Fujitsu FTP-628WSL210 Series User manual

Mobile Printer
FTP-628WSL210 Series
User's Guide
FUJITSU COMPONENT LIMITED

1
I In nt tr ro od du uc ct ti io on n
Thank you for purchasing the FTP-628WSL210 Series Mobile Printer
hereafter referred to as “this product”). (
This User's Guide (hereafter referred to as “this guide”) contains
precautions to use it safely and correctly.
Before using this product, please read the complete this guide.
I
n addition, please keep this guide handy for future reference.
If you have any suggestions or comments about this guide, please
o not hesitate to contact us. d
Bluetooth® is registered trademark of Bluetooth SIG.
Apple, iPod, iPhone and iPad are are trademarks of Apple Inc, registered in
the U.S. and other countries.
Android is trademarks of Google Inc.
All other product names and service names are trademarks or registered
rademarks of their respective companies. t
All Rights Reserved, Copyright FUJITSU COMPONENT LIMITED 2012

2
C Ca au ut ti io on ns s
■ Change of content
The contents of this guide and this product are subject to change without
prior notice.
■ Use in high safety applications
This product is designed, developed and manufactured for general use,
such as standard industrial, general, personal and household use. This
product is not designed, developed and manufactured for “high safety
applications”, such as an application which requires extremely high
safety, which may have a serious effect on society, expose individuals to
serious danger (death, personal injury, severe physical damage or other
loss), if extremely high safety is not assured (including, without
limitation, nuclear reaction control in a nuclear facility, aircraft automatic
flight control, air traffic control, transport control in a mass transport
system, medical equipment for life support, missile launch control of a
weapons system), or an application which requires extremely high
reliability (including, without limitation, submarine relay, space
satellite).
If you wish to use this product in an environment that requires high
safety, please consult with our sales representatives.
■ Copyright
This product and this guide are copyrighted works of
FUJITSU COMPONENT LIMITED.
This product and this manual must not be reproduced, duplicated, used,
or modified, partially or in full, without permission.

3
■ Regulatory Compliance
For Customers in USA (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void
the userʼs authority to operate this equipment. (Example- use only
shielded interface cables when connecting to computer or peripheral
devices).

4
For Customers in CANADA (Industry Canada)
This equipment complies with Industry Canada RSS210 rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
For Customers in EU (CE Marking)
This product is in conformance with the requirements of European
Council Directive:
R&TTE Directive 1995/5/EC
Applied standards:
EN 60950-1
EN 300 328
EN 301 489-1
EN 301 489-17
EN 50581
■ Export
This device may contain commodities, technology or software subject to
export laws and regulations from the US and other countries. Diversion
contrary to the country law is prohibited.
■ Warranty
We shall not be responsible for any failure caused by wrong operation or
usage in the wrong environment.
Moreover, we cannot be responsible for the loss, the passive damages or
the claim by a third party, even if it is caused by use or failure of this
product.
In addition, this productʼs range of failure will never exceed the amount
of money paid for it.

5
S Sa af fe et ty y C Ca au ut ti io on ns s
■ Explanation of Symbols
The following symbols are used in this guide. Please read and
nderstand the meaning of each symbol in this guide. u
If this product should malfunction, immediately stop using it, and
contact your sales representative.
Danger
Indicates an imminent risk of causing severe
personal injury or death if not used properly.
This level is not described in this document.
Warning Indicates possibility of causing severe
personal injury or death if not used properly.
Caution
Indicates that a minor or some personal injury
may occur or that the product itself or other userʼs
roperty may be damaged. p
Indicates an action that must not be performed.
Detailed description is on the side of this symbol.
Indicates danger, warning and caution.
Detailed description is on the side of this symbol.
Indicates an action that must be performed.
etailed description is on the side of this symbol. D
Important Indicates important points by using this product.

6
■
General Cautions
Warning
Break-
down
- Do not use in the environment with corrosive gas or salt
wind is present.
Failure to observe this may cause failure.
Modify
- Do not modify or disassemble.
Failure to observe this may cause fire, explosion or
breakdown.
Fire
- Do not burn or heat.
Failure to observe this may cause smoke, fire or breakdown.
Fire
- Do not pour water.
This equipment is not waterproof. Failure to observe this
may cause fire, explosion or breakdown.
Fire
- Do not use or store the equipment in a hot
environment.
Failure to observe this may cause smoke, fire or breakdown.
Fire
- Do not throw or drop.
Failure to observe this may cause fire, explosion or
breakdown.
Fire
- Do not use with wet hands. Do not drip or drop liquid
such as drinking water, clips or other foreign matter.
Failure to observe this may cause fire or electric shock.
Fire
- In the event of heat, unusual smells, smoke or
excessive noise while using the product, please stop
using it immediately. Unplug the power cable, remove
the battery.
Failure to observe this may cause fire.

7
Caution
Injury
- Do not use while driving a vehicle or walking.
Failure to observe this may cause traffic accidents and
injuries.
Break-
down
- Do not use the printer near the equipment that
generates large radiation noise, such as a high voltage
device and a large motor.
Failure to observe this may cause malfunction or breakdown.
Fire
- Do not use under direct sunlight or dusty environment
that contains the oil and iron.
Failure to observe this may cause heat, fire or failure.
Fire
- If charging is not completed within the specified time,
unplug the charger and stop charging.
The battery may leak by overcharging.
Fire
- Do not apply force to the cable.
Failure to observe this may cause fire or electric shock.
Break-
down
- Keep the power line away from other devices which
generate noise. (Large motor etc.)
Failure to observe this may cause malfunction or breakdown.
Failure
- Before using this product, be sure to read complete
user's guide.
It may cause the failure by incorrect use.

8
■
Printer
Warning
Accident
- Do not use the printer in a location where radio wave
generation is prohibited.
Might cause accidentally a malfunction of the instrument.
Burn
- During or immediately after operation, do not touch the
print head, the support plate and the motor. Heat is not
immediately discharged.
Failure to observe this may cause burn injury.
Fire
- Do not put metal objects or flammable objects into the
gaps of the case.
Failure to observe this may cause fire or electric shock.
Burn
- Surely turn off the printer's power and confirm that the
printer head is sufficiently cooled down before cleaning.
Failure to observe this may cause burn injury.
Caution
Injury
- Never insert fingers or metal into the paper insertion
and/or eject slots of the paper cutter.
Failure to observe this may cause equipment failure or injury.
Injury
- Be careful not to get a hand or hair caught in moving
parts.
Failure to observe this may cause burn injury.