Fujitsu FTP-628MCL053 User manual

1
FTP-628MCL053/054
FTP-628MCL053/054
nOVERVIEW
The FTP-628 MCL Series are battery driven high-speed
ultracompact printers with a 2-inch paper width equivalent.
Paper can be easily set using our unique platen release
mechanism.
The FTP-628 MCL Series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, banking terminals, and measurement
and medical equipment.
nHIGHLIGHTS
• Ultra compact
Height 15.5 mm, width 69.6 mm, depth 34.3 mm
• High speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing / Kanji supported
8 dots/mm of resolution printing is possible.
• Auto paper loading
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
• Two types of paper routes
Front or bottom feed, depending on the paper route.
• Easy mounting
Wiring for the head, motor, sensor are housed within one
 exiblecable(053,054)orintwocables(051,052).The
mechanism can be secured by one hook and two screws
at two locations, making mounting easy.
• RoHS compliant
BATTERY DRIVEN, FTP-608 Series
2” HIGH SPEED THERMAL PRINTER

2
FTP-628MCL053/054
nPART NUMBERS
nSPECIFICATIONS
Part number FTP-628MCL053/054
Printing method Thermal-line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Number of columns ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm+0
Paper thickness 60 to 100 µ m (some paper in this range may not be used because of
paper characteristics)
Printing Speed Maximum 80mm/sec. (640 dot line/sec.) at 8.5V
Alphanumeric, katakana: 159 types
International and special characters: 195 types
JIS Kanji level 1, level 2, non-Kanji
(supported only by FTP-628DSL228, DCL208): about 6800 types
12 ×24 dots, (1.54 ×3.0 mm), 32 columns: alphanumeric, katakana
24 ×24 dots, (3.0 ×3.0 mm), 16 columns: alphanumeric, katakana, Kanji
8 ×16 dots, (1.0 ×2.0 mm), 48 columns: alphanumeric, katakana
16 ×16 dots, (1.0 ×2.0 mm), 24 columns: alphanumeric, katakana, Kanji
SpecicationsItem
Character types
Character, dimensions (W×H), number of
columns
-1
(RS232C)S
rebmuNtraP
msinahcemretnirP )bonkdnahctiwsnoitcetednepodaehhtiwnoitresnirepaptnorf(350LCM826-PTF
)hctiwsnoitcetednepodaehhtiwnoitresnirepapmottob(450LCM826-PTF
gnivirdrofISL 1R (ANK only)03UC826-PTF
ecafretnI
draoB
lellaraP )scinortneC(003LCD826-PTF
laire 503LSD826-PTF
ecafretnI
selbac
lellaraP 202Y826-PTF
laireS 203Y826-PTF
rewoP
elbac
,daeH
rotom 204Y826-PTF
FTP-628CU601R
FTP-628DSL602R (V 2.0)
USB

3
FTP-628MCL053/054
nSPECIFICATIONS
*+5˚Cto+40˚Cprintingdensityassurancerance(-25to70˚Ccapability)
Item Specications
Interface Conforms to RS232C / centronics
Power supply For print head 4.2to8.5VDCaveragecurrent,0.87(0.93)Apeakvalue
(printratio:12.5%,printspeed:50mm/sec.at7.2V)
For motor 4.2 to 8.5VDC, 1A maximum
Note: 5.8 to 8.5V is recommended for automatic paper loading
For logic 3.0 to 5.25VDC, 0.1A maximum
Dimension
W x D x H
Printer
mechanism
MCL053 83.5x35.7x15.5mm
MCL054 72.3x34.3x15.5mm
Interface board 69.3 x 34.3 x 15.5mm
Weight Printer
mechanism
MCL053 Approximately 49g (with knob)
MCL054 Approximately47g
Interface board (std) Approximately 20g
Head Life Pulse resistance: 100 million pulse/dot
(using Fujitsu's standard driving method)
Abrasion resistance: paper traveling distance 50km (at 12.5%
print ratio or less)
Environmental
conditions
Operating temperature -10ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC
Storage humidity 5 to 90% RH (no condensation)
Detection Head temperature Detected by thermistor
Paper out/mark detect Detected by photointerruptor
Head up detection Detected by micro-switch
Recommended
thermal
sensitive paper
High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E2 (Nippon paper)
FTP-020PU001 (58mm)
PD150R (Oji paper)
FTP-020P0701(58mm)
Medium life paper TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R(Ojipaper)
P220VBB-1 (Mitsubishi paper)
Long life paper PD160R-N (Oji paper)

4
FTP-628MCL053/054
nDIMENSIONS
1. Printer mechanism
Unit: mm
Note: 1.Dimensionsarenominalvalue(tolerance±5unlessotherwisespecied).
   2.Platenunit(lever,platen,etc)movesbyapproximately0.7mmtowardpaperinsertiondirectionwhenplatenis
open.
FTP-628MCL054 FTP-628MCL053

5
FTP-628MCL053/054
Connector (FPC) specication
(1) Connector
Mechanical unit side: FPC connector
 Remoteside(housingsite): 52030-3071(madebyMolex)
(2) Pin assignment on the mechanical side
M I
M I
M I
M I
oN langiS O/I stnetnoC
1 KHP — rotpurretniotohprofedohtaC
2 NESV I rewoprosnesrepap
3 EHP O rotpurretniotohprofrottimE
4 1WS O hctiwsesaelernetalP
5 2WS I hctiwsesaelernetalP
6 HV I
rewopevirddaeH
7 HV I
8 ID I niataD
9 KLC I noitacinummocrofkcolcsuonorhcnyS
01 DNG —
daehlamrehtrofylppusrewopdnuorG
11 DNG —
21 6BTS I
langislortnocgnizigrenedaehlamrehT31 5BTS I
41 4BTS I
51 DDV I rewopcigoL
61 MT O 1lainmrettupnirotsiserevitisnesyllamrehT
71 MT O 2lainmrettupnirotsiserevitisnesyllamrehT
81 3BTS I
langislortnocgnizigrenedaehlamrehT91 2BTS I
02 1BTS I
12 DNG —
daehlamrehtrofylppusrewopdnuorG
22 DNG —
32 TAL I hctalataD
42 OD O tuoataD
52 HV I
daehlamrehtrofylppusrewoP
62 HV I
72 AT
langisnoitaticxerotomgnippetS
82 AT
92 BT
03 BT

6
FTP-628MCL053/054
nFUNCTION OF INTERFACE BOARD
metI metI
.1 noitcnuftnirptseT .8 noitcnufgnivasrewoprotoM
.2 noitcetedtuorepaP .9 noitcnufnoitcetedkraM
.3 noitceteddneraenrepaP .01 noitcetedytilamronbanoitarepoUCM
.4 noitcetedneponetalP .11 noitcetorpecneuqesFFO/NOrewoP
.5 noitcetedytilamronbaerutarepmetdaehlamrehT .21 noitcetorptnerruc-revorotoM
.6 noitcetedesuftuo-wolB .31 remiterawdraH
.7 noitcetedytilamronbaegatlovdaeH
Platen unit
Thermal head
Motor
Sensor (Photo-
interruptor)
30,29, .....................2,1
Connector No
(FPC pin numbers)
FPC
Connect terminal:
surface side
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel:(81-3)5449-7010
Fax: [phone]
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel:(1-408)745-4900
Fax:(1-408)745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: emea.fujitsu.com/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel:(65)6375-8560
Fax:(65)6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
Fujitsu Components International Headquarter Ofces
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
FujitsuComponentsAmericaoritsafliatesdonotwarrantthatthecontentofdatasheetiserrorfree.Inacontinuingefforttoimproveour
productsFujitsuComponentsAmerica,Inc.oritsafliatesreservetherighttochangespecications/datasheetswithoutpriornotice.
Rev. February 26, 2009.