Fujitsu FI-5530C2 Configuration guide

Cleaning Instructions for
fi-5530C2 Scanner
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables Part Number
Consumable Kit CON-3334-004A
Cleaning Kit SC-CLE-WGD
Using F1 Impregnated Cleaning Wipes

Pad Assy
Wipe downwards. When cleaning take care to prevent the cleaning wipe from catching on the
metal parts.


Turn the Scanner OFF while cleaning the following locations
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface.
P.T.O.

Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.
BEFORE CLEANING
Open the ADF while pressing
the cover open button
ADF Button



Plastic Rollers
Feed Rollers
Glass
Pick Roller
Pad Assy


Eject Rollers


Feed Rollers x 2
Clean lightly taking care not to roughen the surface.
For further information please refer to the
fi-5530C2 Scanner Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd Cleaning Instructions for fi-5530C2 Scanner



Plastic Rollers
Feed Rollers
Glass
Pick Roller
Pad Assy


Eject Rollers

Eject Rollers x 2
Clean lightly taking care not to roughen the surface.
Open the ADF only if the Function Number Display is
showing “1” through “9”.
Simultaneously hold down the “Send to” and “Scan”
buttons on the operator panel. The Feed Rollers will
start to rotate slowly.
As a guideline, 7 presses of the “Send to” and “Scan”
buttons make the rollers rotate one full turn.
Send to
Scan
Function
Function
Number
Display
LED
Power Button