CE marking
CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedi rective
The shipped version of this device complies with the requirements of EU directives 2004/108/EC
"Electromagnetic compatibility", 2006/95/EC "Low voltage directive", 2011/65/EC "RoHS directive"
and 2009/125/EC "ecodesign directive" from 20 April 2016: 2014/30/EC "Electromagnetic
Compatibility" and 2014/35/EC "Low Voltage Directive").
CE marking for devices with radio component
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment
and mutual recognition of conformity.
CE nnnn (!) ; nnnn: For digits and exclamation mark (!), see label on the product.
You can find more information and declarations of conformity on the Internet at:
"http://globalsp.ts.fujitsu.com/sites/certificates".
This equipment can be used in the following countries:
Belgium Bulgaria Denmark Germany
Estonia Finland France Greece
UK Ireland Iceland Italy
Croatia Latvia Liechtenstein Lithuania
Luxembourg Malta Netherlands Norway
Austria Poland Portugal Rumania
Sweden Switzerland Slovakia Slovenia
Spain Turkey Czech Republic Hungary
Cyprus
Contact the corresponding government office in the respective country for current information on
possible operating restrictions. If your country is not included in the list, then please contact
the corresponding supervisory authority as to whether the use of this product is permitted in
your country.
Fujitsu 15

Important notes
FCC Compliance Statement
If the device complies with the FCC regulations, the FCC sign can be found on the type rating plate.
FCC Class B Compliance Statement
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television:
This class B digital apparatus complies with Canadian ICES-003.
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in strict accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Fujitsu is not responsible for any radio or television interference caused by unauthorized
modifications of this equipment or the substitution or attachment of connecting cables and
equipment other than those specified by Fujitsu. The correction of interferences caused by such
unauthorized modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The transmitters in this device must not be co-located or operated in conjunction
with any other antenna or transmitter.
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed
written permission from Fujitsu. Unauthorized modification will void the equipment
authorization from the FCC and Industry Canada and the warranty.
16 Fujitsu