Fujitsu FTP-642MCL001 User manual

1
FTP-642MCL001/002
FTP-642MCL301/302
■OVERVIEW
FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal
printer driven by 24 VDC, printing on 4-inch wide paper (112 mm/114
mm) .
This printer is compact and light weight, and the design allows easy
head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers, medical
instruments, etc. A printer with a specially designed cutter is also
available.
■HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu
Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light weight of
approximately 125 g.
• Low power consumption
The peak current for head driving is approximately 4.1 A (at 80
mm/s printing speed, 50% printing ratio).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut ) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
24V DRIVE, HIGH SPEED LINE THERMAL PRINTER
4” MECHANISM, WITH OR WITHOUT CUTTER
FTP-642MCL001
FTP-622DCL001
FTP-622CU101

2
■DESIGNATION
Part number
Standard
With Auto cutter
FTP-642MCL001/002*2
FTP-642MCL301/302*3
FTP-622DCL001/011*4
FTP-622DSL001/011*5
FTP-622CU101*6
FTP-622Y001
FTP-622Y201
FTP-622Y301
FTP-622Y401
Item
Printer mechanism
Interface board
■GENERAL SPECIFICATIONS
(Continued)
Centronics Standard
Serial (RS-232C)
Thermal head cable
Parallel (centronics) Interface cable
Serial (RS-232C) Interface cable
Power cable
LSI(MCU)
*2: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).
*3: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path).
*4: 001 /011 supports ANK and 101 supports ANK + Kanji (pages 98-103).
*5: 001/011/012 supports ANK and 111 supports ANK + Kanji (pages 98-103).
*6: CU101 supports Kanji and cutter control.
Part number FTP-642MCL001/002 FTP-642MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 832 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dot/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dot/mm)—Line feed pitch
Effective printing area 104 mm
MCL001/301 112 mm
Paper width MCL002/302 114 mm
Paper thickness 60~100 µm*160~100 µm*1
Cutting type ----------- full or partial
Number of columns 69 columns/line (24×12 dot font)
Maximum printing speed 640 dot line/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types JIS KANJI (FTP-622DCL101/111): approx.6800
24 ×12 dots, (3.0 ×1.5 mm), 69 columns
24 ×24 dots, (3.0 ×3.0 mm), 34 columns
16 ×8 dots, (2.0 ×1.0 mm), 104 columns
16 ×16 dots, (2.0 ×2.0 mm), 54 columns
SpecificationsItem
Character composition, dimensions (H×W),
Number of characters
Cables

FTP-642MCL001/002/301/302
3
Power supply
Dimension
Part number FTP-642MCL001/002 FTP-642MCL301/302
Interface Centronics (ESC/POSTM), RS232C
24VDC ±5%, Voltage
Current : average*2( ): Peak
For head 1.61 (2.03) A (at 80 mm/s printing speed, 25% printing ratio)
1.17 (2.03) A (at 50 mm/s printing speed, 25% printing ratio)
1.08 (1.16) A (at 30 mm/s printing speed, 25% printing ratio)
For motor 24VDC ±5%, 1.0 A maximum
24VDC ±5%, 1.0 A maximum
For cutter ----------
For logic 5VDC ±5%, 0.5 A maximum
Mechanism (cutter) 138 (W) ×48 (D) ×20 (H) mm (excluding lever) 147 (W) ×69 (D) ×42 (H) mm (w/cutter)
Interface board 131 (W) ×89 (D) ×24 (H) mm
Weight (Mechanism+Cutter) approximately 125 g approximately 450 g (w/cutter)
Mechanism Pulse durability : 1 ×108pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Expected life Wear resistance : 50 km (at 25% printing ratio)
Cutter ---------- 3 ×105cuts
Operating temperature 0 to +50°C*3
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (112 mm width) : FTP-040PU001, FTP-040P0701
For rear insertion use (114 mm width) : FTP-040P0020, FTP-040P0702
*Recommended papers
· Oji paper : PD150R, PD160R, PD170R
· NIPPON paper : TF50KS-E,TF60KS-E,TF60KJ-R
· MITSUBISHI paper Mills : P220VBB-1, AFP-235
SpecificationsItem
(Continued)
Environmental
conditions
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.

FTP-642MCL001/002/301/302
4
■DIMENSIONS
Mechanism
Unit: mm
20.1
(250)47.530.5
21.0
65.771.8
1
(137.5)
HEAD CONNECTOR
3-MOUNTINGHOLE(M2)
2-POSITIONINGHOLE
CENTER OFPAPER
HEAD UPLEVER(AT HEAD DOWN)
+
–
PAPER INSERTION(MCL001)
PAPER
INSERTION
(MCL002)
106.4(POSITIONINGHOLEPITCH)
Unit: mm
Mechanism with cutter
300±15
2—M 3burring (FIXING HOLE FROM BOTTOM SIDE)
42 53.5
(58.6)14.7
3—M 3(FIXING HOLE FROM UPPER SIDE)
(75.3)
39.1
13.3
3–2.0or less
71.8
±1
235
±15
(80.6)
MCL301
MCL302
93.0
106.4(POSITIONING H0LE)
147
Note:all dimensionsarenominalvalue.
1.4max.
73.0
PAPER
INSERTION
PAPER
INSERTION
CENTER OF PAPER

FTP-642MCL001/002/301/302
5
Interface board
Unit: mm
88.9 78.7
39.4 39.4
5.1
5.15.1
5.15.1
5.1
5.1
5.1
120.7
105.4
120.7
116.8
87.6
130.8
43.286.4
CN10
CN5CN2** CN3
CN1
CN8
CN13
CN11*
19.1
*CN11 on FTP-622DCL011/111 & 622DSL011/012/112only
**CN2on FTP- 622DSL only
4—ø3.6

FTP-642MCL001/002/301/302
6
■CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side: PHR-16 (J.S.T.) or equivalent
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
.oNlangiStnemmoC
1HVdaehrofrewoP
2HVdaehrofrewoP
3DNGdnuorgdaeH
4DNGdnuorgdaeH
51BTS1langiselbanetnirP
62BTS2langiselbanetnirP
73BTS3langiselbanetnirP
8*HT
1
noitcetederutarepmeT
94BTS4langiselbanetnirP
01TALlangisgnihctalatadtnirP
115BTS5langiselbanetnirP
21DDVcigolrofrewoP
31KLCkcolcnoissimsnartataD
41NIDlangistuptuoatadtnirP
51DNGdnuorgdaeH
61HVdaehrofrewoP
*1: Symbol: " " means a negative logic signal
1, 2, 3, ......................................15, 16
Motor Thermal head heat sink Head up level
Connector Pin No.
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
.oNlangiStnemmoC
1NESVrosnesrepaprofrewoP
2EHProttimeretpurretniotohP
3KHPedohtacretpurretniotohP
41WS1hctiwstcetedpudaeH
52WS2hctiwstcetedpudaeH
.oNlangiStnemmoC
1B noitaticxeliocrotomgnippetS
2B noitaticxeliocrotomgnippetS
3A noitaticxeliocrotomgnippetS
4A noitaticxeliocrotomgnippetS

FTP-642MCL001/002/301/302
7
■INTERFACE, COMMAND, OPTIONS
■FUNCTION
ITEM ITEM
1. Test printing 8. Cutter trouble detection
2. Paper-out detection 9. Motor power save
3. Paper near end detection 10. Mark detection
4. Head-up detection 11. MCU trouble detection
5. Abnormal temperature detection of thermal head 12. Power on/off sequence protection
6. Blown fuse detection 13. Motor protection
7. Abnormal voltage detection of head 14. Hardware timer
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and
Options.
4. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
oNroloCelbaCemaN
1etihW1noitisopemoH
2etihW2noitisopemoH
3deR+MlangisgnizigrenerotoM
4kcalB-MlangisgnizigrenerotoM
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu ComponentsAsia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices